Southwire Co.    Carrollton, GA 30119
Apr 09, 2012 Helping electrical contractors install branch circuit wiring, SIMpull WireBARREL(TM) includes NoLube® SIMpull® THHN, available in circuit-sized conductors paralleled in barrel package; MAXIS BarrelTRUCK(TM) hand-truck; and MAXISBarrelTAP(TM) wire-guide. MAXIS BarrelTRUCK hand-truck and MAXIS BarrelTAP pay-off device both have universal wire-guide feature that promotes smooth, consistent guiding of paralleled conductors out of WireBARREL package, essentially replacing wire cart and multiple reels.

Reelcraft Industries, Inc.    Columbia City, IN 46725
Mar 05, 2012 Designed in house and built to customer specifications to fit inside standard truck bed, Jetter Reel Turn-key System includes hydraulic power pack with 8 hp motor, special hose for well cleaning applications, directional control valves, and air pressure manifold, all specified by customer and ready to go out of box.

Larson Electronics, LLC    Kemp, TX 75143
Jan 23, 2012 Used to connect lighting and tools without tangles and cord pileups, EPLRT-50-HR contains 50 ft of 16 AWG, abrasion- and chemical-resistant SOOW cord on slip ring housing that can be extended or rewound as needed in hazardous environments. Class 1 Division 1 explosion proof twist lock plug receptacle, included, provides secure and pull resistant connection, while spring loaded ratchet and 4-roller, adjustable cable guide with ball stop facilitate cord winding/unwinding.

K&H Industries, Inc.    Hamburg, NY 14075
Nov 10, 2011 Featuring all steel construction with yellow powder-coat finish, industrial-grade ReelTuff RTB Series is NEMA 4 rated for indoor/outdoor environments, including wet locations. USA-made units include heavy-duty formed steel mounting base, adjustable ball stop, positive lock ratchet, and 6 ft feeder cord. Pre-wired options include outlet boxes, plugs, connectors, or work lights.

Reelcraft Industries, Inc.    Columbia City, IN 46725
Jul 29, 2011 Featuring carbon steel, fully welded spool and frame construction, Ultimate Duty Jetter Hose Reels hold up to 500 ft of 1½ in. diameter jetter hose. Design gives reels strength of single piece of metal and allows for optimal bearing support. Precise engineering allows for exact alignment without need for adjustment.

Coe Press Equipment Corp.    Sterling Heights, MI 48310
Jul 26, 2011 Developed to serve press lines handling heavy coils in widths from 12-36 in., 10,000# Series can be combined with traveling coil car to provide modular unwinding solution. Unit can be configured to work in pull-off application with power straighteners and rollforming equipment or as motorized pay-off reel with drive mechanism to unwind coil built into machine. Standard features include heavy-duty welded construction, 3-pad mandrel design, and manual hand crank expansion.

Newson Gale, Inc.    Lakewood, NJ 08701
Jun 30, 2011 Housed in powder-coated steel, Model VESM02 provides static ground protection for difficult field applications such as tanker trucks, rail cars, IBCs, and mobile tanks or drums. NEMA 4/IP56-rated unit is fitted with 50 ft of Cen-Stat(TM) Static-Dissipative Hytrel(TM) protected cable with adjustable ball stop, which is held under constant tension by spring/auto-locking device. Main cable is pre-terminated by additional 10 ft of 2-conductor cable to facilitate connection to Earth-Rite grounding system.

Coxreels    Tempe, AZ 85283-4323
Apr 22, 2011 Equipped with stainless steel external full-flow swivel and chemical-resistant Viton® seals, DEF Hose Reels come in SH Series heavy-duty single pedestal models or T Series supreme-duty dual pedestal versions that handle up to 75 ft of ¾ in. hose and up to 50 ft of 1 in. hose ID. Both are outfitted with Super Hub(TM) dual axle support systems to optimize stability and minimize vibration during operation. Standard spring retraction and EZ-Coil® controlled retraction systems are available.

K&H Industries, Inc.    Hamburg, NY 14075
Mar 28, 2011 Constructed of heavy-duty steel with white powder coat finish, ORB Series is rated NEMA 4 for wet or dry locations. Units feature positive-lock ratchet or constant-tension payout, 4-roller cable guide, and ball-stop. Measuring 14 x 12 x 8 in., reels accommodate 10-50 ft of cable and are suited for lift, drag, stretch, or retrieve applications. Outlet boxes, plugs, connectors, and pivot or swivel bases are optional.

Reel Options® By Vandor Corp.    Richmond, IN 47374
Feb 24, 2011 Offering alternative to plywood, 19.75 in. Dead~Bolt(TM) Flange is available in 7, 8, 10, and 12 in. cores sizes with 1.59, 1.75, or 0.063 in. arbor holes. Drive hole is elongated to minimize need for adjusting winding machines. Made from environmentally friendly reprocessed material, flange is available KD or assembled and can be constructed with either paper or plastic cores.

Reelcraft Industries, Inc.    Columbia City, IN 46725
Dec 20, 2010 Featuring balanced brass swivel and inlet, Series CU accommodates applications requiring up to 50 or 100 ft of low pressure air or water hose rated to 300 psi. There are 4 models available for storing and retrieving 3/8 or ½ in. ID hose. Each has maximum temperature rating of 150°F.

Reelcraft Industries, Inc.    Columbia City, IN 46725
Dec 02, 2010 Available for up to 100 ft of 5,000 psi hose, Series CT is powder coated at component level for maximum corrosion resistance. Reels feature balanced brass swivel and brake assembly attached to main shaft, eliminating de-spooling when reel is not in use. Inlet hose connects to swivel through tubular base. With maximum temperature rating of 210°F, reels accommodate hose with 3/8 in. I.D. and .600 in. O.D.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Sep 28, 2010 Available for Lincoln premium copper-coated SuperArc® MIG wire line, Precise-Trak(TM) reel incorporates wire winding technology that provides consistent wire placement and optimal joint tracking for no-tangle payoff. Precise wire placement also decreases weld defects caused by wire wander, while virtually unlimited stacking ability increases floor space. Areas of use include automatic and robotic welding applications.

Cerro Wire & Cable Co., Inc.    Hartselle, AL 35640
Sep 27, 2010 True Sequential Footage(TM) cable reel uses footage mark to document remaining wire, beginning with zero at bottom of reel and ending with finished length at top. This mark allows for identification of re-order point and ultimately controls end-of-reel scrap. Precision is ensured with use of Doppler lasers, and unit's non-contact capabilities allow for zero slip and zero wear.

Coxreels    Tempe, AZ 85283-4323
Sep 17, 2010 Designed to handle up to 50 ft of ¼, 3/8, and ½ in. hose ID, SG Series is suitable for low, medium, and high-pressure uses. Models are available with standard spring retraction and EZ-Coil® controlled retraction systems. Outfitted guide arm and roller assembly are moved to 1 of 6 different positions using standard ½ in. wrench. With 2-bolt mounting pattern, reels can be installed on any vertical flat surface, including tool benches, service vehicles, tool boxes, vehicle lifts, and walls.

Coxreels    Tempe, AZ 85283-4323
Jul 15, 2010 Designed for 1125 Series Hose Reels, Wand Holder is constructed of lightweight aluminum, with black powder coating finish for corrosion resistance. Unit measures 24 in. long and 1.6 in. in diameter, making it suited for storing pressure washing guns and other spraying devices directly on reel. Supplied with rust-inhibiting stainless steel mounting hardware, holder can be mounted on left, right, front, and rear slides of A-frame reel base.

Reelcraft Industries, Inc.    Columbia City, IN 46725
Jul 02, 2010 Able to accommodate longer lengths of twin hydraulic hose, mobile base 9000 Series features corrosion-resistant, industrial steel construction with individually powder coated parts. Reels exhibit rigidity, stability, and strength due to heavy gauge base design as well as drive springs made from scaleless blue spring steel. While reels may be mounted to floor, ceiling, or wall, they are specifically engineered for truck mount applications.

K&H Industries, Inc.    Hamburg, NY 14075
Jun 22, 2010 Rated NEMA 4 for wet or dry locations, ORB Series is available in custom configurations by cord type, length, and pre-wired options. Units feature heavy-duty steel construction, 4-roller cable guide, and positive-lock ratchet or constant-tension payout. Available with SOOW or SJOW power cable, reels come in 15 A model with 16 AWG cord, 15 A model with 14 AWG cord, or 20 A model with 12 AWG cord.

Coxreels    Tempe, AZ 85283-4323
May 21, 2010 Supporting hose IDs from ¼-½ in. and pressures from 300-5,000 psi, S Safety Series Side Mount spring driven hose reels feature 2-bolt mounting pattern that facilitates installation and detachment for multiple workstation applications. Steel arm mounts flat to any surface, and 360° payout enables use from any direction. Along with auto rewind and cartridge-style spring motor, features include heavy-duty steel construction, multi-position locking ratchet, and brass NPT Swivel.

Coxreels    Tempe, AZ 85283-4323
May 19, 2010 Suited for off-road applications in abusive environments, T Series spring driven hose reels feature chassis supported by dual pedestal-style arms that span from roller guide bracket down to mounting base. Triple support points to center shaft are complimented by Super Hub(TM) support system, and 6 models feature 75 ft of ¾ in. hose or 50 ft of 1 in. hose. Additionally, reels come with stainless steel rollers and max pressure rating is 5,000 psi.