M-Rock    Centennial, CO 80016
Nov 10, 2004 Featuring U-shaped lens cradles and thick, closed-cell foam, Everglade and Sierra bags protect SLR digital cameras with attached lenses up to 6 in. long while keeping weight off lens. They include triple protection rain flaps, zippers, and buckle closures, as well as water-resistant material and weather jacket for complete rain protection. Suited for long trips, bags offer non-pinching shoulder straps, neoprene handles, belt loops, and detachable compartments.

BurkTek Inc.    Kansas City, MO 64188
Nov 08, 2004 Flexible, yellow, doughnut-shaped Cordpro® divides, stores, and dispenses extension cords up to 100 ft in length without springs, ratchets, or motors. Portable system also stores and protects cord-ends when not in use. Product dispenses only required amount of cord, stopping payout when user stops pulling. Made of HDPE, unit is welded together at inseam, which is covered with rubber grip.

TestEquity LLC    Moorpark, CA 93021
Nov 08, 2004 TestEquity Model 115 provides full-range temperature testing in compact floor standing or benchtop package. Powered from standard 120 V line, it measures 16 x 12 x 14 in. Working temperature range is -73°C to +175°C. Unit includes 256-step programmable temperature controller with RS-232 interface, independent high/low temperature limit control with alarm, viewing window and interior light, shelf, and two 2 in. access ports.

Optima Electronic Packaging Systems    Lawrenceville, GA 30043
Nov 05, 2004 Offered in 19 and 24 in. widths, NEBS-compliant Cabinets combine heavy-duty aluminum extrusions with 7 gauge steel base for floor-mounting design that resists shock, bending, and vibration stresses. Compliant with Bellcore TR-63/ANSI-329, units suit telecom, defense, aerospace, and rack-mount computer applications. Each is customized to meet requirements, ensuring that details such as cooling, mounting, cable ducting, and power distribution are pre-installed.

Rittal Corporation    Springfield, OH 45504
Nov 02, 2004 Optipanel features extruded aluminum housing and front frame, die-cast zinc protective corners, and flexible gasketing trim. Panel housing is available in 3 depths: 50, 100, and 150 mm. Retaining clamps provide flexibility to install variety of standard operator interface display panels. Installation depths for keyboard housing are 50 or 100 mm. Panel can be customized with operator panel housing, mullion, rear wall, and keyboard housing.

Brady Corp.    Milwaukee, WI 53201 2131
Nov 02, 2004 Designed to facilitate group lockout of equipment, injection-molded lock boxes are offered in 2 models: Portable Plastic Lock Box, which accommodates up to 16 locks, and Mini Wall Lock Box, which accommodates up to 8 locks. Chemical-resistant products work in industrial environments and feature lock rail that prevents lid from being opened when one or more locks are attached. Transparent polycarbonate windows offer clear view inside each box.

LINPAC Materials Handling    Georgetown, KY 40324
Oct 27, 2004 ROPAKâ„¢ Extended Length reusable container features 56 x 48 in. footprint to accommodate long and hard-to-fit component parts. Constructed of high-density polyethylene, container is available in heights of 25, 33, 34, and 42 in. RFID-ready unit features 4-way fork entry and variety of sidewall configurations, with 0, 1, 2, 3, or 4 hinged drop doors available to allow access to contents. Containers can be stacked up to 6 high without racking.

LINPAC Materials Handling    Georgetown, KY 40324
Oct 27, 2004 Offering load capacities up to 2,000 lb, ROPAKâ„¢ 4048 reusable, collapsible containers feature standard footprint of 40 x 48 in. with heights of 25, 29, 34, 39, 42, 47, and 50 in. All are high-density polyethylene to withstand abuse of multiple return trips. Side drop doors with articulating hinges allow open door to lie flat against side of container for tight, safe storage. RFID-ready containers can be stacked up to 6 high with no racking.

Buckeye ShapeForm    Columbus, OH 43207
Oct 26, 2004 SM Series Cases are constructed from 0.062 in. aluminum with alodine finish and have 19 in. wide front panel of 0.125 in. etched and anodized aluminum. Models are available without vents or side panel chassis-mounting holes, or with top and bottom vents and side panel chassis-mounting holes. Cases are available in 3½, 5¼, 7 and 8¾ in. heights, and depths of 10, 13, 16, and 20 in. Options include heavy duty aluminum handles and internal mounting chassis.

Stanley Vidmar    Allentown, PA 18105 1151
Oct 25, 2004 With customized pallets, Stak System® adjustable storage system accommodates storage requirements of virtually any business. Standard pallet options include reel dispensers, barrel storage, and tool holders. Some custom units include base pallets that rolls out like drawers, extra-wide pallets to store all-terrain vehicles for military, and Flow Through Pallets for use where local codes require overhead sprinkler systems.

TAH Industries, Inc.    Robbinsville, NJ 08691 1603
Oct 22, 2004 Two-component, closed-end cartridges feature multi-seal pistons with pre-staged bleed plugs, and wide shelf at back end for option of applying foil seal. Hermetically-sealed outlet breaks off cleanly, while re-sealable cap offers identification marks to prevent cross-contamination. Sizes include 50, 200, 400, and 600 ml.

Snap-on Industrial    Kenosha, WI 53141 1410
Oct 22, 2004 Black Lights 40 in. Roll Cab and Top Chest offer 7 and 4 drawers, respectively. Roll cab's top drawer provides 250 lb capacity for heavier tools, while other drawers offer 125 lb capacity. Powder-coated, gloss black outer cabinet borders extruded drawer fronts made of 6463 T5 alloy aluminum. Hand-buffed fronts come in bright hues including Headlight Silver, Mars Red, and Deep Blue Purple. Lock 'n Roll® system prevents drawers from drifting open.

Bosch Rexroth Corp., Pneumatics Div.    Lexington, KY 40511
Oct 20, 2004 Corrosion-resistant ICS cylinder has smooth surface for easy cleanup. It is offered in 304 and 316 stainless steel and lubricated with food grade grease. Cylinder meets ISO 6431 standards and has threaded end caps for increased life and easy repair. Adjustable cushions, with hygienic male cushion screw, bumpers on both ends, and Viton seals are available for high-temperature environments. Bore sizes range from 25–100 mm.

Bosch Rexroth Corp., Pneumatics Div.    Lexington, KY 40511
Oct 20, 2004 ICL Air Cylinder works in secondary packaging/handling applications. It meets ISO/VDMA standards and has hard anodized aluminum surface with stainless steel screws and piston rods. Magnetic piston allows installation of micro-sensors on integrated external rail, without any grooves for particles to collect. Adjustable cushions and noise reducing bumpers on both ends are standard, and Viton seals are available for high temperature environments. Bore sizes range from 32–125 mm.

Creform Corp.    Greer, SC 29652-0830
Oct 19, 2004 Portable Tool Cart allows storage, management, and employment of hand tools needed to complete specific, repetitive assembly, or maintenance tasks. System allows user to design and build custom application structures by utilizing a range of pipes, joints, and hardware accessories. Assortment of caster styles and wheel diameters are available for various surfaces and mobility requirements. Foam sheeting is provided with cutout compartments for each tool.

Eurobex Mfg. Ltd.    Blainville, QC J7C 5E2  Canada
Oct 19, 2004 Industrial Electronic Racks accommodate 19, 24, and 23 in. electronic and telecommunications equipment. Using components from grid rail system, rack angles can be positioned anywhere within Mtrx modular cabinet frame. Fixed shelves, pull-out shelves, drawers, guides, and panels can be installed directly on rack angles. Rack frame can be closed for NEMA 12 applications or left open for NEMA 1 applications. Lifting eyebolts and leveling feet are included.

RIDGID    Elyria, OH 44035
Oct 18, 2004 Weighing 30 lb, portable Model 425 features integral handle that allows for one-handed opening and closing. Self-locking latch automatically engages, eliminating need for leg chain. Bent-leg design increases stability, and work surface is equipped with 2 tool holders. Product is designed for service applications and suits steel, copper, and PVC piping.

Strong Hold Products, Div. of Fabricated Metals LLC    Louisville, KY 40209-0043
Oct 15, 2004 Made from 12-gauge all-welded stainless steel, wardrobe-style cabinets have 3-point locking mechanism in door to securely store equipment and valuables. All units are equipped with three 14-gauge shelves and one hanger rod. Also available: 4-drawer models with two 3 in. high drawers and two 4 in. high drawers, and 7-drawer models with four 3 in. high drawers and three 4 in. high drawers. All drawers measure 20 in. deep.

FKI Logistex North America    St. Louis, MO 63132
Oct 15, 2004 Cleco Condor is an all-electric, free-roaming, and fully automatable aisle-changing crane that has max horizontal speed of 9.5 ft/sec, max vertical speed of 1.6 ft/sec, and weight capacity of 3,300 lb. Utilizing synchronized traversing or rotating forks or telescopic shuttles to handle load, it can maintain carrying capacity and operating speed at high elevations. Battery charges during in-aisle operations.

Abresist Corp.    Urbana, IN 46990-0038
Oct 13, 2004 Spray System applies KALCRET-S wear compound to large surfaces to achieve jointless lining. Wear and abrasion resistant KALCRET-S can be used at temperatures up to 2192°F and provides thermal shock resistance and oxidation stability.