L & J Technologies, Inc.    Hillside, IL 60162
May 11, 2012 Model 99060 Duracator is visual pallet lift indication device for conservation vents that allows plant personnel to visually detect percentage of pallet lift that has occurred. It fastend to top of conservation vent pressure cover or hood and features memory and following modes. Memory mode displays maximum percentage of pallet lift until it is reset, while following mode indicator tracks position of pallet and returns to zero when it closes. It is available in 2-6 in. and 8-12 in. sizes.

Interstate Products, Inc.    Sarasota, FL 34233
Jul 21, 2011 Manufactured to fit seamlessly into warehouse racking systems without impeding on adjoining rack storage areas, Ultra-Rack Sump accommodates up to four 55-gallon drums positioned on standard 40 x 48 or 48 x 48 in. wooden shipping pallets. Sump is molded from polyethylene, which is chemical resistant and will not rust or corrode. Designed to prevent hazardous liquids from leaking onto floors and equipment, 66-gallon rack sump complies with EPA, SPCC, and UFC spill containment regulations.

Ramsey Winch, Inc.    Tulsa, OK 74116
Jul 18, 2011 Designed to fit in back of standard Work Ready truck body, Mobile Lube Skid is available in various configurations with corrosion-resistant aluminum tanks that provide 240-gal capacity. System uses air piston pump for oil and grease and air diaphragm pump for antifreeze. Each hose reel contains 50 ft of hose and has metered dispenser. For portability, skid includes 4 pockets on front side and 4 lifting lugs for stable lift.

Polymer Solutions International    Medford, NJ 08055
Jul 01, 2011 Formed without crevices and cavities capable of harboring bacteria, mold, and other contaminants, ProStack® One-Piece Hygienic Pallet has see-through, open-grid top deck; smooth finish; and flow-through design that facilitate sanitization and inspections. Product is edge-rackable up to 2,200 lb and measures 40 x 48 x 6.25 in. Available in full perimeter picture frame or 3-stringer models, pallet is rated for 30,000 lb static or 5,000 lb dynamic loads and weighs 45-48 lb.

Airfloat Systems    Decatur, IL 62526
Dec 10, 2010 Featuring one-piece frame with no welds to fail, Cast Aluminum Air Skid allows precise, omnidirectional movement and positioning of heavy loads of machinery. Air bearings create continuous flowing film of air between flexible diaphragm and floor surface, making it possible to move 1,000 lb load with 1 lb of force. With slideout, tray-mounted design, air bearing can be pulled out from side, without removing load or turning skid over. Tapped mounting holes provide several mounting options.

UltraTech International, Inc.    Mentor, OH 44060
Nov 26, 2010 Available in 3, 4, 5, and 6-drum configurations, Ultra-InLine SpillDecks feature narrow 26 in. depth that allows drums to be stored in single row along facility walls. Units are made from 100% polyethylene, offering resistance to broad range of chemicals, including acids, solvents, and oils. Featuring low 5.75 in. profile for safe drum loading, all models meet EPA and Uniform Fire Code Spill Containment Regulations.

LOMOLD Group    Southern Paarl 7624 Western Cape   South Africa
Nov 01, 2010 Multi-piece reusable composite pallet system provides ability to separate and rejoin bottom and top decks. Top deck can be used as standalone pallet for one-way trips and supports load of up to 4,400 lb. Stackable up to 4 high, pallets hold up to 10 tons combined static load with no deflection. System deck is extendable from 48 x 40 in. to 52 x 48 in. using removable jacket extension, and product has open design to optimize airflow in temperatures from -22 to +113°F.

UltraTech International, Inc.    Mentor, OH 44060
Jul 27, 2010 Featuring 100% polyethylene construction, 10 in. high Ultra-P4 spill pallet has 66 gal sump that captures leaks and spills from steel or poly drums. Pallet is compatible with broad range of chemicals including acids and corrosives, and nestable design allows multiple pallets to be shipped/stored in minimal amount of space. Compliant with SPCC, EPA, and Uniform Fire Code Containment Pallet Regulations, unit is 2-way forkliftable for easy positioning and relocation.

ALX Pallet Systems    Bingham Farms, MI 48025
Aug 20, 2009 Weighing only 47 lb, closed loop or semi-closed loop C5 pallet measures 48 x 40 in., and performs with automated systems and in extreme temperatures. Robotically assembled for precision and strength, pallet offers long life of over 15 yr. Pallet is fully compliant with UL, FM, GreenPeace, and US EPA standards, and is 100% recyclable and sustainable.

Specialty Equipment    Houston, TX 77055
Jul 08, 2009 Designed to receive and discharge pallets, transfer cars are constructed with welded structural steel and built in variety of sizes and capacities for 1,000-10,000 lb payloads. Depending on application, surface conveyors can be powered rollers, wire mesh belt, or multi-strand chain conveyors. Optional features include personnel safety bumpers, festoon power supply, V-grooved wheels, and urethane wheels.

Worthington Steelpac    York, PA 17402
May 12, 2009 Made of flame-resistant galvanized steel, Steelpac Distribution Pallet is 100% cleanroom compatible and meets Grocery Manufacturers Association capacity and compatibility standards. Pallet is washable, does not attract or harbor insects, and works with automated palletizers since it will not crack or splinter. Measuring 48 x 40 x 5.5 in., pallet has 4-way fork lift and pallet jack access. It provides more than 3,500 lb of unsupported racking capacity and 40,000 lb of static load.

TMF Corporation    Havertown, PA 19083
Mar 05, 2009 Made from high-density polyethylene structural foam that provides impact absorption, PROTECH® 40 x 48 in. Pallets will not splinter, rot, rust, or crease. HDPE construction also resists mold, bacteria, and insect infestation. Featuring one-piece molded design, hygienic units can be cleaned and sanitized between uses, minimizing drying time and potential for trapped water and cross-contamination. Pallets allow true 4-way forklift and pallet jack entry.

New Pig Corporation    Tipton, PA 16684 0304
Feb 26, 2008 PIG® Single Drum Pallet Roll Top Hardcover provides protected storage and non-hazardous liquid containment for frequently accessed drum. Low-density polyethylene construction with UV inhibitor makes unit suitable for both indoor/outdoor use. Weather-tight roll top cover enables drum storage with pumps and funnels in place. Measuring 12 in. high, bottom poly pallet is easy to load/unload, and can hold up to 61 gal of leaks, drips, and spills from single drum.

John Deere    Research Triangle Park, NC 27709
Nov 09, 2007 With unified design suited for tight spaces, models 313 and 315 deliver 360° visibility as well as respective rated operating capacities of 1,300 and 1,500 lb. Standard machine width is 59 in. with 10 x 16.5 in. tires and reducible to 56 in. with 7 x 15 in. tires. Both models employ adjustment-free, heavy-duty drive chains; radial lift boom with 4-5 ft range; and integral, in-seat boom lock. Both machines are powered by PowerTech(TM) 4024T 4-cylinder, 2.4 L engine rated at 2,400 rpm.

Universal Package Systems, LLC    Dale, IN 47523
Sep 20, 2007 Returnable packaging solution, Step-Pak(TM), has ergonomic foot locking/unlocking system on deck of pallet. With 2 mechanisms placed on opposite sides, ABS latches lock/unlock system components without requiring operators to bend over. Each component locks firmly together - set up or knocked down - to account for pallet, sleeve, and lid at all times. Solution knocks down to 12.5 in. and is available with up to 1,000 x 1,200 mm footprint, 36 in. sleeve height, and 42 in. total assembled height.

Schunk    Morrisville, NC 27560
Jul 13, 2007 Unilock Quick Change Pallet System provides repeatable workholding fixtures set-ups for production run machining and grinding operations. Unit consists of stationary modules directly installed on machine worktables and tombstones. Modules are mountable on horizontal, angled, and vertical plates. System features 0.005 mm repeatability, high clamping forces of up to 25,000 lb-ft and 0.2 sec air-actuated locking mechanism.

New Pig Corporation    Tipton, PA 16684 0304
Jun 08, 2007 Designed for compliant storage of multiple IBC units, expandable PIG® Multi-IBC Modular Spill Pallet system features flow-through connections that let individual components share sump capacity. Heavy-duty pallet sections support up to 9,000 lb UDL and have profile height of 8.75 in. to facilitate loading. Constructed of 100% polyethylene, system accommodates all 275 gal IBC units. Additional pallet sections and expansion tanks can be connected to system for increased sump capacity.

AeroGo, Inc.    Seattle, WA 98188 3909
Dec 11, 2006 Suited for Lean Manufacturing, Aero-Pallet System(TM) can transport and position loads from 1-14 tons on 0.005 in. cushion of air. Pallet can float production line assemblies or components and does not require any permanent in-floor fixtures, enabling travel paths to be changed as frequently as needed. Connected to standard compressed shop air, system provides multidirectional horizontal maneuverability and utilizes 4 or more Aero-Casters beneath its deck.

AeroGo, Inc.    Seattle, WA 98188 3909
Oct 19, 2006 Rollmaster II(TM) features Aero-Casters® inflated with standard shop air to float paper, plastic, sheet metal, and coil rolls. As little as 1 lb of push can move 1,000 lb load, and device provides nearly frictionless omni-directional movement for roll alignment in tight spaces. Unit reduces risk of strain injuries and operator fatigue, provides clean, static-free operation, and has no moving parts. Optional handle mounted controls are available.

Jeco Plastic Products, LLC    Plainfield, IN 46168
Jul 27, 2006 RFID-Ready Pallets include slot specifically intended to accept RFID tag. Rotationally molded of linear low density polyethylene, pallet design allows RFID tags to be oriented in mold to maximize readability and protect tag from damage. Permanent RFID tagging can be accomplished by molding passive RFID tags directly into pallets.