Interlake Material Handling, Inc.
Naperville, IL 60563
Mar 23, 2006 Engineered to meet RMI 2002, AISI, and AISC standards, Interlock(TM) bolted upright system uses zinc-plated Grade 5 bolts with limited thread engagement design that prevents over tightening of matching serrated flange locknuts to create positive, secure connection. Pre-galvanized steel construction provides protection against corrosion and rust, and recessed channel in steel rack uprights eliminates potential interaction of hardware with product, pallets, and operations personnel.

Rapid Rack Industries, Inc.
City of Industry, CA 91746
Mar 21, 2006 Featuring large, adjustable Gorilla Wrap(TM) laminate shelves, Z-Beam Storage Rack can accommodate bulky items. It has concealed mounting keyholes and powder coat paint that allows for clean, rust-free look. Rack requires no nuts or bolts for assembly and is suitable for garage, basement, and office storage.

Eagle MHC
Clayton, DE 19938
Feb 03, 2006 Featuring non-corrosive, stainless steel and anodized aluminum roller track, High-Density Floor-Trak(TM) System enables material managers to store supplies, parts, and other items in space-efficient manner. System accommodates most wire shelving products with post heights up to 86 in., or high-density polymer LIFESTOR® shelf sections. Industrial-grade bearings let loaded shelves glide over tracks, while shock-absorbing end-stops ensure shelving is securely braked.

Branson Ultrasonics Corp.
Danbury, CT 06813 1961
Feb 02, 2006 Placed at bottom of ½-5½ gal ultrasonic tank, Support Racks provide stable flat surface for parts, fixtures, or containers. Open design with integral rubberized feet will not inhibit chemistry circulation or ultrasonic energy. Made of stainless steel for chemical compatibility, racks are electro-welded with electro-polished finish. Used on countertop after cleaning or processing, racks can also hold components off table to facilitate drying.

Eagle MHC
Clayton, DE 19938
Jan 19, 2006 Available in stationary and mobile models, chrome finished garment racks feature QuadTruss® structural wire design and construction allows vertical air flow. Racks provide top shelf storage of hats and flat items, bottom shelf for shoes, and optional solid shelf that can be positioned underneath to catch water or moisture. Racks are offered in 48, 60, and 72 in., with hanger slots, hooks, or hanger tubes.

Lista International Corp.
Holliston, MA 01746
Nov 21, 2005 Nexus(TM) Flow Rack uses gravity to deliver parts, components, and cartons for picking, kitting, or assembly in material handling applications. It accept any Nexus System accessory, including shelves, lights, power, and articulating arms. By adding worksurface and casters, Flow Rack becomes mobile workstation. Product measures 86¼ in. high x 48 in. deep and is available in 30, 36, 42, 48, and 60 in. widths.

Hewlett Packard
Houston, TX 77269-2000
Oct 05, 2005 Providing 1,500 lb static load capacity, Model HP 5642 measures 1,000 mm deep and 19 in. between 2 front RETMA rails. Perforated rear door is lockable, preventing intrusion to cable and power supply area. Side panels, necessary for proper airflow, are included. Leveling feet are standard, while stabilizing feet, baying kit, and front door are optional.

IBM (Corporate Headquarters)
Armonk, NY 10504-1783
Sep 30, 2005 ThinkPad® Adjustable Notebook Stand elevates notebook PC to choice of 4 heights and features adjustment angles of 0°, 15°, 30°, and 45°. Stand supports ThinkPad Advanced Mini Dock and ThinkPad Essential Port Replicator, and also incorporates support ledge so notebook may be used without them as well. With stand, users can align ThinkPad display with external ThinkVision monitor for multi-monitoring.

Jarke, A Division Of Leggett & Platt
Prospect Heights, IL 60070 1806
Sep 28, 2005 Facilitating product identification, freestanding Cantilever Storage Racks accommodate aluminum sheets, bars, conduit, drywall, electrical harnesses, and fabricated parts as well as lumber, masonite board, pipe, plastics, plywood, rods, tubing, shafts, and wood crates. Units are shipped knocked down and can be assembled without special tools.

Quixxsmart Structures Inc.
Peabody, MA 01960
Aug 23, 2005 Suited for unmonitored plant floors, Modular Racking Systems feature metal sides and retractable front and rear shutters, creating totally enclosed structure for light security. Manually operated rolling shutter with key lock further facilitates security of small part inventory. Made of 16-gauge steel tubing with corrosion-resistant zinc coating, systems include height adjustable shelves and total-locking casters with nylon rollers for mobility.

Ridg-U-Rak, Inc.
North East, PA 16428
Aug 23, 2005 Extendo-Max100V has roll-out shelves that employ V roller shelf-guide mechanism that carries full rated capacity of shelves at 100% extension. Unit is offered in 6 heights from 60¼â€“120¼ in. and houses up to 4 independent shelves, each adjustable on 2 in. centers. Suited for storage and retrieval of dies, molds, and industrial components, shelves are available in 2,000 or 3,000 lb capacities and come in 4 sizes from 36–48 in. wide and 36–48 in. deep.

Emerson Electric Co.
St. Louis, MO 63136 8506
Jul 25, 2005 Liebert Foundation EX allows IT and network managers to adapt equipment racks to manage growing cabling requirements and accommodate more equipment. Multi-function Expansion and Cable Management Channels add space and cable management capabilities. Offered in various depths, channels can be added to front and rear of rack and include cutouts to accommodate broad equipment mounting. Power and cooling are integrated and distributed as heat and power densities grow.

Phihong USA
Fremont, CA 94539
Jul 19, 2005 With quick disconnect for 3 individual loads, 1,500 W, 1U Model PSM1554 accepts three PSM500 500 W power supplies. Unit is available with 48 V main and up to 30 A, and 12 V standby up to 4.5 A. Operating from input voltage of 90–264 Vac with active power factor correction, rack is hotplug and n+1 configurable for scalable and redundant applications. Each output is individually protected against overloads that cause overheating of wiring from excessive current.

Durham Manufacturing Company, The
Durham, CT 06422-2108
Jul 15, 2005 Offered in 3 models, Rotabin® systems consist of circular revolving steel shelves, dividable into triangular bins, mounted in stacks on vertical stem or axle. Space-saving solutions facilitate viewing and picking of parts from one spot. Series 1300, 1200, and 1110 offer up to eight 34 in. dia shelves, ten 28 in. dia shelves, and ten 17 in. dia shelves, respectively. Series 1300 has 5 permanent compartments per shelf, and each shelf will hold up to 500 lb.

Hewlett Packard
Houston, TX 77269-2000
Jun 22, 2005 Offered in both low and high voltage configurations, Infrastructure Rack comprises HP 10000 Series rack 42U, power distribution units, switches, keyboard, monitor, and other products required for deploying racks in datacenter. All components are pre-installed.

Ortronics, Inc.
New London, CT 06320
May 27, 2005 Featuring steel knock-down design that can be assembled onsite, Mighty Mo 6 is compliant to Telcordia GR-63-CORE Zone 4 standards, with load rating of 510 lb. Unit is 7 ft high with 10.5 or 16.25 in. channel depth and full 45 rack units of mounting space. Suited for high-density cabling system applications, rack features vertical management cage with individual 1-rack unit fingers and double-hinged door that can open to left or right.

Rousseau Metal
St. Jean-Port-Joli, QC G0R 3G0  Canada
May 10, 2005 Made from PVC, NC Tool Rack protects tools from blows and can be perforated for Taper, Straight, Sandvik Capto, HSK, KM, and VDI tools. It is also available blank, allowing users to personalize unit for specific needs. Rack includes Tool Identification zone for tool retrieval and ergonomic handles to facilitate carrying.

Bud Industries, Inc.
Willoughby, OH 44094
Apr 21, 2005 Installable in less than 5 min, heavy-duty Tool-Less Shelf is constructed of 16-gauge steel with 12-gauge steel mounting brackets and has smooth black powdercoat finish. Panel width is 19.00 in., and shelf dimensions are 17.68 in. wide x 23.00 in. deep. Ventilated version and custom sizes are available. Able to support up to 150 lb of equipment, shelf suits cabinet or rack assemblies that require installation of non-rack-mountable equipment.

Datum Filing Systems, Inc
Emigsville, PA 17318
Apr 12, 2005 Model BFC-2 with TambourDoor enables storage and transportation of letter, legal, X-ray, and binder media. Unit offers locking pull-down tambour door to secure files. Two angled letter-sized shelves prevent files from falling out during transport, and provide 64 lineal filing inches of letter-sized folders. Four adjustable file dividers are also included.

Bosch Rexroth Corp., Linear Motion & Assembly Technologies Div.
Buchanan, MI 49107-1801
Apr 07, 2005 Using individual components, modular Flow Rack System can be adapted to specific needs. X-lean roller section consists of steel profile and rollers, with or without roller flange. Using rail holders, roller section is suspended securely on tubular aluminum cross tie. Lean roller section uses colored rollers, making inventory information clearly visible in entire process. Smooth slide rail is available for heavy containers or containers with uneven bottom surfaces.