Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jun 03, 2008 DIN Rail Modular Jack Installation Kit includes plastic rail-mount adapter, shielded modular jack, and 2 tie wraps. AMP-TWIST 6S SL Modular Jack fits into adapter, which features cable strain relief and angled configuration so that jack interface is at 45°angle downwards for easier management in cabinet. Jack meets Category 6A performance requirements, making it compatible with applications up to 10 Gb/s. Optional color-coded covers are available for identifying jacks by function.

GaleWrap
Douglasville, GA 30134
Mar 18, 2008 Offering alternative to conventional hand wrapping, Model GW-3500(TM) combines pallet wrapper and pallet jack in one unit that runs at 11 rpm and can handle 70 in. diagonal loads. System includes manually adjustable film tension, up/down wrapping cycles, independent top and bottom wrap pattern selection from 1-9 wraps, and splash-proof wrapping mode. Minimizing wasted film and worker injuries, pallet wrapper prevents failures by securely wrapping each load.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jun 30, 2006 Featuring integrated cable cutting blade arrangement and 2-piece construction that facilitate installation and shield termination, reusable SL Series AMP-TWIST shielded modular jacks mitigate alien crosstalk found in high-speed networking. Products have integrated cable strain relief and are suited for networks operating at 10 GigE, Gigabit Ethernet, 10/100BASE-TX, token ring, 155 Mbps ATM, 100 Mbps TP-PMD, ISDN, video, analog voice, and digital voice (VoIP).

Power Jacks Limited
Fraserburgh, Aberdeenshire AB43 8TE  United Kingdom
Dec 13, 2005 Anode jacking system combines positional accuracy, speed variation, and continuous-duty cycles, enabling anode to be adjusted in conjunction with alumina feed. Designed and manufactured for aluminum smelting anodes, complete system includes motors, gearboxes, drive shafts, and couplings. Heavy-duty products feature keyless, hexagonal drive ends; high-temperature grease; double bearing arrangement for worm shaft; and one-piece rod end and lifting screw.

Sumner Mfg. Co.
Houston, TX 77088 4036
Sep 23, 2005 Pack-Jack, part No. 781100, has folding legs made from 1 in. square tubing and adjustment screw made from heavy wall tubing. In folded position, legs are less susceptible to damage and occupy one third of space taken up by non-folded jack. Product comes with standard vee head, but ball transfers can be used with vee for alternate head option. Able to handle up to 36 in. dia pipe, it has 2,000 lb capacity and carrying handle for portability.

North American Resources, Inc.
Anoka, MN 55303
Feb 15, 2005 With Turnabout™ Adapter, length of pallet jack becomes turning diameter of unit. Unit works to get pallet jack positioned under pallet, and is designed to lift up and out of the way so it doesn't affect stability of pallet jack when handling heavy loads. Turnabout™ installs with clamp system so there are no holes to drill.

Power Jacks Limited
Fraserburgh, Aberdeenshire AB43 8TE  United Kingdom
Jan 24, 2005 Series S Metric Screw Jacks feature finned sections which faciliate heat dissipation in gearbox. Oil lubricated gearbox ensures full lubricant contact with gear teeth to minimize wear and aid cooling. Flexible design allows mounting access from 2 sides to position screw jack at any angle, eliminating need for conventional upright and inverted screw jack variants. Three gear ratios with 2 lifting screw leads cover range of linear travel rates.

Power Jacks Limited
Fraserburgh, Aberdeenshire AB43 8TE  United Kingdom
Dec 14, 2004 Available in capacity ratings from 10–300 kN, Metric Ball Screw Jacks provide extra safety in case of ball failure or excessive wear in screw jack. In event of excessive wear in ball screw drive, safety device will contact screw shaft and act as ACME thread, providing drive and offering early warning of any possible ball screw failure. Safety device also allows ball nut on screw jack to sustain load in event of catastrophic ball failure.

Nook Industries, Inc.
Cleveland, OH 44125
Jun 30, 2004 Ranging in capacity from 5–200 kN, ActionJac ball screw and trapezoidal screw jacks provide complete range of universally accepted mechanical actuators. Nook accessories, including boots, limit switches, top plates, clevises, trunnion mounts, and IEC motor mounts, are available for metric jacks.

Snap-on Industrial
Kenosha, WI 53141 1410
Jun 08, 2004 Weighing 37.5 lb., Blue-Point™ RACEJACK requires 7 strokes to attain full height capacity of 17.52 in. Jack features one-piece casting lift arm and rubber bumper on handle bottom to protect vehicle finish. Double knurl top on 2-piece, 47.25 in. long handle helps user maintain grip during operation, and front roller wheel adds to stability. Breather valve prevents hydraulic lock and ensures smooth lifting.

RADIALL Inc
STRATFORD, CT 06615
May 05, 2004 USCAR Plugs and Jacks offer cable retention force up to 110 N for standard 5/50 cable RG58 and 2.6/50 cable RG316. They are usable up to 6 GHz and optimized for frequency range of 0–4 GHz. Units support all RF applications found in cars such as radio and TV broadcast, GSM, and GPS. They withstand temperature range of -40 to +110°C, and are available with all types of coaxial connectors, from microminiature UMP to standard SMA.

Kycon Inc.
San Jose, CA 95125
Mar 26, 2004 Available in 2, 4, and 8 port versions, side entry jacks feature integrated LEDs located at top of connector for inspection of system activity. Multi-port RJ45, category 5, right angle connector with LEDs is fully shielded with grounding top and side tabs for panel grounding and EMI/RFI protection. Products are suited for telecommunications, security systems, networking systems, and multi-media set top box applications.

Arbor International, Inc.
Ann Arbor, MI 48103
Mar 19, 2003 Felco Low Lift Precision Hydraulic Jacks are small, lightweight and portable. They fit under heavy machinery and equipment in tight areas that are hard to reach. Lifting height can be adjusted within few thousandths of an inch. Jacks come in 10, 20, and 30 ton capacities. Ten ton model weighs only 8 lb. Each includes height adjusting spacers in wooden box.

Joyce/Dayton Corp.
Dayton, OH 45401-1630
Aug 05, 2002 Metric Machine Screw Jacks consist of 10, 25, 50, and 100 Kilonewton jacks, which are roughly equivalent to 1, 2 1/2, 5, and 10 metric tons. Upright or inverted, jacks operate at full capacity whether load is in tension or compression. Units feature heat treated alloy steel worm shafts, aluminum/bronze worm gears, and tapered or ball bearings. They are offered in translating screw and keyed designs. All can be fitted with protective boot.

Joyce/Dayton Corp.
Dayton, OH 45401-1630
May 23, 2002 Four sizes of ball screw jacks have been added to product line, including second model of company's 10-ton unit, plus addition of 20-ton, 30-ton, and 50-ton units. Redesigned 10-ton ball screw jack has longer life ball nut and screw than previous model. All have Timken bearing arrangement that fully captures gear, giving radial support for work gear alignment, increased thrust capacity, longer gear life and reduced screw oscillation.

Pfaff-Silberblau Canada Inc.
Mississauga, ON L5T 2L5  Canada
Jan 02, 2002 Rack and pinion steel jacks provide safe, smooth lifting operations. Safety crank has double acting brake for secure load holding and heat-treated gears for low cranking effort. Configurations include adjustable toe, fixed toe, and cable reel styles in lifting capacities from 3,300 to 22,000 lbs.