Lehigh Fluid Power, Inc.
Lambertville, NJ 08054
Nov 06, 2009 Designed to reduce energy consumption, JHDG GREEN Series combines Miracalube piston lubrication system with Dual Max pressure control regulator and ILCN seals. By reducing operating pressure when it is not needed, Green series cylinder reduces demand for compressed air. Solution is available in 1.5-6 in. bore sizes with strokes from 0.5 to over 120 in.

Pro-Link, Inc
Canton, MA 02021
Nov 06, 2009 Radiant Power dispenser system is environmentally preferable air care solution for all facilities, especially those with limited or no airflow. System automatically turns on for 5 seconds, dispensing fast-acting odor counteractants available in variety of fragrances, and then off for 15 seconds, ensuring consistent odor control. Fragrance-free refills are available as well, and all last up to 60 days.

Spiroflow Systems, Inc.
Monroe, NC 28110
Nov 05, 2009 Using automatic gain in weight adjustment to monitor and compensate for any weight variation, Model C1-2 can achieve filling rates up to 20 bags/hr, depending on flowability of product and storage hopper or conveyor used. Programmable one-touch controls enable operator to control filler operations as well as upstream in-feed devices. Offering accuracy within 1%, filler is suited for chemicals, food, dairy, pharmaceutical, plastics, minerals, and aggregates.

Walker Magnetics Group, Inc.
Worcester, MA 01606
Nov 05, 2009 ExBeam products are available in Ex 10 model, which expands from 2-6 ft and has lifting capacity of 2,200 lb. It can be used with 2 Neo-250 or 2 Neo-500 lift magnets. Offering lifting capacity of 8,000 lb, Ex 12 expands from 3-6 ft and is used with 2 Neo-1000 or 2 Neo-2000 lift magnets. On each, lifting lug that supports magnets is manually adjustable and devices, designed for lifting steel, can also be used with logs or paper rolls when used with slings/chains.

Schunk
Morrisville, NC 27560
Nov 04, 2009 Pneumatically driven RST series compact ring indexing tables include RST 18 with 70 x 70 mm footprint, 1.2 Nm torque, and maximum axial force on cycle ring of 1,950 N. Model RST 24, measuring 100 x 100 mm, offers 4 Nm torque and axial force of 3,400 N on cycle ring. Both can cycle left, right, or alternate without modifications. They allow working process to be stopped, reversed few steps, and processing step in question to be repeated should error occur.

Walker Magnetics Group, Inc.
Worcester, MA 01606
Nov 04, 2009 Comprised of 6 models to fit various lifting applications, Circular Electric Lift Magnets (CER) Series can be switched on/off from up to 15 ft away via wireless (IR) remote. Degree of magnetic field penetration minimizes susceptibility to adverse surface conditions. Dual-button release design promotes safety in remote and on-board rectifier, and magnets will not lift if contact is not secure. Also, products cannot be shut off accidentally when lift is in progress.

Hydratight
Red Wing, MN 55066
Nov 04, 2009 Suited for use on hard-to-reach pipe flanges whose integrity must be maintained, QuickFace has self-centering design with adjustable collets and clamps that provides concentric operation and accuracy. Portable tool weighs 15 lb and uses ½ in. cutting tools. Interchangeable lead screws make it suitable for resurfacing damaged raised-face and lens-ring joint flanges to varying finish standards. Rotated by hand, tool employs worm-gear mechanism that provides spiral gramophone finish.

Boge American, Inc.
Powder Springs, GA 30127
Nov 04, 2009 Boge CL 10 and CL 20 screw compressors feature high-performance damping and lamellar graphite casting which ensure silencing that produces sound pressure levels as low as 59 dBA. Featuring compact design suitable for workshop environments, devices are available in standard pressure of 150 psi and with output capacity range from 37-79 cfm. Components and parts are accessible from one point, simplifying service and maintenance.

AMOT Controls Corp.
Houston, TX 77064
Nov 04, 2009 Suited for underground mining or similar applications calling for Group 1 certification, Chalwyn SVX electronically operated air intake shutdown valve has non-sparking zinc alloy body and solenoid cover. Failsafe valve helps to prevent potential explosions from diesel engine ignition wherever there is combustible gas, vapor, or dust hazard. Designed for air intake diameters from 1½-8 in., butterfly valve can be flange or hose mounted.

Instron
Norwood, MA 02062-2643
Nov 03, 2009 Available in 1, 2, 5, and 10 kN options, 2712-04x Series features fully enclosed self-centering mechanism suitable for gripping plastics, metals, textiles, paper, and foil. Dual-action gripping force allows operator to maintain axiality of loading without having to adjust for changes in specimen thickness. Additional features include air valve to open and close grips, lock nut that removes backlash, and large throat area, which offers room for operator fingers and minimizes pinching.

Techno Sommer Automatic
New Hyde Park, NY 11040
Nov 03, 2009 Available in 8 different sizes starting at 12 x 10 x 26 mm, MGW800 Series is suited for assemblies and multiple pick-and-place applications. Grippers offer grip torque up to 39.36 lbf-in. and stroke per jaw of 37.5°. Miniature size allows manifolding through bottom mounting surface, eliminating side air fittings. Jaw position, whether opened or closed, can be sensed through use of magnetic sensors, providing positive feedback.

Schunk
Morrisville, NC 27560
Nov 03, 2009 Measuring 10 x 10 in. and suited for 5-axis machining centers, UNILOCK NSA SF achieves precise centering using 4 short tapers on corners, which also compensate for torques and tilting moments. Single clamping module generates 16,860 lb of force. UNILOCK NSA SF is failsafe, using 4 spring driven form-fit, self-locking clamping slides into centering sleeve that can be monitored. To unlock clamping modules, standard air supply pressure of 6 bars is sufficient.

Jescraft
Bogota, NJ 07603
Nov 03, 2009 PRO-LITE carts are available in 16 models, and in varying widths of 20, 24, and 28 in. and 3 bumper styles. All 12 in. deck models have load capacity of 3,200 lb and range in weight from 60-70 lb, while 18 in. decks can carry up to 3,600 lb and weigh 70-80 lb. Non-marking, 8 x 2 in. elastomer swivel casters offer maneuverability over all types of surfaces. Units are offered with 2 types of decks; heavy-duty steel plate or replaceable, impact-resistant ¼ in. thick UHMW polyethylene.

QComp Technologies, Inc
Greenville, WI 54942
Nov 02, 2009 Able to accommodate less than perfect pallets, plug-and-play Automated Pallet Dispenser utilizes integrated scissor lift and feed conveyor to dispense or stack pallets, and provides area for stacked pallets to be staged in front of downstream processes. Designed to integrate with QComp palletizers, dispenser includes wide chain to protect pallets, Rockwell Micrologix PLC, and Panelview Plus 600 HMI.

Colson Caster Corp.
Jonesboro, AR 72401
Nov 02, 2009 Enforcer fork casters feature kingpinless design with single-ball raceway, providing tight tolerance and limited play in swivel motion. Mid- to heavy-duty products offer side-lock and tread-lock brakes on 4 and 6 series, which can also include extended lead for towline applications and DirtBan seal in upper raceway. Tread-lock brakes are available for 7 and 8 series products.

SAS Automation, Ltd.
Xenia, OH 45385
Oct 30, 2009 Distributing force evenly over entire contact area, Internal Diameter Gripper (IDG) is designed for heavy, fragile, and irregular shaped parts. Product grips and releases on command. Rubber strips ensure secure grip, while customizable nose adapter can be used for locating or part stabilization.

OK International, Inc
Suwanee, GA 30024
Oct 30, 2009 Soldering and rework system, MX-500, is available with MX-PTZ precision tweezer hand-piece that is ergonomically designed to meet requirements for reworking small electronic components, including 0201. Tweezers enable user to remove and replace components, with targeted application of heat, to soldered connections of devices while mechanically gripping component for removal. Tweezer-action and dual-position pitch adjustment enable operator to size pincer-action to component width.

Davis-Standard Corp.
Pawcatuck, CT 06379-2313
Oct 29, 2009 Available for retrofit to existing 3½ in. Davis-Standard extruders, Hinge-Roll Feedsection offers uniform, consistent feed rate and adjusts automatically based on feed strip size. Feedroll and interior of feedsection are accessible by unfastening 2 swing bolts and lowering attached swing-down cartridge by means of electro-mechanical cylinder. Belt drive eliminates lubrication requirements and belts automatically loosen for feedroll removal.

Henkel Loctite Corporation
Rocky Hill, CT 06067
Oct 29, 2009 Used to dispense anaerobic flange and gasket sealants from 50 ml tubes, Loctite® 50 ml Tube Squeeze Dispenser provides smooth and consistent adhesive flow. Ergonomic, trigger-controlled dispense gun eliminates tube squeezing and provides controlled positioning of adhesives. Manually operated dispenser incorporates pivoting tray that facilitates tube changeover. Design completely empties tube, reducing adhesive waste and conserving material expenditure.

Modern Process Equipment, Inc.
Chicago, IL 60623
Oct 29, 2009 Capable of moving products without use of air, Chain-Vey(TM) Conveyor transfers particle blends without risk of segregation or breakage. Suited for products including ground coffee, dried foods, material chips, and activated carbon, unit is available in sizes of 4, 5, and 6 in., and can convey up to 300 ft. Sealed tube contains aroma and allows for air-tight conveying, while self-cleaning feature eliminates cleaning between change-over.