Eagle Foodservice, An Eagle Group Co.
Clayton, DE 19938
Sep 30, 2002 LIFESTORâ„¢ Modular Storage Shelving, designed for materials management applications where sterile requirements are important, features high-density polymer sections combined with Type 304 stainless steel posts and rails. Adjustable and removable intermediate shelf sections are offered in solid or louvered styles. Shelf lengths range from 24 to 60 in., with heights of 63 and 74 in. Standard shelf widths are 18 and 23 in.

Advance Storage Products Div., JCM Industries Inc.
Huntington Beach, CA 92649
Sep 20, 2002 Full support, level-cart pushback system can store pallets that have been damaged, pallets with no bottom boards, 9-legged pallets, and pallets ranging in size from 30 to 72 in. It is available in 4-strut, wire-deck, and diamond-plate models.

Trion Industries, Inc.
Wilkes Barre, PA 18702 6997
Sep 19, 2002 Pull-out shelving offers side bracket design, depth of 15 ¾ or 19 in., and length of 3 or 4 ft. Compatible with shelf edge label strip systems and Shelf Worksâ„¢ dividers and auto feed pushers, pull-out shelves maximize facings by reducing excess vertical space between tiers. It re-stocks by pulling out entire shelf for top access. Tight vertical spacing helps prevent sweeping.

Trion Industries, Inc.
Wilkes Barre, PA 18702 6997
Sep 06, 2002 EWT Shelf Worksâ„¢ mounts via pushbutton/front rail system or ordinary wire ties, and also works as freestanding unit. It adjusts from 5 to 12 in. wide to accommodate any shape package, and has powder-coated, galvanized wire and Celcon plastic adaptors. Open wire design sheds dust and dirt and promotes air circulation, making it suitable for cooler and freezer applications. Clear plastic front rail is available as alternative to wire front product stops.

Steel King Industries, Inc.
Stevens Point, WI 54481
Sep 04, 2002 StacKing Rack has tubular steel base and columns that allow user to store product in otherwise wasted space. Four removable corner posts allow safe stacking up to 6 levels high. Unit is offered with or without wood board decks, in 3 base sizes and with 2 post heights. StacKing rack is engineered to protect loads during handling, stacking, and shipping.

Thales Computers Corp.
Raleigh, NC 27610
Aug 19, 2002 RA2064x 19 in. Airborne VME Rack is convection-cooled with operating temperature of -40°F to +169°F. Front panel has output voltage indicators (+5V, +12V, -12V, +3.3V), on-off switch, and access to 2 internal SCSI 3 1/2 in. disk drives and Flash solid-state drive. Rear panel includes MIL-C-38999 power connector and provides access to 4-slot VME64x backplane. Rack meets RTCA/DO-160D standard for avionics equipment and can be used in pressurized cabin.

Bud Industries, Inc.
Willoughby, OH 44094
Aug 08, 2002 Model DC-8010 rack has panel mounting rail design that allows users to choose desired panel width. Four panel mounting rails come with cabinet. All-welded steel frame cabinets come in panel height of 78.75 in. with overall height of 84 in. Cabinet width is 27 in. and overall depth is 30.75 in. Neutral sand texture cabinet weighs 256 lbs and has 1,200 lb equipment load capacity. Cooling is accomplished via louvered front and rear doors and ventilated top.

SpaceRak, A Div. of EWCO
Marysville, MI 48040
Jul 18, 2002 Selective pallet rack system provides years of continuous service in rugged environments. Upright frames are 50,000 psi steel with one-piece welded construction. Beams are of continuously welded tubular construction, each with 3 or more heavy-duty load bearing studs. They are designed to snap and lock securely to frame in one step. Replaceable spring safety locks prevent accidental beam dislodgement.

Proper Storage Systems, Inc.
Seguin, TX 78155
Jul 16, 2002 Monorail attached to top of unit reduces risk of back injuries caused by maneuvering heavy items such as engines, molds, dies, fixtures, and spare parts. Units require less floor space and eliminate 2 or 3 steps in material handling since operator can roll out shelf, pick up needed item with overhead hoist, and move it directly to work area.

MegaStar Systems
Marietta, OH 45750
Jul 15, 2002 ELF Electric Lateral File System consists of vertically arranged rotating carriers controlled by electronic keypad or software. Carrier configurations include multi-purpose divided carriers for letter and legal file folders, hanging frame carriers with roll-out drawers for suspended files, and roll out drawers for letter and legal folders with top tab index. Security carrier is available with lockable compartments.

SpaceRak, A Div. of EWCO
Marysville, MI 48040
Jul 08, 2002 Drive In/Drive Thru rack allows vehicles to enter storage area for pallet placement in front to back arrangement. Rack sections can also be back to back for vehicle entry from aisle on either side of storage area. Vehicles can enter rack bay, place pallets on supporting rails, and exit bay. They enter bay from opposite side to remove loads. Pallet rack system allows for floor to ceiling storage configurations while reducing number of conventional traffic aisles.

Morgan Marshall Industries, Inc.
Chicago Heights, IL 60411 3798
Jul 01, 2002 Stack Rack minimizes amount of floor space needed for high-volume storage by utilizing vertical space. It can be stacked up to 5 layers high with capacity up to 4,000 lbs. Stack Rack allows for high-volume movement of materials, is easily assembled, and comes in variety of sizes.

Hoffman
Anoka, MN 55303 7504
Jun 05, 2002 EIA 310-D industry standard, 19 in. wall-mount racks and cabinets include 5 models in 18 different configurations. Hinged wall-mount panels, available in 1, 2, 4, 6, or 8 rack units accommodate partial network installations or remote nodes, while fixed wall-mount racks in 12, 20, 25, and 32 rack units are suitable for banks of small networking equipment. Racks and cabinets are constructed of 12 or 16 gauge steel and finished with black low gloss powder paint.

SpaceRak, A Div. of EWCO
Marysville, MI 48040
Jun 04, 2002 Raptor-Rak has 3 in. wide upright columns that withstand heavy-volume forklift traffic. Fully welded tubular beams connect via 3 or 4 stud end connectors, with spring-steel, replaceable safety locks. Frame posts come in 14 through 11 gauge, 50,000 psi continuously welded steel. Hot-rolled steel makes up horizontal and diagonal angle bracing, which is MIG-welded to posts. Raptor-Rak uprights provide beam height adjustability on 2 in. centers.

SpaceRak, A Div. of EWCO
Marysville, MI 48040
May 30, 2002 PushBack Rack System is based on the use of overriding, wheeled pallet carts that travel on slightly canted rails, allowing carts to roll forward to front of bay. System configurations range from 2 to 6 pallet positions deep, with variable bay widths to accommodate single-wide or double-wide pallet rows. Upright frame is 1-piece construction, made from 50,000 psi steel, with horizontal and diagonal braces MIG-welded to posts.

Equipto
Dallas, TX 75001
May 28, 2002 Rivet-Gripâ„¢ freestanding heavy-duty rack is stocked 7 ft high, with depths from 12 to 48 in. and widths from 36 to 96 in. For long rows, it uses common uprights to reduce cost and enhance rigidity. Capacities range from 350 to 1,600 lb per shelf, which are available with particleboard or wire inserts.

Steel King Industries, Inc.
Stevens Point, WI 54481
May 23, 2002 Single-Leg Over-Dock Storage Racks feature upright frame with offset leg, and one single back column up to height that will clear door. Ceiling Supported design must be worked into building plans to ensure structural stability. It has no lower legs to interfere with traffic. Racks include structural channel load beams with bolted connections. Two bolt-in pallet supports are installed under each pallet position.

Proper Storage Systems, Inc.
Seguin, TX 78155
May 23, 2002 Nitrogen Purge Cabinet features sealed sides, back, and doors that can be made of plexiglass when visual control is required. Roll-out shelves provide easy access to all items being stored. Shelf sizes range up to 10 ft wide and 5 ft deep. Units can also be made completely out of stainless steel.

SpaceRak, A Div. of EWCO
Marysville, MI 48040
May 22, 2002 Cant-I-Beam System with I-Beam construction is designed for medium- to heavy-duty load service. Both columns and arms are made of structural I-beam sections, with arms fastened to columns by 4 bolts. Arms are adjustable on 4 in. centers. Base assemblies also bolt to column, with 1 required for single-side storage; 2 for double-side storage. Load capacities range up to 109,000 lbs per column and up to 14,000 lbs per arm.

Snap-on Industrial
Kenosha, WI 53141 1410
May 16, 2002 Maximum Security tool storage system comes with Remote Patrol electronic security system, which provides keyless entry and motion detector. System features Lock n' Roll drawers with non-slip liners, tubular locking system, and non-directional rubber mat. Top chest has 16,101 cubic in. capacity and measures 21 x 54 1/4 x 24 in. Roll cab has 2 sliding parts trays and one tote tray. It can handle up to 3,600 lbs, and has 22,138 cubic in. of space.