Material Handling & Storage

Meticulously Designed Yale® Three-Wheel Stand Receives Bronze Product of the Year Award

May 16, 2016

GREENVILLE, N.C.  - The 28th annual Plant Engineering Product of the Year Award program celebrates cutting-edge, innovative product development. Such innovations advance the industry with new levels of productivity, accuracy and efficiency to drive maximum benefits for end users. Yale Materials Handling Corporation announces its ESC030AD three-wheel stand has been honored as a bronze Plant... Read More

Material Handling & Storage

Extruded Aluminum Stand enables machine mobility.

April 29, 2016

Constructed with heavy-duty 80 mm square extruded aluminum frame, Machine Stand enables customers to move CNC engraving machine while still maintaining machine's rigidity during cutting process. Stand has ¾ in. polypropylene top deck that provides workspace for CNC machine tools. Four heavy-duty casters, 2 with locks, allow machine to be transported around facility, then locked and secured in location when machine is in operation. Read More

Material Handling & Storage

Roll Stand features unwind tension control.

April 12, 2016

Designed as simply supported Shifting Roll Stand (SRS) on quad raceway assemblies with A-frame construction, SRS4-R15-U can accurately unwind mid- to large-range web widths with rolls up to 2,500 lb. Integrated complete Montalvo Unwind Tension Control System provides precise, automatic, and total control of web tension and alignment as it enters converting/printing process. Along with All-Air guiding system, features include safety chucks and continuous leaf core shaft. Read More

Material Handling & Storage

Exceptional Design Lands Yale® Three-Wheel Stand GOOD DESIGN Award

February 29, 2016

GREENVILLE, N.C. – Yale Materials Handling Corporation announces it has received a 2015 GOOD DESIGN award for its ESC030AD three-wheel stand. The GOOD DESIGN awards, which are presented by the Chicago Athenaeum Museum of Architecture and Design, honor the best industrial designers and world manufacturers for their pursuit of extraordinary design excellence. The three-wheel stand was selected... Read More

Material Handling & Storage, Non-Industrial Products

Stand Out From The Crowd

February 25, 2016

A wave of creativity has washed over our production team...these premium stands add style to their everyday utility. From left to right are: The Scroll Top Frame stand, slide-in access for adding your printed sign (aluminum blank included). The Smoker's stand, an upscale look for any smoking area. The Information stand, bolt on plate secures display of menus, attraction highlights, or... Read More

Material Handling & Storage

Reel Stand features 6,000 lb capacity.

January 29, 2016

Designed to safely dispense spools of cable, RXM Reel Stand weighs just 35 lb, allowing for transport around job site. Pair of stands can accommodate spools weighing up to 6,000 lb. Open head design enables fast top loading of spindle, while quick adjust mechanism rapidly accommodates different spool diameters. Two forward extensions on head keep spindle safely contained throughout pull. Featuring ergonomic design, location of crank minimizes wrist, hand, and forearm muscle efforts. Read More

Controls & Controllers, Fluid & Gas Flow Equipment, Machinery & Machining Tools, Material Handling & Storage

Solis Accumulator Delivers Stored Material to Converting Line

January 8, 2016

Double E Company utilizes advanced Siemens drive and motion control system to maintain integrated tension and material movement during roll changes, without the need for a separate PLC Double E Company LLC (Bridgewater, Massachusetts) supplies a wide range of solutions for web handling, as well as accessories for the paper, film and foil web converting and packaging industries.  In addition... Read More

Material Handling & Storage

Yale® ESC030AD Three-Wheel Stand Recognized as Plant Engineering Product of the Year Finalist

December 18, 2015

GREENVILLE, N.C. — Yale Materials Handling Corporation announces that its ESC030AD three-wheel stand has been recognized by Plant Engineering as a product of the year finalist. The competition celebrates innovation and recognizes new product designs that help improve productivity in manufacturing operations. Plant Engineering selected the Yale® three-wheel stand as a finalist in the material... Read More

Material Handling & Storage

Pivoting Floor Stand fosters secure, public access to iPads.

July 9, 2015

Constructed of steel with satin powder coat finish, iPad Pivot Floor Stand secures and protects electronic devices subject to risk of damage/theft in public spaces while fostering accessibility and interaction. Internally hidden charging cables ensure device maintains full charge without presenting trip hazard, readily cleanable surface is scratch resistant, and tubular pin lock is pick resistant. Able to be assembled in <5 min, stand accommodates iPad 2/3/4/Air 1/Air 2. Read More

Material Handling & Storage

Equipment Line covers below-the-hook and material handling units.

June 26, 2015

Below-The-Hook equipment include lifting beams, spreader beams, roll lifters, coil lifters, tongs, sheet lifters, and pallet lifters. Material Handling Equipment includes fork truck accessories, material stands, and material baskets. Suited for industrial and construction markets, all products come in standard and fully engineered custom design options. Below-The-Hook lifters are designed and manufactured to ASME B30.20 & BTH-1 standards and Proof-Tested to 125% capacity. Read More

Material Handling & Storage

Floor Stands store and facilitate access to small parts.

June 5, 2015

Available in 9 pre-configured units using Tip Out Bin System, Floor Stands allow Tip Out bins to stack on top of one another to form small parts storage system. Casters can be equipped for mobility, and polystyrene cabinet has clear bin cup to facilitate identification of products within. Read More

Material Handling & Storage, Materials & Material Processing

PTi Announces NPE Show Line: Thin-Gauge 'Dryer-Less' PET/PLA Sheet System

March 17, 2015

Company to Showcase Unique Thin-Gauge Sheet Extrusion Line at NPE 2015 AURORA, Ill. – Processing Technologies International (PTi), a leading global manufacturer of high-performance sheet extrusion machinery, has announced its showcase system at NPE 2015: The International Plastics Showcase, March 23-27 at the Orange County Convention Center in Orlando (Booth W4182). The NPE Line is an... Read More

Material Handling & Storage, Materials & Material Processing

Portable Mixer Stands eliminate manual lifting with tote bins.

March 11, 2015

Fully mobile Sharpe Portable Mixer Stands let operators raise and lower mixers in and out of 200&ndash;400 gal metal and plastic tote bins without manual lifting. Available sizes collectively offer 46&ndash;140 in. height adjustability, and horizontal arm on each clears bin top and reaches inside. Variants include electric ELS Series, powered by 115 Vac motor with worm gear drive, and pneumatic ALS Series. Both include NEMA 4 controls and can be constructed with stainless steel and mild steel. Read More

Machinery & Machining Tools, Material Handling & Storage, Packaging Equipment

Configurable Roll Stand facilitates future expansion.

February 19, 2015

With G-Series® Configurable Model GCH661824, downstream configuration changes are possible for inline thermoforming and roll stock applications. Configurable frame allows other downstream modules to be added without cutting, welding, or machining. Length of module can be adjusted, increasing or decreasing distance between main roll stack and pull roll. Other features include linear bearing system positioning, ratcheting vertical nip height adjustment, and mechanical roll lock-out. Read More

Controls & Controllers, Material Handling & Storage, Materials & Material Processing

Davis-Standard's Global Advantage(TM) at NPE 2015

February 3, 2015

(Pawcatuck, Conn.) - Davis-Standard, LLC will promote a variety of industry-leading extrusion and converting technology at booth W6144 during NPE 2015 in Orlando, Florida. Extrusion solutions geared toward energy and cost efficiency, product versatility and maximum productivity will be on display. Davis-Standard’s exhibit includes a running profile line for producing 3D printing rod, direct... Read More

Material Handling & Storage, Non-Industrial Products

Bicycle Work Stand enables on-the-go repairs and maintenance.

December 31, 2014

Enabling day or night, en route bicycle repair and maintenance, Deluxe Public Work Stand incorporates all necessary tools which are securely attached by retractable braided stainless steel aircraft cable. Product is designed to incorporate manual pump and Wheel Chock, and hose maximizes range without touching ground. With optional Wheel Chock, 2 bikes can be repaired concurrently. Chock can also be used independently and secured next to bike pump to support bike while inflating tires. Read More

Material Handling & Storage

Pipe Stands offer hydraulic adjustment.

December 23, 2014

Available for 4&ndash;20 in. pipe, Hydraulically Adjustable Pipe Stands help align thermoplastic pipe on butt fusion jobsites. Hand-pumped hydraulic lifting gives operator ability to adjust height of stand while pipe is still supported on it. Featuring soft rollers to protect pipe and minimize scratching, stands support up to 2,750 lb. Read More

Chemical Processing & Waste Management, Material Handling & Storage

Cooling Stand/Sieve holds fluidized bath items and captures ash.

December 19, 2014

Cooling Stand and Sieve serves as resting place for hot basket and parts after they have been removed from fluidized bath. Unit also captures and sieves excess clusters of ash that may fall from tooling, allowing finer aluminum oxide sand to fall into catch pan for reuse in fluidized bath. Afterwards, personnel can dispose of clusters of ash and carbon on sieve screen. Read More

Material Handling & Storage, Plant Furnishings & Accessories

Portable Pipe Stand can be carried to where cutting is needed.

December 19, 2014

Equipped with chain vise, PipeBench 170 firmly holds 0.6&ndash;6.7 in. dia pipe and provides proper support during such cutting operations as creating thread or welding. Maximum load capacity is 441 lb, and standard features include worktable and chip tray to catch sawing or threading chips. Weighing 22.5 lb, stand also comes with shoulder bag to facilitate portability. Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

Patented FDO and Tank Stand from Assmann

December 16, 2014

Assmann Corporation of America has recently received patents for its molded in Full Drain Outlet (FDO) assembly (Patent No. US 8,348,090 B2) and modular polyethylene tank stands (Patent No. US 8,814,110 B2). The FDO assembly is for tanks of 2,500 gallons and larger, providing the ability to drain the tank without the need for mechanically installed nozzles and can be utilized where heavy... Read More