Tanks

Material Handling & Storage, Welding Equipment & Supplies

Matrix Service Awarded EPFC of Two-Million Gallon LNG Tank for JAX LNG

November 11, 2016

TULSA, Okla., Nov. 07, 2016 - Matrix Service Company (Nasdaq:MTRX) announced today that its subsidiary, Matrix Service has been awarded the engineering, procurement, fabrication and construction of a 2 million gallon LNG tank for the JAX LNG Bunker Facility, a new LNG liquefaction and storage facility located at Dames Point near the Port of Jacksonville. JAX LNG is a joint venture formed by...Read More

Material Handling & Storage

Custom Stainless Steel Tanks for Paint Storage

October 31, 2016

On October 19, 2016, Keller-Angelillis completed two (2) 250+ gallon stainless steel tanks for Sea Hawk Premium Yacht Finishes of Clearwater, FL. Sea Hawk, the world's leading premium nautical coating brand, was looking to add additional paint storage tanks and called upon Keller-Angelillis to custom fabricate their request. The two round tanks were made out of T304 stainless steel. Both...Read More

Material Handling & Storage

Contech's UrbanGreen Rainwater Harvesting Tank Receives Uniform Plumbing Code Certification

October 5, 2016

WEST CHESTER, Ohio - West Chester-based Contech Engineered Solutions announced today that the UrbanGreen Steel Reinforced Polyethylene Rainwater Harvesting Tank has been certified to be in compliance with the Uniform Plumbing Code (UPC) by The International Association of Plumbing and Mechanical Officials (IAPMO) Research and Testing. Designated as an American National Standard, the UPC is a...Read More

Material Handling & Storage

Apache is Exhibiting at the Boston ISPE Product Show

September 30, 2016

Apache is exhibiting at the Boston ISPE Product Show on October 5th (Booth #W39). The ISPE is the International Society for Pharmaceutical Engineering, a not-for-profit association serving the pharmaceutical and bio-technology industry. Mike Peterson, in large tank sales and David Foulkes, representing small portable tanks will both be on-hand to answer any questions about...Read More

Material Handling & Storage, Transportation Industry Products

General Dynamics NASSCO Delivers Fourth ECO Class Product Carrier to American Petroleum Tankers

September 30, 2016

SAN DIEGO - On Monday, September 26, General Dynamics NASSCO delivered the fourth vessel in a series of five ECO Class product tankers under contract with American Petroleum Tankers. The Bay State was delivered during a special signing ceremony at the NASSCO shipyard in San Diego, CA. The Bay State is a 610-foot-long, 50,000 deadweight-ton, LNG-conversion-ready product tanker with a 330,000...Read More

Material Handling & Storage, Welding Equipment & Supplies

Logistics Plus Delivers four, 2-million pound gas tanks from South Korea to the United States

September 22, 2016

Online video provides amazing footage of the logistics required for the move. ERIE, Pa. - Logistics Plus Inc., a leading worldwide provider of transportation, logistics and supply chain solutions, is proud to report that it has successfully delivered four 30x24x17 meter, 1038 metric ton (2 million pounds), empty ammonia (NH3) gas tanks from Onsan, South Korea to Portland, Oregon in...Read More

Material Handling & Storage, Transportation Industry Products, Welding Equipment & Supplies

Quantum Fuel Systems Receives Department of Transportation Special Permit on VP-650(TM) Virtual Pipeline Trailer with Highest Available CNG Capacity – Approximately 650,000 Standard Cubic Feet

September 19, 2016

LAKE FOREST, Calif. - Quantum Fuel Systems, an industry leader in CNG (compressed natural gas) fuel systems for the automotive and heavy-duty industry, announced today that it has received a special permit from Department of Transportation (DOT) for its new VP-650™ virtual pipeline trailer which will have the highest capacity available in the industry at approximately 650,000 Standard Cubic...Read More

Material Handling & Storage

Beverage Carbonation Cylinder features hassle-free interface.

September 15, 2016

Measuring 22 in. in diameter and 75.25 in. high with 6 in. legs, 500 lb Cryogenic Beverage Carbonation Cylinder offers continuous flow rate of 6.5 lb/hr and peak flow rate of 10 lb/hr. Liquid cylinder vacuum sensor and optional digital reader take guesswork out of diagnosing vacuum issue, while Smart Fill device minimizes delivery time and acts as overfill protection device. Certified to ASME, cylinder is suited for restaurants, bars, movie theaters, and stadiums. Read More

Material Handling & Storage

Energy Storage System offers plug-and-play functionality.

September 12, 2016

Intended for residential use on new and existing grid interactive as well as off-grid renewable energy storage applications, AHITM Wave integrates Cradle to Cradle Certified™ Aqueous Hybrid Ion (AHI) Aspen battery technology. Features include inverter, with technology from Outback Power, as well as all wiring and communication devices. Minimal hardware, drop-in paneling, and simplified wiring inputs facilitate installation and setup. Base unit offers continuous 4 kW output and is scalable.
Read More

Explosives, Armaments & Weaponry, Material Handling & Storage, Services, Welding Equipment & Supplies

Raytheon Awarded US Navy MK 54 Torpedo Contract

August 31, 2016

TEWKSBURY, Mass. - Raytheon Company (NYSE: RTN) has been awarded a $37,723,774 firm-fixed-price, fixed-price-incentive, cost and cost-plus-fixed-fee contract for the procurement of MK 54 lightweight torpedo common parts kits; MK 54 Mod 0 lightweight torpedo kits; and MK 54 exercise fuel tanks, spares, production support material, engineering support, and hardware repair support. This contract...Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

Aero Tec Laboratories Appointed the Official Safety Fuel Bladder of JetPack Aviation

August 30, 2016

Aero Tec Laboratories (ATL) of Ramsey, NJ, the longtime innovators in crashworthy, flexible composite fuel bladder systems, is very pleased to announce that they have been chosen as the official fuel bladder supplier to JetPack Aviation. JetPack’s latest wearable flying device, the “JB-9”, is small enough to fit in the backseat of a car, yet powerful enough to take a pilot thousands of...Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

Assmann at WEFTEC 2016

July 18, 2016

Assmann Corporation of America will be exhibiting in Booth No. 2657 in New Orleans at WEFTEC 2016, September 24th-28th. On display will be Assmann’s Full Drain Outlet (FDO) assembly and a double wall tank. The FDO assembly drains tanks of 2,500 gallons and larger without mechanically installed nozzles. Assmann’s double wall tanks, from 20 to 8850 U.S. gallons, eliminate...Read More

Material Handling & Storage, Services

Tanks Direct was Contracted to Provide Holy Cross Hospital with one 7,500 Gallon Above ground Storage Tank

June 7, 2016

Tanks Direct was contracted to provide Holy Cross Hospital with one 7,500 gallon aboveground storage tank and one 15,000 gallon aboveground steel storage tank dedicated to feed a bank of (4) boilers and (3) generators using underground piping in conjunction with transition sumps and independent duplex pump sets that will provide the fuel between the tank and the boiler systems and generators....Read More

Material Handling & Storage, Thermal & Heating Equipment

Gemini and KB Systems Helped an Existing West Coast Customer Expand into a New Facility

June 6, 2016

Gemini and KB Systems helped an existing West Coast customer expand into a new facility in the southwest by providing an indoor automated ingredient system for both flour and sugar. The system included two indoor S/S flour tanks and one indoor sugar storage tank. The system was customized and reengineered to increase needed storage capacity within a space constrained building while still...Read More

Architectural and Civil Engineering Products, Material Handling & Storage

Custom Stainless Steel Tanks for Resin Storage

May 27, 2016

On April 28, 2015, Keller-Angelillis completed two (2) 6300 gallon stainless steel tanks for Nautique Boat Company of Orlando, FL. Nautique Boat Company was looking to upgrade their resin mixing and storage tanks and called upon Keller-Angelillis to custom fabricate their request. The two round tanks were made out of T304 stainless steel. Both tanks were 9ft-6" diameter with 12ft straight...Read More

Fluid & Gas Flow Equipment, Health, Medical and Dental Supplies & Equipment, Material Handling & Storage

Responsive Respiratory Expands Offering of Home Filling Cylinders

April 21, 2016

St. Louis, Missouri – RRI adds exclusive M6 and E cylinder sizes to their selection of home filling cylinders. Responsive Respiratory’s line of home filling cylinders, valves and cylinder cases offers providers genuine home filling solutions for a fraction of the cost.The expanded line of home filling cylinders, featuring exclusive M6 and E cylinder sizes, integrates with a major home...Read More

Material Handling & Storage

Air Reservoir Tank keeps chucks clamped in case of supply loss.

April 18, 2016

Used to feed air chuck with reserved air supply upon loss of shop air supply, safety air reservoir tank can keep chuck in clamped position for up to 20 min (depending on conditions). Unit includes check valve, filter-regulator unit, and 3 gal air tank with safe operating pressure of up to 150 psi (burst tested to 300 psi). Read More

Laboratory and Research Supplies & Equipment, Machinery & Machining Tools, Material Handling & Storage, Materials & Material Processing

Lab Attritor Mill Tanks feature replaceable bar grid.

March 23, 2016

Available for 01 and HD01 Lab Attritor models, optional tank design features replaceable bar grids and removable ball valve located under tank, facilitating discharge of slurry. Offered in both 750 cc and 1,400 cc sizes, tanks come in stainless steel or Tefzel-coated for metal-free applications. Water-jacketed, one-piece tanks will fit on all existing 01 and HD01 frames and are compatible with shafts, arms, and covers from those series of mills. Read More

Material Handling & Storage, Welding Equipment & Supplies

Non-Exploding Fuel Cell Tanks for Military Vehicles; Manned and Unmanned

March 16, 2016

Whether manned or unmanned, ground-defense vehicles benefit significantly from ATL’s Safety Fuel Cell bladder tanks. These tough, flexible fuel tanks deform on impact, suppress explosions with internal foam baffling, and can be coated for 7.62 self-sealing as well. Constructed of high-tensile rubberized fabrics, ATL’s fuel cell tanks cannot be dented, creased or vibration-cracked the way...Read More

Material Handling & Storage, Transportation Industry Products, Welding Equipment & Supplies

Lightweight Bladder Tanks Fueling The UAV Industry

March 3, 2016

Aero Tec Laboratories (ATL) of Ramsey, New Jersey, an AS 9100C registered company, manufactures extremely lightweight yet ultra rugged flexible fuel bladder tanks for the unmanned aerospace industry. Many industry leaders such as AAI/Textron, Boeing, General Atomics and Raytheon, depend on ATL’s bladder tanks to fuel their unmanned projects and provide a lightweight, maximum fuel capacity...Read More