Momentive    Albany, NY 12211
May 21, 2009 Designed to replace regional fluids, Element14 PDMS 5 and PDMS 10 are low-viscosity polydimethylsiloxane polymers with temperature and oxidative stability, spreadability, lubricity, compressibility, low odor, low flammability, and non-oily, soft feel. Fluids are suited for variety of industrial applications, including polishes, paint and coating additives, hydraulic fluids, electrical insulating fluids, lubricants, water repellents, and mold release agents.

Quickparts    Atlanta, GA 30346
May 21, 2009 Offering chemical resistance, ULTEM material is suited for any digital manufacturing project, from functional prototypes to jigs and fixtures, to low volume production runs utilizing Fused Deposition Modeling process. With V-O rating for flame, smoke, and toxicity, ULTEM 9085 is certified for use on commercial aircrafts and has proven successful for electric/electrical components, microwave applications, pump and valve parts, and marine and automotive manufacturers.

Norplex Micarta    Postville, IA 52162
May 20, 2009 Consisting of multiple plies of woven fiberglass saturated with polyimide resin, P95 offers high mechanical strength and low coefficient of thermal expansion. Material maintains physical properties at temperatures up to 240°C, and other properties, such as compressive strength of 70,000 psi, low moisture absorption, and chemical resistance, allow use in variety of harsh environments. It is finished in 36 x 48 in. sheets with thicknesses ranging from 0.007-4.00 in.

Tyz-All Plastics, Inc.    Plainview, NY 11803
May 19, 2009 Available on sheets, ARO-TIES(TM) ATP 45, ATP 55, and ATN 45 Tie Strips are nylon plastic cable ties offered in range of sizes. High-density polyethylene ties are reusable and releasable, making them suited for closure and fastening strap and tie applications, including computer cables, wire harnesses, bags, containers, and cargo closures.

Readco Kurimoto, LLC    York, PA 17402
May 19, 2009 Designed for smaller continuous batch powder blending operations, RK Labmaster features touch screen control, speeds up to 5,800 fpm, and process modules from 1-12 quarts. These allow scalable production to larger size units while facilitating operation, monitoring, and cleanup. Also available, RK-1 one in. dia continuous mixer allows mixing of one or more dry or liquid ingredients. It can produce up to 10 lb/hr and discharges homogenous product at end of process.

Linde, LLC    Murray Hill, NJ 07974
May 19, 2009 Precision Clean 1000 uses CO2 snow to remove particles as small as 1 micron in diameter from lenses of image sensors after they are manufactured. Technology used will not damage delicate wire bonds and helps increase efficiency results as well as yield. Manufacturers have flexibility to choose in-line module for continuous production or standalone tool for batch production. Latter also offers load and unload capability for magazines.

MacDermid Autotype, Inc    Schaumburg, IL 60173
May 18, 2009 Suited for membrane switches, keypads, and fascia panels, Autotex Steel Film is manufactured using polyester substrate, coated with ink adhesion layer on reverse side and hardcoat outer layer, which is chemically bonded to substrate. Hardcoat has textured finish which, when film is printed on reverse side with chrome, metallic, or silver inks, creates appearance of brushed stainless steel or other metallic look. Offered in 0.006 or 0.008 in. thicknesses, film is abrasion- and chemical-resistant.

Surface Guard, Inc.    Aurora, IL 60504
May 18, 2009 Offered in 50-sheet case quantities for small runs or niche types of projects, Wave Flute has profile that creates eye-catching effect to draw attention to packaged products. Each sheet in case measures 40 x 29.5 in., and all sheets may be supplied in one of 6 standard colors: red, white, blue, black, green, and earth. Wave Flute can also be manufactured in custom colors, sheet sizes, and quantities as well.

MKS    Andover, MA 01810 2449
May 15, 2009 Suited for hazardous location printing and coating operations, ION POWER(TM) HL-Type Static Neutralizer controls static charges over range of 8 in. and at web speeds over 2,000 fpm. System facilitates networking of multiple neutralizing stations, protecting equipment, product, and operators. Series 8155 POWER MODULES connect with 8300 COMMUNICATOR modules through 2-wire RS-485 bus to transfer real-time data on neutralizer status, system diagnostics, and static control performance.

Huntsman Corp.    The Woodlands, TX 77380
May 14, 2009 Suited for rapid manufacturing applications, Araldite® Digitalis is based on MEMS system that cures liquid resin with UV light rather than lasers or reflected light. MLS MicroLightSwitch® units operate via computer-controlled micro-mechanical shutters that distribute UV light pixels onto resin surface, steering light to prevent scattering. Illuminating angle is 90° with micro-lenses used to ensure light uniformity and pinpoint accuracy.

Neutrex    Houston, TX 77065
May 13, 2009 Supplied in pellets without fines, Purgex 461 Plus blends low-linear polyethylene carrier and FDA-approved active ingredients that are non-toxic, non-abrasive, and safe for cleaning blown film and sheet lines in frequently purged extruders. It is recommended for color and/or material changes and removal of residual contamination; cleaning extruder, screen pack housing, and die/manifold; removing all types of color bodies, carbonized material, and degraded resins; and shut-downs.

Techspray Inc.    Amarillo, TX 79107
May 13, 2009 Designed to clean electronics, optics, and metal parts, Precision-V Solvents leave no residue, evaporate quickly, and are non-flammable with no flash-point. Parts Cleaner 1654 and Flux Remover 1655 have azeotropic properties that allow them to maintain stability as they are cycled in vapor-degreaser. Parts Cleaner removes oil, grease, silicone, and other industrial contaminants, while Flux Remover cleans R, RA, RMA, and SA type flux residues after reflow, wave, and hand-soldering.

Ultrasonic Power Corp.    Freeport, IL 61032
May 13, 2009 Fabricated from heavy duty stainless steel, Model UP-5424 135 gal portable ultrasonic cleaning system has large internal working dimensions of 54 x 24 x 24 in. Built-in generators deliver 3,000 W average output (6,000 W peak), and power 36 high performance Vibra-bar® transducers that are bonded to tank bottom and produce Simultaneous Multi-frequency(TM) insuring uniform and thorough cleaning. System offers short cleaning times of typically 3-5 min for average size lots of components.

Zoneworks    Milwaukee, WI 53223
May 12, 2009 Offering alternative for permanent walls or rigid panelized systems, insulated fabric wall systems act as barriers to separate inside dock from rest of facility, eliminating need to heat or cool space accessed by trucks. System incorporates TZ Series of insulated curtain walls capable of providing temperature separation up to 40°F. Modular wall panels are constructed of fire-retardant vinyl surrounding multiple layers of recyclable, anti-microbial polyester batting.

DuPont Co., Packaging & Industrial Polymers    Wilmington, DE 19898
May 11, 2009 Designed to meet needs of thin-film solar power generation, DuPont(TM) PV5200 Series assures glass adhesion with optimal visible light transmission. Clear, pliable material is available in thicknesses from 15-45 mils, and is suited for module encapsulation using nip-roll/autoclave and vacuum laminating.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
May 11, 2009 Providing optimal results on variety of wind tower seam welding applications, Lincolnweld® WTX(TM) features low temperature impact properties and is capable of producing Charpy V-Notch test results exceeding 20 ft-lbf at -80°F. It suits twin and multi-arc ac and dc operations, and offers smooth bead profile. Providing circumferential and longitudinal butt and fillet welds, multi-purpose flux meets F7A8-EM12K-H8 AWS classification when used in combination with Lincolnweld L-61 electrode.

Acrilex, Inc.    Jersey City, NJ 07305 1122
May 08, 2009 Measuring 4 x 8 in. with larger sizes also available, Acriglas® Combinations can be drilled, laser cut, glued, formed, hot stamped, and silk-screened. Color and clear sheets can be fused together for added depth, or several layers of different colors can be combined for edge effects. Suited for point-of-purchase display, store fixture, novelty, accessory, lighting, furniture, architectural, and sign or lettering applications, sheets can be custom cut or configured on-site.

Victrex USA, Inc.    West Conshohocken, PA 19428
May 07, 2009 Available in unfilled STG45 and glass-filled ST45GL30 grades, VICTREX® ST(TM) Polymer is suited for applications requiring combination of high temperature, mechanical performance, and dimensional stability. VICTREX STG45 offers optimal mechanical performance in temperature range of 302-392°F, while VICTREX ST45GL30 features heat distortion temperature of 716°F, opening up application opportunities for customers that work at temperatures over 572°F.

Quickparts    Atlanta, GA 30346
May 07, 2009 Black, ABS-like stereolithography resin, RenShape 7820, is designed for use on solid state SLA® platforms. It offers large working envelope of physical properties, as well as high elongation and impact strength suitable for building concept models and functional prototype parts. Low viscosity supports recoating during build as well as promoting drainage for faster cleaning. Green strength results in easy operation, fast part creation, and minimal finishing.

Dri-Air Industries, Inc.    East Windsor, CT 06088
May 06, 2009 Accommodating various tools and parts, 61-91 G series robots feature strip forward design of up to 600 mm that prevents interference of strip stoke with machine hoppers, feeders, and blenders. It includes beam-mounted control cabinet, minimizing floor space, as well as SCP control pendant with touchscreen for simplified programming and 3-position safety switch allowing left- or right-handed operation. Units also include digital AC servos with encoders on 3 axes.