FiberMark, Inc.    Brattleboro, VT 05302
Sep 29, 2008 Multicolor®70 and Multicolor®80 are available in 70 and 80 lb basis weights, respectively, in widths that complement book-binding processes and packaging applications. Range of 90 FSC-certified, acid-free, fade-resistant, and wear-resistant colors, including 8 inclusion papers and 6 parchment looks, also includes 8 embossing patterns that allow users to add texture to their designs. Range of Multicolor papers is offered with 30% post consumer waste recycled fiber.

Fomo Products, Inc.    Norton, OH 44203
Sep 29, 2008 Suited for sealing, coating, and stabilizing components of commercial vehicles, Handi-Foam® Commercial Vehicle 2-component spray foam acts as seal for vehicle's frame and undercarriage, fills holes from wire penetrations, and prevents moisture infiltration in headlight and taillight housing. It is available in disposable and refillable systems and features Magnum(TM) Heated System with heated hose that keeps foam at consistent temperature. Product cures in 30-45 sec.

Fomo Products, Inc.    Norton, OH 44203
Sep 29, 2008 Utilized for patching and repairing polyurethane roofs, Handi-Foam® SPF Roof Patch has R-value of 6.1/in., retaining insulation value and meeting commercial roofing codes for compression strength of polyurethane foam roofs. Offered in portable kit that includes Handi-Gun®, it maintains monolithic seal preventing air/moisture infiltration, and suits maintenance and repair work on HVAC systems. Foam has tack-free cure time of 30-45 sec and 2.5 lb density foam that can yield 425 board ft.

Master Appliance Corp.    Racine, WI 53403
Sep 26, 2008 Supplied in storage/carrying case, UT-100-TC Ultratorch® Professional Heat Tool Kit comes with everything needed to pinpoint heat, solder/desolder, remove SMT components, heat shrink, repair vinyl, spot dry, cut, or torch materials. It is based on portable, butane-powered UT-100 Ultratorch, which functions as soldering iron, flameless heat tool, hot knife, and brazing torch. Kit also contains soldering, hot knife, torch, and hot air tips; wire cutter; and needle nose pliers.

Adhesives Research, Inc.    Glen Rock, PA 17327
Sep 24, 2008 ARcare® 95000 is 4.0 mil, non-tacky, self supported, electrically conductive polymer film with low Z-axis resistance. Film can be coated with various pressure-sensitive adhesive technologies, coatings, or conductive inks to enhance functionality for specific applications. Also, formulation may be customized to alter properties including: conductivity, thickness (0.5-5 mils), flexibility, elasticity, elongation, and resistance to meet the specific application needs.

Rohm & Haas Co.    Philadelphia, PA 19106 2399
Sep 24, 2008 Paraloid(TM) BPMS 250, when added at levels as low as 2% of sustainable polylactic acid mixtures, increases melt elasticity without affecting clarity of final product. It adds higher melt strength as PLA is processed during film and sheet extrusion, blown film extrusion, or calendering. High molecular weight acrylic additive complies with U.S. Food and Drug Administration requirements and EU Directive 2002/72/EC, and also meets food packaging safety regulations.

Manncorp    Willow Grove, PA 19090
Sep 23, 2008 Measuring 50 x 30 in., lead-free Model C250 is equipped with adjustable corrosion-resistant finger conveyor, automatic defluxing, IR preheating, air-knife cooling, and low-volume solder pot. Machine is available in either single or dual wave configurations for through-hole and surface mount assemblies. It also includes built-in solder pot loading, maintenance platform with locking support mechanism, and dial-adjustable wave height control.

SABIC Innovative Plastics    Pittsfield, MA 01201
Sep 23, 2008 Optimized for weight and flame, smoke, toxicity (FST) performance, Ultem foam is suited for use as core material for aircraft composite skin/core/skin structures. It is based on Ultem polyetherimide (PEI) resin and demonstrates noise reduction coefficients greater than 0.3. Offered in 3.8, 5, and 6.9 lb/ft³ densities, foam boards are suitable for composite manufacturing processes and compatible with metals and thermoset laminate materials.

Stedman    Aurora, IN 47001
Sep 17, 2008 Type A Hammer Mills are up-running and feature 2-stage reduction principle for dual mechanical reduction, utilizing revolving hammers to shatter materials upon entry and then further disintegrating them against breaker plates. Both down-running units, Type B Heavy-Duty mills use reversible hammers and saw-tooth breaker plate while Type BX Medium-Duty includes feed opening supporting medium hard, lumpy, or bulky materials. All are available for various size reduction applications.

MacDermid Autotype, Inc    Schaumburg, IL 60173
Sep 17, 2008 Autosol XFT one-pot photopolymer emulsion is specifically formulated for use on computer-to-screen imaging systems. Fast exposing emulsion, suited for fully automated stencil production applications, has deep red color, optimizing color contrast for visual inspection after processing, and does not require sensitizing prior to use. Autosol XFT is designed for use with solvent and conventional UV curable inks.

Milliken & Co.    Spartanburg, SC 29304
Sep 17, 2008 Combining bright color and transparency of dyes with low migration properties of pigments, ViviTint(TM) colorants enable creation of special effects and aniline leather-like effects in synthetic leather products including shoes, handbags, and accessories. They are made without toxic heavy metals such as chromium, cobalt, and lead, which are associated with health risks. Available in 6 primary colors as homogeneous liquids, products can be incorporated into commercial resins.

Hexis S.A.,    Frontigna 34110 Frontigna  France
Sep 16, 2008 Suited for wide-format digital printers and installers, PC30M2 is 1.2 mil matt cast laminate designed for use on cast vinyls, both printed and full color, for applications on complex curved and corrugated surfaces. It features PE-coated release liner combined with clear acrylic solvent-based adhesive with UV-filter, ensuring protection against color fade and environmental aggressions. Available in rolls 54 in. wide and 55 yd long, unit offers smooth uniform surface.

Union Process, Inc.    Akron, OH 44313
Sep 16, 2008 Model Q-03 is bench-top, laboratory-sized circulation grinding mill that allows users to perform lab trials using smaller samples ranging from ½ to 1 gal. With ability to sample and make formulation adjustments on the fly, compact unit features high circulation pumping rate, narrow particle size distribution, and high temperature control.

Bematek Systems, Inc.    Salem, MA 01970
Sep 16, 2008 Compliant with 3A, USDA, and FDA standards, Z-Series Sanitary Wet Mixing Machines are designed for precise particle size and biomass size reduction of fruits, vegetables, and other foodstuffs from pulpy slurry to smooth, homogeneous viscosities. Suitable for in-line processing and featuring 316 SS construction, they employ abrasion-resistant milling head that features standard rotor and stator which can be modified to meet specific customer requirements.

Methode Electronics Inc. / dataMate Products    Chicago, IL 60706
Sep 15, 2008 Water-based product no. 9101 is highly conductive when printed with resolution of 600 dpi and does not require secondary curing or additional processing. When printed on glossy photo-grade paper, it has uniform, metallic-gold appearance. RoHS-compliant ink contains conductive silver nano-particles, and near full conductivity is achieved within few minutes of printing. Properties suit printed electronics, security printing, RFID, signage, display, backplane, and photovoltaic markets.

SWECO®, Div. of M-I L.L.C.    Florence, KY 41022
Sep 12, 2008 Designed for continuous operation, Vertical Roller Mill (VRM) performs efficient fine grinding and classification of soft to medium-hard materials. It is based on combination of TC/ALPHA classifiers and 2- or 3-roller mill body that can work with standard gear boxes. Due to integrated bearing system of roller table, mill does not need any reinforcement on gearbox itself and requires minimal maintenance.

Huron Technologies, Inc.    Leslie, MI 49251
Sep 12, 2008 Utilized to manufacture interior automotive components, Mold Release Coating 7642 is formulated to minimize build-up on mold surface, maintain desirable low-gloss surface for automotive interiors, as well as provide consistent surface appearance and release performance. Coating is packaged in 5 gal pails, 55 gal drums, and 345 gal totes.

Cool Polymers    Warwick, RI 02886
Sep 12, 2008 With inherent EMI/RFI shielding characteristics, non-corrosive CoolPoly® thermally conductive plastic provides low CTE and thermally conductive mass to help transfer/dissipate heat close from LEDs with no secondary interfaces at die level. At board level, it provides 3D molded substrates that transfer LED energy similar to ceramic boards and metal backed boards, and can be injection molded to net shape that serves as heat sink and mechanical enclosure at enclosure level.

Dynamic Conveyor Corp./Dyna-Con    Muskegon, MI 49441 6031
Sep 09, 2008 DynaCon® conveyors maximize flexibility in configuration by utilizing short (20 in.) modular roller sections, each with 5 rollers on 4 in. centers, to create lengths appropriate for application at hand. Available in 4-36 in. widths, gravity modules can be added/removed at will. Leg sets are available for adjustable height options, and high-impact polycarbonate construction of modules supports moving products that weigh up to 100 lb.

Unitex - Construction Chemicals    Kansas City, MO 64120
Sep 09, 2008 With up to 30% tensile elongation and ability to cure in -20 to +130°F temperatures, Pro-Poxy AWP high-strength epoxy-urethane hybrid is suited for extremely cold conditions, such as freezers, and those that endure extreme heating and thawing, such as parking structures, airport taxiways, and runways. Available in ready-to-use kit, product has no halo effect on surrounding concrete. Repaired areas can be open to traffic in as little as 15 minutes.