Materials & Material Processing

Materials & Material Processing

Fountain Concentrate is used for sheet-fed presses.

Nov 30, 2001

Aqua Series 150 fountain concentrate for CTP plates on all types of sheet-fed presses minimizes attack on ink for brighter, truer colors. It contains ingredients that help control calcium related problems, and contains low VOCs (1.8 lb/gal. as determined by EPA Method 24) for safer environment. Read More

Materials & Material Processing

Conductive Ink prints onto components and cables.

Nov 30, 2001

Electrically conductive Type 102-05F screen printable ink, coating and adhesive can be printed onto ribbon cables, flex circuits and other components to provide EMI/RFI shielding. It bonds to Indium Tin Oxide (ITO) sputtered surfaces and can be applied as bus bars onto ITO sputtered surfaces. It adheres to glass, mylar, kapton, ultem and other surfaces. Applications include EMI/RFI shielding,... Read More

Materials & Material Processing

Powdered Antifoam will not clog or freeze.

Nov 30, 2001

Type TPA works in industrial and food processes to knock down foam. Made from silicone on sodium acetate base, free flowing non-toxic powder is totally water dispersible, has non-hygroscopic properties that prevent it from lumping, and cannot freeze or separate on standing. Users may add it directly to foaming systems or specialty formulators can pre-blend antifoams with other solid products.... Read More

Materials & Material Processing

Web Cleaning System scrubs off surface static.

Nov 28, 2001

System removes surface contamination caused by electrostatic attraction and triboelectrification during material manufacturing and slitting processes. It neutralizes web, maintains web in static free state during printing process, and keeps web static-free when rewound. Low-profile system requires only 3 in. above and below web, making it possible to fit narrow web machines. It is available for... Read More

Materials & Material Processing

Fabricated Rotary Retorts have support wheels and brackets.

Nov 28, 2001

Fabricated replacement batch retorts are used in carburizing and hardening furnaces used by manufacturers of ball and roller bearings, chains and fasteners. Fabricated from wrought stainless steel, retorts have homogeneous, small, and tight grain microstructure resistant to furnace environments. Accessories/components include front and rear wheels, front spacing wheels, rear gas inlet tubes, rear... Read More

Materials & Material Processing

Compound is used for underfill and encapsulating applications.

Nov 27, 2001

TRA-CAST 3108 two part epoxy casting paste works on wide range of surfaces, including glass, ceramics, metals, plastics, and many electronic materials. It is all-liquid, low viscosity product with good flow and wetting characteristics. Casting compound can be cured at room temperature with little or no shrinkage, and it resists all weather conditions, gases, galvanic action, petroleum fuels,... Read More

Materials & Material Processing

Molding Press compresses composite materials.

Nov 27, 2001

This 400 ton, down acting hydraulic compression molding press has 120 x 60 in. platens that are electrically heated with additional zones to assure temperature uniformity. It has integral hydraulic system, programmable control system, adjustable pressing speed, automatic bump cycle and audible alarm for cure cycle end. Press has reinforced moving bolster for rigidity and stability, fast close... Read More

Materials & Material Processing

Ceramic Adhesive makes high temperature bonds.

Nov 27, 2001

Ceramabond 503 inorganic, water-soluble, alumina-filled adhesive system bonds nichrome heating element wire to mica ceramic parts so as to immobilize and electrically insulate wire from high temperature, high velocity air flows. It resists temperatures to 3200 ºF, can be applied by spatula, syringe or brush, cures in 1-2 hr at 700 ºF, and strengthens further to lap shear strength of 800-900... Read More

Material Handling & Storage, Materials & Material Processing

Reaction Vessel is stirred with magnetic-drive mixer.

Nov 20, 2001

PC Series pre-packaged system includes contamination-free, leakproof magnetic-drive mixers. Vessel also features support stand, bottom flush valve, drive motor, rupture disc assembly, pressure gage, full-body spiral-baffled heating jacket or electric mantle heater, cooling coil, thermowell, and sample tube. It is available in 5, 10 and 20 gal, making it suitable for pilot-scale research and batch... Read More

Materials & Material Processing

Batch Control skids into the job.

Nov 19, 2001

Multi-Purpose Skid batches raw materials into reactors/mixers from storage tanks or directly from tanker trucks, and batches products from reactors/mixers into storage tanks or directly into 55 gal drums. It eliminates the need for dehydrated transfer pumps and piping, raw material storage tanks, drum scales and batching equipment. Read More

Materials & Material Processing

Portable Mixer is impelled to agitate.

Nov 19, 2001

XPress mixers have industry-standard, off-the-shelf, NEMA motors or gearmotors with direct or gear-reduced drives. Options include sleeve or chuck shaft couplings, C-clamp or cup-plate mounting, wide range of impeller selections, and choice of 1/2 to 2 hp motors. Each has 30-day no-risk trial. Read More

Materials & Material Processing

Alumina Ceramic makes lamp bases.

Nov 15, 2001

Aremcolox 502-1400-FF fully sintered 96% high-density alumina ceramic has compressive strength of 340 Kpsi, dielectric of 225 V/mm, temperature resistance to 3000ºF, and resists corrosion and wear. Parts are fabricated via injection molding, isostatic pressing and machining processes. Lapped, polished and metallized surface finishes are available. Applications include molded high-temperature... Read More

Materials & Material Processing

Ultraviolet Flood cures UV adhesives on benchtop.

Nov 09, 2001

ZETA 7411 ultraviolet flood system cures UV adhesives on various sized parts. Medium intensity, modular light system has metal halide lamp that irradiates UVA and UVB ultraviolet light in typical cure area of 8 in. square. Lamp contains glass filter to reduce short and medium wavelength lamp emissions. It can be pedestal mounted or detached from the lamp base assembly for mounting over existing... Read More

Materials & Material Processing

Parts-Cleaning Systems meet EPA guidelines.

Nov 08, 2001

Omega® systems use non-toxic soaps and ultrasound to automatically degrease, clean and prefinish parts and components. Units feature fully insulated tank bodies and non-immersion, silicone blanket heaters. Models include Omega Pro® at 1000 W of ultrasound power with 3.5 cu ft bath, Omega Pro Plus® at 2000 W with 5 cu ft bath, Omega Pro Force® at 2000 W with 7 cu ft bath, and Omega... Read More

Construction Equipment and Supplies, Materials & Material Processing

Cement Resurfacer dries in 24 hours.

Nov 08, 2001

P-205 EASY-FIX thin pavement overlay repairs uneven concrete surfaces, and is suitable for permanent repairs to sidewalks, drives, aprons, docks, and ramps. Able to resist freeze/thaw cycles, it adheres to damp surfaces. De-icing salts and water will not penetrate it. Application is accomplished via broom for textured, concrete, gray, non-slip surface that dries in 24 hours. Read More

Materials & Material Processing

Parylene System modifies pressures and dwell times.

Nov 08, 2001

PDS-2060PC Parylene deposition system, with integrated personal computer for programmable control, allows users to establish and refine programs that direct each phase of Parylene coating cycles. System includes on-board personal computer, fold-out keyboard, flat-screen monitor, and printer that operate under Labview(TM) software. Proprietary software prompts users for each parameter from vacuum... Read More

Materials & Material Processing

Propeller Mixers suit pressure and vacuum vessels.

Nov 08, 2001

Portable or Fixed-Mount Propeller Mixers provide strong axial flow pumping characteristics via their impeller. Impeller shape and style allows impeller to be positioned as low as 1/2 or as high as 3 times impeller diameter from bottom for batch volume flexibility. Mixers can be angle-mounted off-center, and may be combined with scraped-surface action of anchor-style mixers to provide dual or... Read More

Materials & Material Processing

Replacement Gauge Glass is available in 2 configurations.

Nov 08, 2001

Replacement borosilicate gauge glass is available in sizes from 1 to 9 in transparent and reflex configurations. High-pressure gauge glass, with flatness tolerance of 0.002 in., is also available. Transparent gauge glass lets light pass through and makes liquid level visible. For fluids that are erosive or corrosive to borosilicate glass, protective shields can be incorporated. Reflex glass uses... Read More

Materials & Material Processing

Solder Paste produces consistent joints without cleaning.

Nov 08, 2001

SolderPlus No Clean solder paste prepackaged alloy/flux blend is formulated for controlled application by automatic dispensing equipment. It provides control and speed in production soldering processes by producing consistent solder deposits without needing to remove flux residue. This tacky paste is suitable for electronic, electromechanical and telecommunications applications. Read More

Automatic ID, Materials & Material Processing

Laminates prevent ID card counterfeiting.

Nov 08, 2001

DuraGard® registered OVD (Optically Variable Device) laminates provide security through high-resolution, computer-generated holographic imagery that cannot be copied or reproduced with conventional scanning and printing systems. They provide tamper-evidence that reveals any attempt at alteration or forgery. Read More