Isolation & Support Structures

Fluid & Gas Flow Equipment, Health, Medical and Dental Supplies & Equipment, Material Handling & Storage

EndoChoice® Announces FDA Clearance of its Orca(TM) Sterile, Single-Use Air/Water and Suction Valves

May 25, 2016

New Sterile, Single-Use Valves to be Presented at DDW® 2016 and the SGNA 43rd Annual Course ALPHARETTA, Ga. - EndoChoice Holdings, Inc. (NYSE: GI) announced it received 510(k) clearance for its new Orca™ sterile, single-use air/water and suction valves for Olympus® 160, 180 and 190 Series flexible endoscopes.  Recently published clinical guidelines from Association for the Advancement of... Read More

HVAC, Material Handling & Storage, Green & Clean

Rotary Screw Compressors feature VFD technology.

May 23, 2016

Equipped with Siemens drive technology, Model SFC 132 has flow range of 194–918 cfm at 125 psig, while Model SFC 160 has flow range of 240–1,090 cfm at 125 psig. Both feature eco-friendly filter element, integral moisture separator with drain, and Electronic Thermal Management system. Compressors also come standard with Sigma Control 2™ intelligent controller, which offers optimized communication capabilities for seamless integration into plant control/monitoring systems and industrial IoT. Read More

Controls & Controllers, Fluid & Gas Flow Equipment, Material Handling & Storage, Mounting & Attaching Products, Green & Clean

Pulsation Dampener supports AODD pump applications.

May 9, 2016

Constructed of 316L stainless steel with PTFE diaphragm, AODDampener is specifically designed to eliminate pulsations in air operated double diaphragm pump applications. Unit employs automatic air control that utilizes existing compressed air source in AODD pump system for charging. As fluid line pressure increases, air charge in dampener is increased to match it. When line pressure drops, dampener bleeds off charge, keeping dampener optimally charged for maximum dampening effect. Read More

HVAC, Material Handling & Storage

WABCO and Cummins Enter into New Long-Term Agreement to Manufacture and Supply Air Compressors for Markets Globally; Contract Expands Scope of Existing Joint Venture Based in United States

May 4, 2016

BRUSSELS, Belgium – WABCO Holdings Inc. (NYSE: WBC), a leading global supplier of technologies that improve the safety, efficiency and connectivity of commercial vehicles, today announced that it has entered into a new long-term agreement with Cummins Inc. (NYSE: CMI) to manufacture and supply high-performance air-compressor technology globally. This major contract expands the scope of... Read More

Fluid & Gas Flow Equipment, HVAC, Material Handling & Storage

Lightweight Variable Output Pump has twin-cylinder design.

April 13, 2016

Designed for medical, instrumentation, and lab automation applications requiring variable output and low power consumption, 2110 series twin WOB-L® piston oil-less air compressor provides variable output through its brushless DC motor and motor controller design. Size of 3.53 x 2.21 x 3.00 in. allows use in various applications, and twin-cylinder design provides reliability with low vibration and quiet operation. This 0.85 lb pump features die cast aluminum component parts.<br /> Read More

Material Handling & Storage

Pulsation Dampeners help protect chemical feed systems.

April 12, 2016

Available in 9 volumetric sizes from 6.0&ndash;125.0 in.³, Pulsation Dampeners provide dampening effect of +2.5%, minimizing harmful shock waves and delivering continuous chemical dosage at injection point. Units have max pressure ratings of 250 psi for metallic models and 150 psi for plastics models operating at up to 70°F. Offered in molded Noryl®, PP, PVDF, or 316 Stainless Steel construction, dampeners come in ½, ¾, and 1 in. connection sizes with NPT, BSPT, Socket, Union, or Flange connections. Read More

Material Handling & Storage

Conveyor-Equipped Material Handling Equipment Keep Production Rolling

March 25, 2016

Louisville, KY - Verti-Lift presents a full line of scissor lift tables, turntables, and tilt tables with virtually any type of conveyors built in to optimize production, ergonomics and operator safety. The company works closely with distributors and system integrators to design, build and integrate their material handling equipment with ball transfer conveyors, gravity roller conveyors, heavy... Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

Electronic 2-Way NC Valves come in 7 mm cartridge package.

March 17, 2016

Compatible with air, gas, and fluids, SV series operate in temperatures up to 122°F and offer response time of <1 msec for accurate dosing of minute volumes. These direct actuating valves, featuring 700.0 coil resistance, draw 0.85 W typ, weigh  0.14 oz, and have expected life of >1 billion cycles. While wetted materials are of stainless steel, seal can be FKM or EPDM as standard or FFKM upon request. Minimized moving weight results in quiet operation with low vibration. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, HVAC, Material Handling & Storage, Green & Clean

Compressed Air Filters increase performance, energy efficiency.

March 11, 2016

Available for 20&ndash;500 scfm flows, compressed air filters deliver reliable compressed air quality with minimized pressure drop to help conserve energy. Products include liquid separator, particulate, coalescing, and oil vapor adsorbing filters. While particulate and coalescing filters feature deep pleated filter elements wrapped in stainless steel cages, vapor filters use carbon matting to prevent channeling, reduce pressure drop, and prevent particles from escaping. Read More

Controls & Controllers, Fluid & Gas Flow Equipment, HVAC, Material Handling & Storage

Air Flow Controller maintains constant system pressure.

February 12, 2016

Available for 250&ndash;18,000 scfm system capacities, Kaeser Flow Controller (KFC) creates effective storage by accumulating compressed air in receivers and only delivering air needed for production. System, responding to fluctuating demand, actively maintains constant system pressure downstream to help eliminate artificial demand and reduce air losses through leaks. Also, stored compressed air can be used to satisfy air demand spikes without pressure drop at point of use. Read More

HVAC, Material Handling & Storage, Materials & Material Processing, Safety & Security Equipment

Acoustic Panel Laminate cuts automotive noise and vibration.

December 22, 2015

Able to reduce automotive interior noise by over 2 dB, ShilohCore&trade; Acoustic Panel Laminate meets global demand for products that optimize noise and vibration damping without adding to overall weight. Proprietary formula allows for targeted patch coverage even in challenging vertical surface applications, without gap variation and with no need for clearance zones around mounting studs or assembly flanges. ShilohCore can be used with coated or uncoated steels, stainless steel, or aluminum. Read More

HVAC, Material Handling & Storage, Green & Clean

Portable Compressor delivers 210 cfm at 100 psig.

December 17, 2015

Designed for cross mounting on service vehicles, Mobilair&trade; M58 Utility is equipped with Tier 4 Final Kubota diesel engine, which is direct-coupled to energy-saving Sigma Profile&trade; airend. Long and short side forklift slots as well as single-point lifting bail facilitate mounting/dismounting, while 28-gallon fuel tank provides up to 10 full hours of operation. Housed in rugged steel cabinet with powder coating, rotary screw compressor operates in ambient temperatures up to 122°F. Read More

HVAC, Material Handling & Storage

Belt-Driven Air Compressor is available for Ford Transit.

December 14, 2015

With rated capacity of 30 cfm at 100 psi (150 psi max), UNDERHOOD LITE 100% duty cycle, VMAC, oil-injected, rotary screw air compressor system, available on Ford® Transit® 3.7L Ti-VCT V6 Van, mounts directly on engine and weighs 85 lb. Combined oil cooler and air/oil separator tank measures 17.5 x 8 x 19.75 in. (including oil filter), and other features include 2-speed throttle control (base and elevated idle), hour meter, and high idle speed adjustment. Various safety features are standard. Read More

Chemical Processing & Waste Management, HVAC, Material Handling & Storage

Fujitsu Launches New Warranty for Halcyon Mini-Splits

November 27, 2015

Effective earlier this year, Fujitsu Halcyon mini-split and HFI systems installed by licensed contractors, with submitted online registration, now have a 10-year parts and compressor warranty.  A twelve-year parts and compressor warranty is also available for Fujitsu Halcyon systems installed by an Elite contractor (with online registration).  All R22 and IAQ models are excluded.  ... Read More

Fluid & Gas Flow Equipment, HVAC, Material Handling & Storage

Air Compressor produces clean dry supply.

October 14, 2015

Capable of year-round operation, BLADE SE Quality Air Station delivers constant supply of clean, dry, compressed air. Components include BLADE Series compressor equipped with built-in, air-cooled aftercooler; intelligent moisture separator with auto-drain; built-in 1.0 micron prefilter; and refrigerated air dryer. For facilitated installation, 80 gal air receiver contains single-point piping connection. Rotary vane technology is used for operation at speeds down to 1,050 rpm. Read More

HVAC, Material Handling & Storage, Mechanical Components & Assemblies

Gas Driven Air Compressor is rated for 100% duty cycle.

October 8, 2015

Powered by Subaru EX40 14 hp gasoline OHC engine, RAPTAIR-G30 delivers continuous 30 cfm at 100 psi, tested to ASME standards. Gearless, clutchless drive system features auto-tensioned serpentine belt and aluminum belt guard, With WHASP tank technology, both air and oil are cooled, eliminating need for bulky accessories. Measuring 20.3 x 33.5 x 21 in., rotary screw compressor can mount with 4 bolts on top of side-pack of service body, creating space for additional tools and equipment. Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

Filter-Regulator-Lubricators offer extended temperature range.

September 25, 2015

Intended for broad range of air preparation applications, 652 Series offers extended high- and low-temperature capabilities from -40 to 80°C. Modular units feature manifold endplate flanges that allow technician to pull manifold assembly out of service without disconnecting piping. Available in 3 port sizes from ¼ to ½ in., 652 Series incorporates front-facing low-profile gauges and optional red/green pressure indicators that can be set to desired range. Read More

HVAC, Machinery & Machining Tools, Material Handling & Storage, Mechanical Power Transmission, Plant Furnishings & Accessories

Leading CNC Milling Machine Manufacturer Advanced Control Technology (ACT) Announces Heavy Discounts for its Best Selling Products

September 9, 2015

The premier manufacturer of most portable, versatile, advanced and affordable computer numerical control (CNC) milling machine in the world, DMC-III,  Advanced Control Technology (ACT) of Granada Hills, Canada, has just announced heavy discounts on its best selling products, most notably DMC-III and its concomitant components for further promotion of its already acclaimed products as part of... Read More

HVAC, Material Handling & Storage, Green & Clean

Booster Compressors range from 30-60 hp.

August 21, 2015

Supplied as complete, fully enclosed packages, DNC Booster Series delivers volumes from 109&ndash;695 cfm with pressures as high as 650 psig. Improved cooling flow ensures packages operate at optimal temperatures, while small component layout and wide opening doors make packages service-friendly. Combined with full complement of sensors, Sigma Control 2&trade; provides control and monitoring with optimized communications capabilities for seamless integration into remote plant control/monitoring systems. Read More

Material Handling & Storage

Equipment Pads are constructed of lightweight cellular concrete.

July 8, 2015

Supporting outdoor equipment, super lightweight equipment pads feature expanded polystyrene (EPS) core surrounded on 5 sides by fiber reinforced lightweight cellular concrete. Top surface with pebble texture keeps equipment from sliding, while 24&ndash;40 in. sizes with 2&ndash;2.5 in. thicknesses transfer weight evenly to soil or gravel below while also preventing standing water from forming below. Pads resist cracking/breaking, impact, bending, vibration, weathering, termite/chemical attack, and fire.<br /> Read More