Rayven, Inc.
St. Paul, MN 55104
Apr 28, 2006 Any-Pak is constructed using 2 mil polypropylene as substrate and with release coating that works with hot melt and PSA adhesives. Suited for products such as plastic bags, mailing envelopes, pouches, and security bags, liner is offered in 1.0, 1.25, 1.5, and 1.75 in. widths - all in 12,000 ft lengths. Other sizes are available on custom order basis. Remove to Expose Adhesive message is printed on one side.

UFP Technologies, Inc.
Georgetown, MA 01833 2107
Sep 22, 2005 Available in fabricated foam, laminated composite, and conductive/anti-static materials, case inserts and tote liners feature PNP (Part No. in the Pocket) labeling technology, which ensures positive component identification and protection. PNP labeling technology, located in bottom of tool or component silhouette pocket/cavity, is protected by clear, plastic laminate and aids in inventory control, component accountability, organization, and security.

Bernard Welding Equipment
Beecher, IL 60401
Jul 27, 2005 Jump Liners connect with standard liners at base of Q™-gun's rotatable neck and run through most common wear point up to contact tip. Q-Gun neck separates from handle without tools for liner changeover. When Jump Liner becomes worn or contaminated, operator detaches Q-Gun’s neck from handle, replaces only Jump Liner, and reattaches neck, eliminating need to replace entire 15 ft of standard liner.

CDF Corporation
Plymouth, MA 02360
Jul 26, 2005 Made from FDA-approved polyethylene, DrumSaverâ„¢, PailSaverâ„¢, and LinerProâ„¢ dissipate static charges from potentially flammable products. Anti-static liners and dust covers eliminate dry chemical static cling in containers that must remained covered according to OSHA standards and protect containers from product to ensure purity. Tested for performance using ASTM D 257 methods, products meet MIL-B-81705C standard and may be used in cleanroom applications.

CDF Corporation
Plymouth, MA 02360
Jun 22, 2005 Designed to fit internal shape of intermediate bulk containers (IBCs), Form-fit cube-shaped liners accommodate high-speed fills utilizing auto unfold feature that minimizes bag handling. Square bottom eliminates need for cassette and minimizes folds or pockets that trap residual product during dispensing. Choice of materials include Flexusâ„¢ monolayer, metallocene linear polyethylene; Barriaâ„¢ 3-layer lamination, metallized polyester; and Tenalonâ„¢ co-extruded nylon film.

CDF Corporation
Plymouth, MA 02360
May 04, 2005 Suited for mixing, pumping, and storing liquids, powders, or pastes, DrumSaverâ„¢ inserts protect steel drums from product while ensuring product purity. Straight-sided liners are available for use with follower-plates; accordion inserts feature flexible, pleated side walls; and combination inserts have straight-sided design with band of accordion pleats. Seamless, vacuum-formed products are secured with contoured lip snapped over open-head drum's top bead.

Abresist Corp.
Urbana, IN 46990-0038
Jan 14, 2005 KALMETALL®-TC utilizes chemically bonded elements of tungsten and carbon. Hard grains of tungsten carbide are combined through sintering process into tiles and shapes. Available in thin small tiles and larger thick pieces, KALMETALL-TC is suited for processing machinery components as well as pipes and elbows for pneumatic and gravity piping systems. It can be used for fan blades handling coal, ore, and other abrasive granular products such as sand, coke, and ferro-silica.

Abresist Corp.
Urbana, IN 46990-0038
Oct 13, 2004 Spray System applies KALCRET-S wear compound to large surfaces to achieve jointless lining. Wear and abrasion resistant KALCRET-S can be used at temperatures up to 2192°F and provides thermal shock resistance and oxidation stability.

Pacor Inc.
Cinnaminson, NJ 08077
Sep 13, 2004 Suited for use as acoustical control and thermal liner, flexible MICROMATâ„¢ high tensile strength blanket is composed of borosilicate incombustible, non-hygroscopic glass fibers. Unaffected by oil, grease, and most acids, product is available in various densities and thicknesses. It reduces air friction and damage, will not support fungi or vermin, and conforms to physical properties and regulations of ASTM C1071-2000.

Durex Products, Inc
Luck, WI 54853 0354
Jul 21, 2004 Available in staggered- and aligned-ceramic designs, Dur-X-Line® of Rubber/Ceramic Liners help extend chute life while minimizing liner replacement, maintenance, and downtime in aggregate and mining applications. Products feature alumina ceramic cylinders within liner and rubber backing that absorbs impact and prevents ceramic from shattering. Liners have solid steel backing and can be counter bored for installation via bolts or plug welding.

Packaging Concepts, Inc.
Virginia Beach, VA 23462
Apr 27, 2004 UNSA Polypropylene Container Liners install in as little as 10 min, converting standard ISO container into bulk transport system. They handle all types of loading and discharging including top hatches with spouts, conveyor loading through doors, and discharge with spouts and letterboxes. Liners also provide contamination protection for all dry flowable materials.

Polyflow, Inc.
Sterling, MA 01564 2304
Dec 22, 2003 Thermoflex® velocity strings are lined with Fortron® polyphenylene sulfide, which reduces friction to gas flow, lowers pressure drop, and provides resistance to acids and hydrocarbons. They also contain polyaramid fiber layer with Nylon 6 extruded over it and have smooth surface that lessens paraffin build-up. Inert products withstand brines, condensates, and hydrocarbons; come in 1 to 2 3/8 in. dia; and withstand temperatures to 250°F.

Andax Environmental
Rutherford, NJ 07070
Dec 04, 2003 Spouted Liners have no internal folds or wrinkles to capture product or impede processes. Using FDA-approved resin and 10 mil construction, liners are 100% leak-proof and designed to fit users' Intermediate Bulk Containers (IBCs). Customizable for unique applications, liners are offered with various seals and materials.

ITT Industries, Engineered Valves
Lancaster, PA 17603-2064
Dec 04, 2003 Dia-Flo® PFA Liner, for weir style diaphragm valves, is a fluoropolymer material that handles aggressive chemicals and is tolerant to temperatures up to 350°F. Molded into valve body using Line-Lok® feature, minimum 3mm thick liner helps to protect against permeating chemicals. PFA lined valves are available in ductile iron base body with 150 lb ANSI flanges in sizes 1–6 in.

Andax Environmental
Rutherford, NJ 07070
Nov 19, 2003 Form-Fit Open Top Liners are custom made using proprietary flexible film technology for applications from paint cans to storage tanks. Chemical-resistant, corrosive-proof, products protect tanks against moisture and allow reuse of drums and tanks. Made from FDA approved resin, liners are suited for processing tanks and containers, paint cans, buckets, and mixing vats.

Andax Environmental
Rutherford, NJ 07070
Oct 30, 2003 Closed Top Square Liners eliminate need to clean up storage totes and shipping containers. With dual fitment option for fill and discharge, user is assured of clean product storage. Liners provide sanitary conditions, protecting products from contamination or damage.

Andax Environmental
Rutherford, NJ 07070
Sep 17, 2003 Made from FDA-approved resin, round bottom Intermediate Bulk Container tank liners protect granular, powder, or liquid products from contamination and prevent leakage during shipping and storage. Products keep containers clean and eliminate need for decontamination after each use. Offered with optional fitments, flexible film products are customizable for user-specific applications with various seals and materials.

ITT Goulds Pumps
Seneca Falls, NY 13148
Aug 27, 2003 Ceramic media liners for Model SRL Slurry pumps incorporate one layer of ceramic rods molded and compressed with natural rubber to provide wear performance. Hard wear face aids in extending impeller and casing liner life. Suited for severe slag and ball mill circuits, liners are available for 4 models of SRL-XT pumps and 6 SRL-C models.

Abresist Corp.
Urbana, IN 46990-0038
Aug 19, 2003 KALMETALL® W hard overlay, welded steel linings can be self-supporting or installed into existing steel structures. They combine steel base composed of ASTM A-36 carbon steel or alloy plates with hard overlay welded chromium carbide protective layer. Steel base ranges in thickness from 3/16–1/4 in. with other sizes available. Standard alloy plates measure 48 x 96 in. and 60 x 120 in. Linings are suited for bunkers, mills, chutes, dust pipes, and cyclones.

Andax Environmental
Rutherford, NJ 07070
Aug 14, 2003 Form-Fit Gaylord Liners drop into Gaylord or flexible intermediate bulk containers. With smooth side walls and non-gusseted bottom, they're easy to load and dispense from. There are no folds, wrinkles, or creases to catch or hold product. Liners protect products from contamination or damage and are suited for powders, inks, and other granular products.