GE Company GE Plastics    Pittsfield, MA 01201
Jun 18, 2007 LNP(TM) Verton(TM) Xtreme compounds - XC (extreme color), XFR (extreme flame retardance), and XW (extreme weatherability) - promote batch-to-batch consistency and help achieve optimal mechanical properties of long-glass-fiber reinforcement. Resistant to impact failure, compounds can be processed using standard and gas-assist injection molding, structural foam molding, and injection-compression molding. They can also be extruded into profiles.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Jun 15, 2007 VBUS054B 4-Line Bus Port Protection Diode Array protects dual high-speed USB ports or up to 4 other high-frequency signal lines against transient voltage signals. It offers capacitance of less than 1 pF and typical leakage current of less than 0.1 µA at maximum working voltage of 5 V, as well as breakthrough voltage of typical 6.5 V at 1 mA. Packaged in leadless LLP75 with 1.6 x 1.6 mm footprint, unit is available in 0.6 or 0.75 mm profile versions.

E-Components & Chains Limited    Pocklington, York YO42 1NR  United Kingdom
Jun 15, 2007 Blue in color, Detectamet Metal Detectable Engineering Plastic Detectathene is self-lubricating; resistant to abrasion, wear, and impact; and repels dirt and water. Material can be used in environments from -260 to +80°C and serves to dampen vibration and noise. Chemical-, acid-, and corrosion-resistant sheet sizes include 3 x 1 mt, 2 x 1 mt, 1.25 x 1 mt. Thicknesses range from 8-160 mm. Application examples include wear strips, liners, and general machined parts.

Conductive Compounds, Inc.    Londonderry, NH 03053
Jun 15, 2007 Designed for defibrillator pads and disposable EEG and EKG sensors, Models AGCL-510 and AGCL-675C silver chloride inks are used for gravure/flexographic, screen, and pad printing. They adhere to polyester, polyimide, polycarbonate, vinyl, urethane, and other plastic substrates. Featuring crease resistance and surface hardness, inks can be custom blended to adjust resistance values for required level of electrical conductivity and to adjust level of chloride to silver.

JJM Boiler Works    Southampton, MA 01073
Jun 14, 2007 Condensate neutralizing tubes raise pH level of discharged condensate from commercial boilers and warm air furnaces to near neutral level of 6.5-7.0 pH so it can be safely drained into sewer or septic systems. Offered in 5 sizes and configurations for heating systems ranging from 50,000 to 3 million BTU, environmentally friendly tubes comes with galvanized strut clamps as well as all necessary bolts and nuts required for installation.

MMD Components    Rancho Santa Margarita, CA 92688
Jun 14, 2007 Compatible with Pb-free reflow profiles, X series surface-mountable crystals can be used in any application where space is limited and frequency reference required. Ruggedized construction withstands vibration, shock, and temperatures up to 70°C. Offered with frequency range of 16-60 MHz and frequency tolerance/stability rate up to ±50 or ±100 ppm, hermetically sealed product comes in 4-pad ceramic package. Crystals are delivered on tape and reel for pick and place.

ESAB Welding & Cutting Products    Florence, SC 29501
Jun 14, 2007 Dual Shield X-Series provides welders with wide range of operating parameters including high deposition rates, fast travel speeds, flat bead profile, limited spatter, and slag removal. It includes wires for use with CO₂ or mixed gases, and wires for flat, horizontal, and all-position welding. Wires meet requirements for multiple weld procedures ranging from general fabrication to critical welding applications, and can be used in civil construction and ship building.

DuPont Co., Packaging & Industrial Polymers    Wilmington, DE 19898
Jun 14, 2007 Optilon(TM) Anti-Reflective Coatings are liquid formulations that enable manufacture of single-layer films, which minimize surface reflections on front of LCD displays. They also provide abrasion resistance, smudge resistance, neutral color, low haze, and high light transmission. Coatings will play key role in high definition TV picture quality by optimizing contrast and enabling bright, vivid colors.

SUSS MicroTec Inc.    Yokohama   Japan
Jun 14, 2007 Suited for R&D laboratories, universities, and pre-production environments, KADETT provides flexible and open platform for assembly and bonding of devices on variety of substrates. Semi-automatic machine performs accurate pick-and-place functions, and accurate alignment is achieved via vision system with 2 independent video microscopes and high-resolution (0.1 µm) XY alignment stage. Various bonding processes are available for forces up to 75 N.

UNIST, Inc.    Grand Rapids, MI 49512
Jun 11, 2007 Manual Mixing Station (MM-S) and Central Supply Mixing Station (CSM-S) are designed for blending and dispensing of cutting and forming fluids in manufacturing. Automated mixing and supply of fluids and lubricants to one or more machining or metalforming stations results in consistent concentration ratios. While CSM-S produces concentration ranges from 0.5-37% and delivers up to 3 gpm, MM-S has max concentration of 17% and dispenses up to 7 gpm.

Abresist Corp.    Urbana, IN 46990-0038
Jun 08, 2007 Made of hard aggregate material, cement binder, and micro and nano silica, KALCRET features mixing time of 5 min and can be applied overhead. Hard aggregate provides wear protection, while micro and nano silica fill pores between cement portions. Suitable for temperatures up to 2,192°F, KALCRET reaches high strength and wear resistance after 8 hr. It is available in troweled, cast, or sprayed-on versions for lining components with horizontal, vertical, inclined, curved, and flat surfaces.

HSA USA, LLC    Perth Amboy, NJ 08861
Jun 08, 2007 DNP-631 UV and DNP-IR IR Invisible Ink cartridges contain UV or IR dyes respectively, which are visible to the human eye when exposed to UV or IR light or by using laser scanner or camera system. Designed for high-speed, code-based packaging applications, inks assure packages are sent to intended recipients while protecting their privacy and security. Print cartridges can be snapped in and out and include high-capacity bulk ink delivery system.

Emseal Joint Systems, Ltd.    Westborough, MA 01581
Jun 08, 2007 Featuring acrylic-impregnated cellular foam core, SEISMIC COLORSEAL-DS fills and seals interior and exterior of structural joint openings in single step while insulating and attenuating sound. Both visible outer faces are coated with low-modulus, colored silicone bellows. Eliminating screws, anchors, and embedments, material self expands and is connected to substrates by inherent active backpressure combined with pressure-sensitive adhesive nature of impregnation medium.

Anver Corp. - Anver.Com    Hudson, MA 01749
Jun 07, 2007 Featuring remote power station, hoist-based VB-Series lets one person pickup and rotate cylindrical objects from side for stacking and loading operations. It offers variable speed control from creep to 115 fpm, and has 2 foam vacuum pad attachments to accommodate ribs and moderately uneven surfaces. Designed with lightweight aluminum and steel frame assembly, lifter-rotator comes with fingertip controls on handlebar, vacuum gauge, quick-release, and check valve.

Stratasys, Inc.    Minneapolis, MN 55344 2020
Jun 06, 2007 Featuring 8 x 8 x 12 in. envelope, FDM 200mc(TM) can build parts with 0.007 and 0.010 in. layers and uses soluble support technology for surface finish and detail. In simple mode, Insight(TM) software automatically manages production of parts, while in advanced mode, users can manipulate construction parameters to change mechanical properties of the part. This mode also allows users to pause building process to place inserts or change material colors.

LG Electronics USA, Inc.    Englewood Cliffs, NJ 07632
Jun 04, 2007 Featuring digital display with LED indicator lights, third rack for utensils and hard to clean flatware, 24 in. tall stainless steel tubs, and built-in food disposer, Models LDF9810 and LDF8812 operate at 45 and 46 dB, respectively. Model LDF9810 accommodates up to 14 place settings in single load, and features SteamDelicate cycle that protects fragile items such as stemware and china during washing. Both are available in stainless steel finishes.

Ross, Charles, & Son Co.    Hauppauge, NY 11788 0615
Jun 01, 2007 Suited for use in laboratory and pilot plant development efforts, Model 400DL consists of 1-3/8 in. dia rotor which is driven by 1 hp motor at speeds up to 10,000 rpm. Mixer is offered with attached 2.5 gal mix vessel and range of stator heads including slotted, round hole, fine screen, and Quad (4-stage) designs. All wetted surfaces are constructed in 316 stainless steel and special seals are available to enable operation in applications to 250 psi.

Dow Corning Corp.    Midland, MI 48686 0994
Jun 01, 2007 Providing environmentally friendly alternatives to solvents, Dow Corning® 930 consists of 100% active silicone fluid that maintains solid wetting and leveling performance in low-concentration UV-curing coatings. Dow Corning® 3217 low-molecular-weight, silicone-reactive intermediate offers thermal and weather resistance, making it suited for coil coatings, appliance finishes, and other high-temperature applications such as bakeware.

T. L. Fahringer Co.    Tampa, FL 33619
May 31, 2007 Designed to minimize number of broken and returned blades, AC-200 Two-Stage Weld/Anneal Control ramps blade up to desired temperature during first stage and maintains temperature throughout second stage. User can make adjustments to settings or stop cycle at any time during process. Able to control voltage during welding process, control allows for more heat during weld cycle, yielding consistent welds and preventing degradation and failure of mechanical switching.

Foam Design, Inc.    Lexington, KY 40581
May 31, 2007 In addition to cushioning metal products against shock, Rust-Shield(TM) contains Volatile Corrosion Inhibitor (VCI) compound that vaporizes and coats molecules on surface of metal to prevent corrosion. Product is suited for storing or shipping of metal parts. When parts are unwrapped, protective molecular layer immediately begins to dissipate. This leaves metal parts clean, corrosion-free, and ready to use.