|
|
Advertisement
|
Micro Plastics, The Worlds Largest Manufacturer of Threaded Nylon Fasteners
Machine Screws, Nuts, Washers, Standoffs, Spacers, Rivets, Clamps, Clips, Knobs, Printed Circuit Board Hardware, Panel Fasteners, Wire and Cable Hardware. - - - FREE SAMPLES
|
|
|
|
Materials & Material Processing
(Showing headlines 181 - 200) << 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 ...
|
Plastic Bottles provide moisture and oxygen barrier.Alcan, Inc.
Montreal, QC H3A3G2
May 13, 2008
Optimizing shelf life of pharmaceuticals, StabilitySolutions(TM) DRY consists of bi-layer desiccant container for oral solid products. Technology incorporates desiccant material into product contact layer, eliminating need for desiccant sachet or canister. Also intended for oral solid dose products, tri-layer StabilitySolutions(TM) BARRIER container sandwiches ethylene vinyl alcohol between 2 layers of high-density polyethylene for oxygen and moisture protection.
|
Photoresist Strip Product adresses BEOL/FEOL applications.Mattson Technology, Inc.
Fremont, CA 94538
May 13, 2008
Alpine(TM) system is designed to meet requirements of photoresist strip processes on back-end-of-line (BEOL) and front-end-of-line (FEOL) applications for future technology nodes. While etch chamber offers optimal profile control, inductively coupled plasma source and bias capability enables independent control of ion energy and density at low pressures to minimize damage to low-k materials for sub-65 nm processing. High-speed vacuum and atmospheric robotics promote throughput.
|
 Nanomaterial offers alternative to nanotubes.Angstron Materials LLC
Dayton, OH 45404
May 12, 2008
Offered in thicknesses from 0.34-100 nm and widths of 0.5-20 microns, carbon-based Nano-Graphene Platelet material demonstrates electrical conductivity similar to copper and high thermal conductivity. Product comes in several forms, including raw materials and solutions, and maintains uniform dispersion without degrading viscosity. It is suited for aerospace, automotive, energy, marine, electronics, construction, medical, and telecommunications applications.
|
 Portable Shaker helps verify accelerometer/sensor performance.IMI Sensors, Div. of PCB Piezotronics
Depew, NY 14043-2495
May 12, 2008
Operating at 159.2 Hz, hand-held Model 699A02 delivers controlled, 1 G rms or 1 G peak acceleration to test accelerometers and vibration sensors weighing up to 250 g. It features automatic shut-off to preserve battery life, external power jack for ac compatibility, mechanical stops for overload protection, and capability to perform up to 1,600 operating cycles in field. Unit also meets NIST traceability requirements.
|
 Vacuum Desiccator features 2 polypropylene stopcocks.Bel-Art Products
Pequannock, NJ 07440 1920
May 09, 2008
With overall capacity of 4,000 cubic in., 50 cm inner dia, and clearance for items up to 45 cm tall, Secador Techni-Dome 360 Vacuum Desiccator holds full vacuum at room temperature for 24 hr. Two stopcocks offer flexibility of using multiple gases or faster cycle times between vacuum and release. Each stopcock accepts 6.4 mm ID tubing and has PTFE plug, which turns easily to allow turbulence free entrance of air, minimizing disturbance of contents.
|
Barrier Film protects PV solar cells in tough environments.Honeywell International, Inc.
Morristown, NJ 07960-4648
May 09, 2008
PowerShield(TM) PV325 protects photovoltaic (PV) modules and their critical components in all types of environments such as humid conditions. It is UV-, moisture, - and weather-resistant, and can also withstand electrical load produced by modules. Based on barrier film technology, reflective white material has 5-layer design that includes 2 outer protective layers based on ECTFE fluoropolymer film and core PET layer, as well as 2 inner bonding layers of adhesive material.
|
 Cohesive Cold Seal Film features biodegradable design.Surface Guard, Inc.
Aurora, IL 60504
May 07, 2008
Available in clear, tinted, and co-ex film types, Biodegradable Cohesive Film creates secure, weather-resistant and tamper-evident packages. Product if formulated to biodegrade in months when buried or discarded in landfills, breaking down into mineral and organic compounds and leaving no toxic residue. Supplied in rolls from 3-80 in. wide and up to 5,000 ft long, film ranges from 2-5 mil thick and is suited for packaging soft goods, hardware, shoes, CDs, and DVDs.
|
 Oven Furnace accommodates high-temperature applications.Charles A. Hones, Inc.
North Amityville, NY 11701
May 07, 2008
Built to order with customizable dimensions, BTU outputs, and accessories, FireBox-HT oven furnace is designed for tool room heat treating and high-temperature (up to 2,150°F) precision casting. It is insulated with 4 ½ in. of firebrick, backed up with additional 2 in. of 1,200°F block insulation. Applications include heating tool steel, carbon steel, cast iron, and other high-temperature metals.
|
 Portable Mixers come with ¼ to 5 hp NEMA motors/gearmotors.Chemineer, Inc., A Unit of Robbins & Myers, Inc.
Dayton, OH 45401
May 07, 2008
Chemineer® DT Portable Mixers are engineered for handling applications in many markets including chemical and petrochemical, polymers, food and beverage, pharmaceutical, water treatment, FGD/energy, and biotechnology. They feature rugged cast aluminum housing, integral handle for positioning, multi-directional clamp for horizontal and vertical adjustment, optional cup plate mounting, threaded bung mounts for drum mixing, and chuck or flanged coupling shaft attachments.
|
Flux Cored Wire features stainless steel construction.Stoody Co.
Chesterfield, MO 63017
May 06, 2008
Stocked in popular sizes, including 308L, 309L, and 316L, 300 Series Flux-Cored Arc Welding (FCAW) Gas Shielded Wire comes in flat and horizontal versions as well as all position welding grades. All feature environmentally friendly wire basket and random wound wire, which lends to optimized deposition rate with minimal labor.
|
Tap Sieve Shaker comes in 50 and 60 Hz versions.Retsch, Inc.
Newtown, PA 18940
May 06, 2008
Combining horizontal circular sieving motion with vertical tapping motion, AS 200 tap is suited for particle analysis of abrasives, cement, and spices. Maintenance-free instrument works with sieves 200 mm or 8 in. diameter and covers measuring range from 20 µm to 25 mm. Serial interface allows for control, evaluation, and data management with EasySieve® software. Shaker comes complete with clamping device for sieve stack, software, and soundproof enclosure.
|
Exterior Stucco has Green formulation.Expo Industries
San Diego, CA 92121
May 06, 2008
GX2 Premium Exterior Stucco is manufactured with 10% post consumer recycled content which qualifies it for LEED points. Environmentally friendly product provides 25% more coverage than traditional stucco and also comes in lightweight bag. It is available in a variety of textures and colors.
|
Nickel Alloy withstands corrosive conditions.Arcos Industries, LLC
Mount Carmel, PA 17851
May 06, 2008
Capable of handling welding applications where superior seawater corrosion resistance is required, Arcos 803 (ECuNi) is covered electrode designed for shielded metal arc welding of wrought or cast 70/30, 80/20, and 90/10 copper-nickel alloys. It is also utilized to weld clad side of copper-nickel clad steel. Arcos 803 is suited for desalination plant, offshore construction, and marine environment welding applications.
|
 Injection Molding Service manufactures 3D metal parts.Cool Polymers
Warwick, RI 02886
May 02, 2008
By utilizing Xyloy(TM) metal alloy, metal parts can be injection molded on standard machinery and in tools designed for plastic. Finished parts can be textured or have standard finishes. In addition, molded parts can be painted and powder coated. Company will manufacture parts for OEMs that are seeking to find more productive ways to produce metal parts, or replace under-performing plastic parts with metal. Full art-to-part design and molding services are offered.
|
 Soldering Stations combine high power and adustability.American Beauty Soldering Tools
Clawson, MI 48017
May 02, 2008
Providing adjustable tip temperatures from 175-1,100°F, bench-top V36G Series industrial-grade soldering stations come with detachable stands and dross collection sponges. Featuring Ni-chrome compression wound heating elements, 100% encased in steel, and iron clad copper tips, they provide quick recovery times for soldering multiple joints and overcoming high heat sinking properties. Models with 20, 40, and 60 W power come with 1/8, 3/16, and ¼ in. dia tips, respectively.
|
Vent Exhaust Arrestor safely neutralizes chlorine.Severn Trent Services
Fort Washington, PA 19034-2707
May 02, 2008
To help keep buildings free from chlorine-related acid corrosion, Capital Controls® Type VEGA(TM) treats occasional chlorine gas vent releases that normally accompany chlorine container changeovers. Disposable chlorinator vacuum regular vent gas arrestor is 5 gal HDPE disposable container of chemically impregnated media, which reacts on contact to convert chlorine to harmless landfill-disposable salt. It eliminates combustion concerns and does not need neutralization prior to disposal.
|
 Mold Release Agents are non-flammable.Price-Driscoll Corp.
Waterford, CT 06385
May 01, 2008
Formulated with non-flammable solvent, Value Line series mold releases, mold cleaners, and rust preventives are EPA compliant and contain no Methylene Chloride. Mold releases types include silicones, paintable silicones, food/medical grade non-silicones, PTFE dry film, and Zinc Stearate dry powder. Gentle Clean Mold Cleaner is suitable for use on solvent-sensitive plastics and tooling, while Rust Armor rust inhibitor is suited for all metal molds tooling.
|
ESD Protection Device passes 20 kV ESD tests.California Micro Devices
Milpitas, CA 95035
May 01, 2008
Utilizing PicoGuard XS(TM) architecture, which integrates inductors with diodes to create fixed point impedance matching for high-speed data lines, XtremeESD CM1234 features 8 channels of ESD protection that meet ±15 kV contact discharge and ±20 kV air discharger per IEC61000-4-2 standard. Housed in 16-pin TDFN package, unit also meets 100 W differential impedance matching requirements of HDMI(TM) 1.3a and DisplayPort(TM) digital video standards.
|
 Clear Polyurethane Hose prevents build-up of static charges.Flexaust Co., Inc., The
Warsaw, IN 46581
Apr 30, 2008
Featuring surface resistance of 108-1010 W/sq, Flx-Thane® SD Hose has bronze-coated spring steel wire helix that drains charges to ground. Static dissipative hose is manufactured from FDA-acceptable materials with .030 in. thick wall and smooth interior. Suitable for light bulk material transfer applications where dust could pose explosion hazard, hose operates over -65 to 225°F range, and comes in 25 and 50 ft lengths with 2-12 in. I.D.
|
 Benchtop Orbital Shaker delivers uniform mixing action.Boekel Industries, Inc.
Feasterville, PA 19053
Apr 29, 2008
Offering smooth horizontal mixing motion and smooth soft start, microprocessor-controlled Flask Dancer can be programmed to operate unattended for periods up to 99 hr at speeds from 50-300 rpm. Included digital timer can be programmed to specific run time, causing unit to stop and alarm to sound when user-defined limit is reached. Able to operate in cold room or incubator, system offers 4 interchangeable platforms to accommodate various bottles, flasks, tubes, and beakers.
|
(Showing headlines 181 - 200) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117
|
|
|