Crown Equipment Corp.    New Bremen, OH 45869
Apr 10, 2012 Suited for demanding warehouse applications, Crown WP 3000 Series features brushless AC motor technology for responsive acceleration, smooth direction changes, and consistent performance throughout battery discharge cycle. e-GEN braking system utilizes full-motor braking and returns energy to battery for efficiency gains. Featuring ergonomic design, X10® Control Handle has raise/lower buttons that are ideally positioned for blending lift/lower and traction regardless of travel direction.

Mitsubishi Caterpillar Forklift America, Inc.    Houston, TX 77043
Mar 13, 2012 Reaching max speed of 9.3 mph, Jungheinrich® ECR 327/336 Series is suited for order picking, long distance transporting, and loading/unloading trailers. Electric units feature regenerative braking system that provides seamless transition from one direction to another while maintaining load stability. Proprietary Jungheinrich-built motor and controller enable optimal gradeability on inclines. For durability, ECR series features cast steel frame and sealed electrical components.

Southworth Products Corp.    Portland, ME 04104 1380
Jan 30, 2012 Available in fork-over and straddle designs, Stack-n-Go(TM) stackers are designed for maneuverability and built on short, stable wheelbases. Multi-purpose machines can be used for transporting loads on pallets and stacking loads up to 7 ½ ft high and can also serve as adjustable workstations for loading/unloading. Offset control handle and 62 in. high mast give operator clear forward view, and ergonomic handle puts all controls within reach.

Mobile Industries, Inc.    Mississauga, ON L5C1W2
Nov 01, 2011 Along with 3,300 lb capacity for moving pallets and skids, ESET33 features electric battery-powered drive system for forward/reverse operation. Charging is accomplished overnight via 110 V outlet, and onboard 24 V battery pack can operate for 8+ hr. Able to achieve speeds to 2.8 mph fully loaded and 3 mph unloaded, truck is available with 48 in. fork length with 20.5 and 27 in. fork width options. Manual pump, operated via ergonomic handle, raises load to full height with 5 cycles.

Mitsubishi Forklift Trucks    Houston, TX 77043
Jul 15, 2011 Equipped with brushless AC-powered drive motor, PWT15 and PWT18 Heavy-Duty Electric Walkie Straddle Stackers offer electric power steering option, giving operators precise control when traveling at any speed. Stackers can be powered up by using key or with optional keyless access pad. After set amount of time of inactivity, auto shutdown feature powers forklift down, conserving energy. Regenerative braking system smoothes out directional changes while minimizing component wear.

Mitsubishi Forklift Trucks    Houston, TX 77043
Jun 03, 2011 Jungheinrich® EJC B14/EJC B16 Electric Walkie Straddle Stacker is equipped with proportional lift/lower control, multifunction control tiller head, and dual articulating load wheel design. Regenerative braking allows energy to be fed back into battery for maximum run times, while precise speed and torque control facilitates maneuvering in confined warehouse applications. Using crawl speed button, stacker can travel with handle in upright position.

Crown Equipment Corp.    New Bremen, OH 45869
Feb 09, 2011 Available with Crown PC 4500 Series rider pallet trucks, QuickPick(TM) Remote Advance System enables order pickers to remotely advance truck to next pick location without having to return to operator's compartment. Users can choose between 2 wireless remotes: transceiver glove or transceiver trigger. Utilizing lasers to detect obstacles, system applies brakes if obstacle is detected. Pairing procedure ensures that each module operates one truck at a time.

Crown Equipment Corp.    New Bremen, OH 45869
Aug 09, 2010 Designed to accommodate Plug Power GenDrive(TM) fuel cells, PC 4500 Series Center Control Pallet Truck incorporates controls and gauges for fuel cell into dashboard. This negates need for operator to stop operation to access control box and check fuel cell status. Able to operate in conditions as low as -20°F, truck features fuel cells behind operator and offers features such as power steering, Access 1 2 3® technology, and ergonomic X10® handle.

Meissner Filtration Products, Inc.    Camarillo, CA 93012 8760
Jul 16, 2010 Available in standard sizes of 100, 200, 500, and 1,000 L to fit TepoFlex® 3D biocontainers, FlexStation(TM) Rigid Outer Containers are available with 304 stainless steel mobile cart and pallet truck. Optional mobile cart for 100 and 200 L containers features forklift-compatible stainless steel frame with polyurethane caster wheels and removable push handle. For 500 L and 1,000 L containers, optional stainless steel mobile cart features swivel caster wheels and forklift loading from dual sides.

Douglas Machine    Alexandria, MN 56308 3399
Apr 02, 2010 Capable of running product heights from ¾ to 4 in., Velocity® II gently forms stacked product pack patterns without interruption, delivering continuous flow at speeds to 600 products/min. Intelligent programming accurately counts products and automatically adjusts product flow rate to prevent jams. Featuring servo controls for quick tool-free changeovers, stacker supports numerous pack patterns and does not require pre-stacking or priming, resulting in rapid startups.

Jungheinrich Lift Truck Corp.    Houston, TX 77043
Jan 08, 2010 Powered by 2 maintenance-free, 12 V gel batteries, Model EME 114 achieves outputs up to 1,000 W for drive engine or 800 W for lifting engine. Pedestrian-controlled truck travels at speed of 5 kph with climbing gradients of 8% without load and 5% with load. Built-in charger can be plugged into any 230 V socket. In addition to externally visible charge status display, energy management system includes operating hour meter and feature that automatically blocks unintentional start-up.

Jungheinrich Lift Truck Corp.    Houston, TX 77043
Jan 08, 2010 In addition to multifunction tiller head and optional sideways battery removal, EJE series offers clearly arranged rocker switches with contactless electronics that ensure safe operation. Range 1 models EJE 116/118/120 have 494 mm front length to promote maneuverability and support loads to 2,000 kg. Range 2 models EJE 220/225 have 2,500 kg max capacity and are built to withstand continuous application with heavy loads as well as 3-shift operation under rough conditions.

TCM Manufacturing USA, Inc.    West Columbia, SC 29172
Jun 19, 2009 WB Walkie, ER Walkie/Rider pallet trucks, CR Series center rider pallet trucks, ST Series walkie stacker pallet trucks, CB Series counterbalanced walkie stackers, and TR100 tow tractor are certified Class III by Industrial Truck Association. Featuring DC power, WB Walkie, ER Walkie/Rider pallet trucks have load capacity of 6,000 and 8,000 lb. Available in single or double pallet models, CR Series center rider pallet trucks have load capacity of 6,000 and 8,000 lb.

Raymond Corporation, The    Greene, NY 13778 0130
Feb 27, 2009 Able to operate in aisles as narrow as 66 in., 9000 Series Swing-Reach® trucks employ AC technology for longer battery run times, regenerative lowering, and LED compartment lights. ACR System(TM), which combines AC drive motor and AC lift motor, promotes acceleration, smooth direction changes, as well as quiet and precise traction and lift. Used for pallet handling or case picking, trucks can elevate up to 45 ft and handle loads up to 60 in. deep or 108 in. wide.

Crown Equipment Corp.    New Bremen, OH 45869
Feb 19, 2009 Crown PC 4500 Series includes Access 1 2 3® technology that automatically reduces truck's speed as steer angle increases during turn, optimizing operator safety as well as truck stability. Also incorporated are ergonomic X10® handle, button that enables thumb control for forward and backward movement, and operator-sensing floorboard. Crown Insite(TM) system utilizes on-truck electronic systems, wireless fleet management tools, and fleet cost-tracking software to gather data.

Presto Lifts, Inc.    Attleboro, MA 02703
Feb 05, 2009 Available with ergonomic features and narrow mast design, Power Stak(TM) Lite line can handle 1,500 lbs. capacity. Featuring a 110 V built-in charger, stacker is powered via two 12 V maintenance-free batteries. Forward and reverse thumb switches are located on both sides of handle to accommodate left- or right-hand operation, auto-reversing belly switch protects operators from potential injury when walking unit backwards, while automatic brake immediately halts travel when reversed.

Raymond Corporation, The    Greene, NY 13778 0130
Nov 07, 2008 Ensuring models would represent the real lift trucks in thorough detail, Model 7400 Reach-Fork® truck and model 8400 pallet truck are replicated on 1/12 scale. Model 7400 comes with array of working parts, including three-stage mast and pantograph mechanism. Model 8400 includes swiveling handle, drive unit, and rotating handle. All wheels of replica turn and caster wheels swivel.

Raymond Corporation, The    Greene, NY 13778 0130
Jul 18, 2008 Along with AC motors, Model 8900 incorporates ACR System(TM) to promote acceleration, smooth operation, and energy efficiency in dock operations, trailer loading/unloading, and transporting pallets horizontally. Truck is available in 6,000 and 8,000 lb capacities, and fork carriage design has long-wearing components. Optional operator compartment sensor system decelerates moving truck if beams are blocked and will not permit travel until object blocking sensors is removed.

Seegrid Corporation    Pittsburgh, PA 15201
Apr 29, 2008 Employing Industrial Mobile Robotics technology, Model GP8 transports pallets to assigned location, automatically positions them, and returns to original starting point or other pre-assigned location for more work. IMR technology enables it to move through manufacturing, warehousing, and distribution operations, using stereo cameras to build 3D map of environment. Vehicle then uses map and reasoning ability to navigate predetermined path to complete assigned transport task.

Spartanics    Rolling Meadows, IL 60008
Apr 25, 2008 Finestac Nested Part Finisher® fully automates extraction and stacking of gaskets and similar die cut nested parts. Batch count can be preset, and unit comes with color touch screen and software. Finisher works inline with any die cutting system, and extracts parts so that they are scratch-free in stacks up to 89 mm tall. Scrap material is collected on conveyor and transported to separate waste bin.