PVRacking LLC    Churchville, PA 18966-1117
Jun 29, 2011 Constructed using aluminum, galvanized steel, and stainless steel hardware, PV Racking System allows solar modules to slide in place, making solar installation virtually clamp-free for both ground and roof systems. Modules are secured by continuous edge with capping that creates clean and finished look.

My Ladder Hand, LLC    Owensboro, KY 42303
Jun 22, 2011 Installed by hooking onto ladder rungs, My Ladder Hand provides 11 x 14 in. shelf on which to hold tools, materials, and supplies. Safety is increased by permitting OSHA-recommended 3-point-of-contact climbing and eliminating need to hold and balance working tools. Shelf also helps prevent dropped tools and eliminates need for multiple trips up/down ladder to retrieve tools. Ladder compatibility includes commercial extension ladders, multi-purpose ladders, small step ladders, and more.

Wittenstein, Inc. (formerly Alpha Gear Drives, Inc.)    Bartlett, IL 60103
Jun 22, 2011 Part of High Performance Linear System, Performance Class Racks partner with gearbox/actuator and pinion for optimal efficiency. Performance version features standard hole pattern, while High Performance model has hole pattern optimized for high feeding forces. Providing strength at tooth root of racks, hardening process enables racks to resist high stresses.

Bud Industries, Inc.    Willoughby, OH 44094
Jun 20, 2011 Available with 4 casters, portable BudRack Professional Series features ventilated tempered glass front door, solid steel locking rear door, and removable locking sides for security and quick access. It handles 19 in. rack-mount component equipment such as computer servers, monitors, KVMs, networking, and test instruments. Rack has 2 pairs of fully-adjustable 14 ga panel mounting rails, and comes complete with either two 23 in. or four 31 in. depth fans to expel air from cabinet.

Stakrak Ltd    West Sussex RH11 9SH  United Kingdom
May 17, 2011 Light-duty cantilever storage racking is available in 3 heights and 2 depths in both single- and double-sided configurations. Each bay is supplied with 3 arms/frame, but user can add or deduct levels based on requirements, with one base/bay along with necessary bracing and fixing plates. Lightweight frame with durable epoxy finish in blue RAL5010 offers storage capacities of up to 1,750 kg, while arms, which can be adjusted every 70 mm, carry loads up to 185 kg.

McElroy Manufacturing, Inc.    Tulsa, OK 74158
May 13, 2011 Comprised of pipe racks and powered pipe stands that hold enough lengths of pipe for day's worth of work, MegaMc® PolyHorse(TM) is suited for jobsites using 20-48 in. dia polyethylene pipe. Because pipe is stored in one location and is ready for use, system allows heavy machinery to work other places on site. Single operator can maneuver pipe onto pipe stands and into pipe fusion machine with use of remote control. Max capacity is 70,000 lb, with max pipe length weight of 10,500 lb.

Creform Corp.    Greer, SC 29652-0830
Apr 25, 2011 Flow rack has ergonomic design and drop-in low-friction roller tracks suited for use with carboard boxes or totes with soft bottoms or open cell designs. Featuring 750 lb capacity and 42 x 78 in. footprint, product includes six 4 in. dia urethane casters, and aluminum roller tracks available in 6, 9, 12, and 15 in. widths, with roller spacing at 1, 2, or 3 in. centers and lengths up to 12 ft. Boxes and totes are angled in supply lanes to optimize viewing and picking.

Proper Storage Systems, Inc.    Seguin, TX 78155
Mar 01, 2011 With Full Extension Pneumatic Roll-Out Shelving Racks, users can store and access heavy tooling and materials. Units offer shelf widths from 36-66 in. and shelf depths of 36 or 48 in. in 2-, 3-, and 4-shelf models. Automatic safety interlock locks in all other shelves when one shelf is extended. Shipped fully assembled, racks include all necessary anchors.

Stakrak Ltd    West Sussex RH11 9SH  United Kingdom
Feb 28, 2011 Used in lean, JIT (just-in-time) manufacturing and concession stockholding environments, Kanban side storage racking system facilitates storage of components at point-of-use on production line. It can be adapted and modified to fit requirements and is suited for smaller components such as fasteners and fixings. Options include all-metal shelves with plastic bins, or racks with particle board decks and plastic bins. Dual-bin arrangement simplifies stock rotation and replacement.

Lyon Workspace Products    Aurora, IL 60507
Jan 10, 2011 Suited for military, domestic defense, and police professionals, Model MDC meets requirements of paragraph 4 of Small Arms Storage Rack Certification Document; part of AR 190-11 for physical security of arms, ammunition, and explosives. Cabinet features integrated locking system at both vertical drawer ends, as well as rubber-coated gun partitions and foam inserts that protect and secure weapons within each drawer. All drawers feature bottom foam liner for weapon surface protection.

GAO FiberOptics Inc.    Toronto   Canada
Dec 14, 2010 Able to link transparently with backbone equipment in LAN workgroup environments, 14/16 Port Converter Integrated Rack accommodates slide-in modules of various types of media converters at central location for multiple segment cross connections. Unit operates at distances up to 100 m and provides intelligent management and monitoring of critical connections. Featuring mix of 10 Mbps, 100 Mbps, and Gigabit media converter cards, device conforms to IEEE802.3u 10/100Base-TX and 100Base-FX standards.

UltraTech International, Inc.    Mentor, OH 44060
Nov 26, 2010 Available in 3, 4, 5, and 6-drum configurations, Ultra-InLine SpillDecks feature narrow 26 in. depth that allows drums to be stored in single row along facility walls. Units are made from 100% polyethylene, offering resistance to broad range of chemicals, including acids, solvents, and oils. Featuring low 5.75 in. profile for safe drum loading, all models meet EPA and Uniform Fire Code Spill Containment Regulations.

UltraTech International, Inc.    Mentor, OH 44060
Nov 16, 2010 Offered in 8-, 12-, 16-, and 20-drum models, Ultra-Hard Top Plus units feature all-polyethylene construction and multiple 4-drum compartments for collection/storage operations. Internal walls and separate sumps allow material segregation, and each lockable compartment features 2-way entry. Inner headspace allows drum pumps and conical funnels to be left in place when units are closed, and low-profile containment pallet positions drum-top funnels at safe level to pour hazardous wastes.

Tripp Lite    Chicago, IL 60609
Oct 29, 2010 Able to accommodate range of applications, SRWO8U22 comes with all parts necessary for assembly and installation as 8U, 14U, or 22U wall-mount open frame rack. Flexible assembly options provide margin for growth, and open frame design facilitates access to equipment and cabling. Product is suitable for rackmount equipment installations in space-critical environments.

Hewlett Packard    Houston, TX 77269-2000
Oct 14, 2010 Accommodating server, storage, and switching products, HP 10000 G2 Series 1200mm Deep Rack consists of 19 in. rack in 42U and 47U heights with fully welded, 8-layer rolled steel frame that supports 2,500 lb max (dynamic) and 3,000 lb max (static). Design grants full cable access and features 100 in.² of additional perforations for optimal airflow. While front and rear door handles and locks promote security, side panels facilitate manageability and mounting.

Tripp Lite    Chicago, IL 60609
Oct 14, 2010 Combining heavy-duty open frame rack with wall-mount bracket, Model SRWO12US is designed for restricted-space applications in wiring closets, remote sites, and satellite offices. Hinged bracket allows frame to swing out from wall for access to equipment and cabling, while adjustable pivot locks frame in open or closed position and supports 3 frame depths. Constructed from heavy-duty steel, rack provides 150 lb load capacity.

Atlanta Drive Systems    Wall Township, NJ 07719
Oct 08, 2010 Available in straight and helical versions, Strong Line of Gear Racks utilize carburized case-hardening process to optimize strength of rack, including tooth flanks and root, mounting holes, and back and side surfaces. This allows back surface to be used with cam follower roller bearings for guiding axis. Racks are precision ground on teeth and all sides to achieve accurate pitch deviation and parallelism. With max holding force, mounting holes insure rack remains stationary under high forces.

Super Micro Computer, Inc.    San Jose, CA 95131
Sep 16, 2010 Equipped to support high-density server, storage, and blade systems, 42U SuperRack(TM) features fully welded construction that offers static load capacity of 5,000 lb for data center, high-performance computing (HPC), and server farm applications. Clean cable routing promotes optimal airflow, while also facilitating installation and providing obstruction-free rear access for hot-swap devices. Available flexible accessory options include front, rear, and side expansion units.

Montel Inc.    Montmagny, QC G5V3S5  Canada
Aug 20, 2010 Designed to provide storage and filing solution for modern workspace environments, SafeAisle(TM) High-Density Powered Mobile Storage System uses LED Guard Technology to detect entire floor surface of aisle for safety. As soon as, and as long as, user or object is in aisle, built-in total detection safeguard prevents movement of any carriage. System includes visual backlit indicators, audio feedback, adjustable IR distance measuring sensors, and PDA-friendly WiFi remote control.

Video Mount Products    Stevensville, MD 21666
Aug 16, 2010 Constructed of steel and aluminum with black static-resistant powder coat finish, Model ER-W24 features 24 in. rail height, 13 rack spaces, and 19 in. usable depth. Easy hang design enables installer to mount wall plate, fill equipment rack, and attach populated rack to wall. Featuring standard 10-32 threading, EIA compliant rack opens from left or right side.