Parker Hannifin Corp., Cylinder Division
Des Plaines, IL 60016 3198
Jun 18, 2007 Designed for clamping, load holding, or E-stop applications, Series 3MA and 4MA cylinders hold loads in static condition while air pressure is removed from system. Available in 7 bore sizes ranging from 1.125-5.00 in., low friction 3MA cylinders have maximum operating air pressure of 250 psi and operating temperature range of -10 to +165°F. Intended for customization, 4MA units feature -50 to +250°F temperature range, standard and oversize rods, and externally removable rod gland.

Eaton Hydraulics
Eden Prairie, MN 55344
Jun 18, 2007 Offered as Vickers(TM) AM/MM/WM and Hydro-Line® AM/MM/SM Series, mill-duty cylinders feature 2-16 in. size range, hydraulic operating pressures of 2,000 and 3,000 psi, and pneumatic operating pressure of 250 psi. Units have standard stroke lengths up to 8 ft for various primary metals applications such as furnaces, casters, smelters, rolling mills, and stackers/reclaimers. Products also suit offshore, marine, and metal-forming industries.

Tol-O-Matic, Inc.
Hamel, MN 55340 9499
May 30, 2007 Designed to meet demanding applications, pneumatic MX Rodless Band Cylinder features stainless steel bands that will not expand like elastomer bands. Piston is isolated from applied load and remains isolated even when carrier is subjected to deflection, extending service life of piston seals. Offered with profiled rail, solid, or internal bearings, cylinder comes in inch and metric versions with polyurethane seals, clear anodized aluminum extrusions, and adjustable cushions.

Cyl-Tec, Inc.
Aurora, IL 60506
Mar 13, 2007 Manufactured with asbestos-free porous mass filler, US DOT- and TC-approved acetylene cylinders are suitable for welding, cutting, and other related purposes. All 75 cf and larger cylinders come with protective cylinder cap. Standard sizes, ranging from 10-145 cf, are stocked, and other sizes are available on request. Hydrostatic and ultrasonic testing and maintenance services are offered for keeping cylinders working safely and efficiently.

Airpot Corp.
Norwalk, CT 06851
Aug 10, 2006 Offered in 10 strokes and 4 bore diameters of 9.5, 16, 24, and 32.5 mm, AIRPEL-AB provides repeatable driving or supporting forces from 2 g to 58 kg at pressures from 5-100 psi. Stainless steel piston, fitted to cylinder bore, creates true air bearing airflow effect around piston, preventing its contact with cylinder wall. Force Without Friction® technology enables virtually unlimited piston cycle life with clean operation and no lubrication.

Cyl-Tec, Inc.
Aurora, IL 60506
Jul 19, 2006 High-pressure gas cylinders are made from 4130X Chrome Moly Steel. All size 300, 250, and 220 cylinders are manufactured by Billet Pierce process, while medical D through 150 size cylinders are manufactured by spinning process. Cylinders 80 cf and larger come with plain or embossed neckring and cylinder cap. Acetylene cylinders, aluminum cylinders, valves, caps, and neckrings are available.

AIRTEC Pneumatics, Inc.
Addison, IL 60101
Jun 09, 2006 ISO Cylinders have active or passive brake systems that hold cylinder's position by clamping onto piston rod. Active brake clamps or releases piston rod when either air pilot port is pressurized, while passive brake remains clamped onto piston rod until pilot port is pressurized. Both versions are available with optional pressure switch that provides electrical signal output.

Tol-O-Matic, Inc.
Hamel, MN 55340 9499
May 24, 2006 BC Series features Endurance Technology^SM that incorporates stainless-steel band, rigid extruded aluminum tube, and internal air cushioning. Load is supported through entire stroke, minimizing seal wear. Model BC4 features self-lubricating floating bearing system, while BC2 includes engineered resin load bearings and independent piston. Recirculating ball bearing system is incorporated into Model BC3, and Model BC3D features 180º carrier for moment load capacity.

Bimba Manufacturing Co.
Monee, IL 60449 0068
Mar 30, 2006 Designed for maximum air pressure input of 125 psi, High Flow Booster 2:1 is available in 4 in. bore size that results in maximum cylinder output pressure of 250 psi. Compact design, with body and center section made of aluminum hard coat with PTFE, suits applications with limited space. Product handles operating temperatures from 15 to 160°F and is designed for intermittent use, such as maintaining pressure in reservoir.

Beswick Engineering Co., Inc.
Greenland, NH 03840
Dec 07, 2005 Beswick 1 in. bore cylinders are made from brass or stainless steel with clevis style tail. Long-life linear actuator has piston rod supported with 2 composite bushings: one in nose, and other in tail assembly. Separated bushings adequately support couples induced by side loads and/or stress reversals. Rebuildable products feature dynamic lip seals with U-shaped cross section and do not require lubricated air supply. Force factor is 0.78 in extension and 0.70 in retraction.

J. W. Winco, Inc.
New Berlin, WI 53151
Nov 17, 2005 Primarily used with pneumatic or hydraulic cylinders, Metric Fork Heads (yokes) are available with clevis pin and circlip or clevis pin with snap-on securing collar. Fork body is manufactured from steel, with zinc-plated, blue passivated finish. Stainless steel versions are available upon request. Standard thread types are available in M4 x .7 through M20 x 2.5 thread sizes with pin diameters from 4-20 mm. Left-hand and fine-pitch thread types are also available.

Numatics
Mt. Pleasant, TN 38474
Sep 30, 2005 GeoMetric® Series features dual groove design that consists of traditional round groove and CombiGroove®, which accepts round and angular switches and sensors. Products encompass sintered bronze rod bushing and are available in 6 bores sizes from 32-100 mm with stroke lengths from 2 mm to 2 m. Pneumatic cushioning can be regulated via brass adjustment screws. Stainless steel piston rod and high-temperature seals are available as options.

Dadco, Inc.
Plymouth, MI 48170-2598
Jun 21, 2005 Constructed with stainless steel square rod that prevents rotation, Series HP.N includes adjustable cushion control, aluminum piston, built-in lubrication system, and position sensing capability. Units are offered in multiple bore sizes from 32–100 mm diameter with stroke lengths from 25–500 mm. Variety of mount options and accessories are available to meet customer requirements.

Norgren
Littleton, CO 80120
Mar 11, 2005 Available in diameters of 25, 32, and 40 mm, Lintra Lite® Series features sealing system on inside and outside of cylinder tube to prevent loss of air and ingress of dust. Movement is from carriage running on side of cylinder barrel, and stroke lengths can be specified up to 235 in. With operating pressure of 14–116 psi and temperature range of -22 to +176°F, cylinders are suited for compressed air environments that are filtered, lubricated, or non-lubricated.

Hyson Products, Associated Spring
Brecksville, OH 44141
Feb 14, 2005 Featuring modular design, High Pressure Compression Tank is engineered for use at 2,175 psi. It includes rupture disc plug for added safety and multiple ports on each end for flexibility. Three models in series provide standard volumes from 100–460 cu-in.

Norgren
Littleton, CO 80120
Dec 17, 2004 NFPA stainless steel cylinders are available as double acting, magnetic piston with buffer or adjustable cushioning. Actuators can be specified with bore sizes up to 8 in., and operating temperature range is -40 to +200°F. All internal components come lubricated with Teflon®-based grease. Designed for push and pull applications, cylinders can be operated with filtered compressed air to 250 psi or petroleum based hydraulic fluid to 400 psi.

Bosch Rexroth Corp., Pneumatics Div.
Lexington, KY 40511
Oct 20, 2004 Corrosion-resistant ICS cylinder has smooth surface for easy cleanup. It is offered in 304 and 316 stainless steel and lubricated with food grade grease. Cylinder meets ISO 6431 standards and has threaded end caps for increased life and easy repair. Adjustable cushions, with hygienic male cushion screw, bumpers on both ends, and Viton seals are available for high-temperature environments. Bore sizes range from 25–100 mm.

Bosch Rexroth Corp., Pneumatics Div.
Lexington, KY 40511
Oct 20, 2004 ICL Air Cylinder works in secondary packaging/handling applications. It meets ISO/VDMA standards and has hard anodized aluminum surface with stainless steel screws and piston rods. Magnetic piston allows installation of micro-sensors on integrated external rail, without any grooves for particles to collect. Adjustable cushions and noise reducing bumpers on both ends are standard, and Viton seals are available for high temperature environments. Bore sizes range from 32–125 mm.

Mack Corp.
Flagstaff, AZ 86004
May 11, 2004 Miniature Air Cylinders operate on plant air using standard valve circuits with wide choice of mounting and porting options in various materials. Cylinders are suited for production tooling, automated processes, and general-purpose industrial applications. Basic design is to US Customary specifications, but all products are offered in metric versions.

Humphrey Products
Kalamazoo, MI 49003
May 03, 2004 Cylinders incorporate reversible piston and internal design that provides smooth, no-drag movement and clean breakaway. V-seal design prevents seal collapse and blow-by, ensuring constant contact with cylinder barrel. Products feature stainless steel barrels and piston rods, oil permeated ball-sized rod bushings, roll-formed threads, and full, unrestricted porting. Available in single and double-acting models, bore sizes range from .50–2.50 in.