Carts & Hand Trucks

Related Categories
Laboratory and Research Supplies & Equipment, Material Handling & Storage

Cleanroom Computer Carts are customizable to user's needs.

October 26, 2016

Made of stainless steel with continuous seam welding, and electropolished to create microscopically smooth surface, BioSafe® Cleanroom Computer Carts are easy to clean and disinfect, and are designed to resist collecting dust and other contaminants. Ergonomic, mobile workstations include slide-out shelf for keyboards and corrosion-resistant locking castors for maneuvering inside lab. Perforated monitor platforms and rod-based CPU cradles minimize surface area and promote laminar air flow. Read More

Material Handling & Storage

Reach Trucks feature integrated dual CANbus technology.

October 25, 2016

Offered in 7 models with 5 chassis options, Yale® MR14-25 Moving Mast Reach Trucks can be tailored to meet demands of most indoor applications. Heavy duty mast offers lifting heights up to 502 in. and speeds up to 143 fpm. Operating at max travel speed of 8.7 mph, truck is available with fully insulated cabin for cold storage applications. Integrated dual CANbus technology identifies operator error and malfunctions, helping to diagnose problems. Read More

Material Handling & Storage

Pneumatic Tire Lift Truck offers extensive options.

October 17, 2016

With over a trillion possible configurations, Model GP040-060MX offers customizable solution for indoor/outdoor applications in industries ranging from retail to distribution. PSI engine, available in LPG or dual fuel, provides extended service intervals and advanced diagnostics. Yale® Flex Performance Technology™ enables operator to tailor engine performance based on real-time demands, while Hi-Vis™2 mast and bar-on-edge overhead guard optimize visibility for precise load placement/retrieval. Read More

Material Handling & Storage

New Creform Kiting Cart feature four 3" dia. swivel casters for easy positioning and maneuverability.

October 14, 2016

Ensuring that painted parts are kept scratch-free and mar-free in the manufacturing environment, Kiting cart delivers parts from the paint room to an assembly area. Designed to hold small batches of parts on two sides of the cart, each of the shelf levels feature two cantilevered bars (pins) that extend out both sides of the cart to hold the parts. Cart is built with 28 mm pipe of 30” x 30” base along with 65” height, and a load capacity of 350 lb. Read More

Material Handling & Storage

Automatic Guided Carts feature PC-based control platform.

October 11, 2016

Consisting of standard burden carrier base with adaptable top to which different load handling devices can be added, Automatic Guided Carts feature Beckhoff CP7202 Panel PC with 15 in. touchscreen as system controller and user interface. Panel PC handles broad range of functionality including traffic management, vehicle task management, load tracking, user interface for system monitoring tools, and AGC fault finding/diagnostics. Onboard CX1010 Embedded PC handles all internal functions. Read More

Health, Medical and Dental Supplies & Equipment, Material Handling & Storage

Case Study: Hospital System Using Akro-Mils Products to Go Mobile

October 5, 2016

Akron, Ohio — Relocation of active departments in a medical facility is a daunting process. Materials managers at a Midwestern medical system — with multiple locations serving more than 1 million patients annually — discovered how challenging it can be as they moved departments as part of a construction project at the system’s main campus. A Massive Move A team led by the... Read More

Material Handling & Storage

'Switching Gears'...There's No Disconnect with this Tool Cart

October 3, 2016

Creform designs and builds an applications-specific tool cart for an electrical switchgear manufacturer Greer, SC—Creform Corporation has designed and built an applications-specific tool cart to support the production operations…machine setup and changeovers…of a switchgear manufacturer. Integral to the cart’s development was to optimize tool configurations and placement for both... Read More

Material Handling & Storage, Transportation Industry Products

Mining Haul Truck provides 400-ton capacity.

September 20, 2016

Powered by 18-cylinder, 3,500 hp Komatsu SSDA18V170 diesel engine, Model 980E-4 provides optimal match in large-scale mining applications with bucket shovels from 55-99 yd³, loading out in 3–5 passes, depending on bucket size and material density. AC electric drive system enables efficient operations in deep pit and soft underfoot operations. Engine comes with pre-lube system to help minimize wear during start-up, CENSE® on-board monitoring system, and ELIMINATOR® engine oil filtration system. Read More

Material Handling & Storage

Raymond Celebrates Continued Innovation with Anniversary

August 22, 2016

Company honors 65th anniversary of narrow aisle concept, Reach-Fork® Truck GREENE, N.Y. — The Raymond Corporation is celebrating the company’s continued innovation by commemorating the 65th anniversary of the Raymond Reach-Fork® truck. On Aug. 14, 1951, George Raymond Sr., Raymond’s founder, and Christian Gibson, an engineer at the company, received a U.S. patent for the power-driven... Read More

Material Handling & Storage, Waste Handling Equipment

Recycling Collection Cart features metal support base.

August 17, 2016

Equipped with powder-coated metal support base, MODRoto 50P-16S safely handles up to 500 lb of glass, metal, plastic, construction and demolition debris, and other recyclable materials. Support base joins rugged, rotationally molded, plastic bin above with 3 steel fork tubes below that allow entire cart to be raised, moved, rotated 180°, and dumped by forklift to minimize manual lifting, bending, and reaching. Cart is set on 6 industrial-strength, non-marking casters. Read More

Material Handling & Storage

Ergonomic Laundry Truck reduces worker effort and injury.

August 2, 2016

Reducing need for workers to repeatedly bend down, 25P-24 flare truck features steal spring-loaded, waterproof, and chemical-resistant plastic platform that automatically sinks when loaded with laundry and rises as laundry is removed. Rotomolded, 100% polyethylene, single-piece, ergonomic cart (66 x 35 x 31 in.) features safety roll-top rim around full cart perimeter, rounded corners, and internal spring platform guides. Six industrial-strength, non-marking casters facilitate mobility. Read More

Material Handling & Storage

Tilt Trucks nest fully assembled for shipping.

July 19, 2016

Available in 14 models, including 7 with forklift channels, Akro-Tilt Trucks enable one person to handle bulk, heavyweight jobs up to 2,000 lb. Units feature full frame design with steel under top rim, wide mouth and low profile to facilitate loading, and one-piece molded body that won't rust, dent, or chip. Fully welded and reinforced, powder-coated 13-gauge frame is optimized for automatic dumper applications, and is corrosion-resistant. As many as 4 trucks can stack on single pallet. Read More

Cleaning Products & Equipment, Material Handling & Storage

Compact Janitorial Cart carries everything needed for workday use.

July 11, 2016

Gator Compact Cart provides deep molded pockets, utility hooks, and accessible slots for storage of cleaning solutions, spray bottles, brooms, or anything custodial workers/housekeepers use while working. Removable, zippered, 25 gal, vinyl refuse bag conceals trash; handle slots secure mop handles in upright position; and molded-in area allows upright vacuum cleaner transport. Maneuverability is afforded via 8 in. fixed and 3 in. swivel, high-density, non-marking rubber wheels. Read More

Electrical Equipment & Systems, Material Handling & Storage

Xantrex Collaborates with Film and TV Industry Firm Involved in Vancouver Olympics and the Local NHL Team

June 30, 2016

BURNABY, BRITISH COLUMBIA, CANADA – Xantrex collaborates with HollyNorth, a Burnaby-based supplier to the film and entertainment industry, to create a Zamboni using a modified golf cart – a Fanboni, for the city’s National Hockey League (NHL) team. Capable of playing music and distributing T-shirts during tailgate parties, the Fanboni brought much excitement for the hockey fans and was... Read More

Material Handling & Storage

Tugged 4-Wheel Steer Carts create fork truck-free environment.

June 29, 2016

Used to deliver commodities along specific route on plant floor, Quad Steer Carts or Tracking Carts promote lean manufacturing and fork truck-free environment. These carts, primarily tugged or towed via vehicle, promote delivery time accuracy, safety, and production line efficacy. With all 4 wheels able to turn, radius of rear wheels follows front wheels to optimize cornering capability while also minimizing inside drift. Design also minimizes maintenance and repair requirements. Read More

Material Handling & Storage

Custom Fifth Wheel Carts offer inline towing.

June 28, 2016

Allowing for straight, inline towing and maneuvering of multiple carts in tight spaces or narrow warehouse aisles, Custom Fifth Wheel Carts let warehouse workers pick and load multiple orders in one location, maximizing productivity. Powder coated tow carts come in multiple height and deck sizes with load capacities of 1,000 lb or more. Custom deck sizes are available upon request to meet specific applications. Read More

Material Handling & Storage, Services, Test & Measuring Instruments

Elevator Ttest Weight Carts Used in Elevator Testing and Certification

June 27, 2016

MarsMetal engineers and manufactures elevator test weight carts which are a critical component in the testing and certification of elevators by specialized elevator service and repair companies. Elevator testing to North American standards (CSA B44.1/ASME A17.5) is crucial in ensuring the safety of the elevators that we take for granted in our daily lives and use without thought or worry.... Read More

Material Handling & Storage

Sit-Down Counterbalanced Truck combines ergonomics, performance.

June 9, 2016

Model 4750 features open view mast design and integral sideshift on 4,000 and 5,000 lb trucks with 3-stage mast and full free lift. For ergonomics, such features as left- and right-side entry, full-suspension seat with 4-way adjustability, and tilt steering wheel are complemented by low step height and foot-activated parking brake. Maintenance is facilitated by compartmentalization, ability to check brake fluid levels from dashboard, and removable no-tool floorboard for hydraulic tank access. Read More

Material Handling & Storage

Hand Pallet Truck are designated as Legal for Trade.

May 19, 2016

To maximize efficiency in large-scale delivery/distribution/pharmaceutical applications and increase flexibility of warehouse/delivery operations, legal for trade (LFT) hand pallet truck uses 4 certified load cells to generate data with percentage of error of 1 lb for loads up to 3,000 lb and 2 lb for loads from 3,000–5,000 lb. Design with onboard thermal printer, quick lift pump, and exchangeable/rechargeable battery facilitates movement between docks, and available functions include gross net weighing, automatic/manual tare, totaling with sequence of loads, and piece counting. Read More

Electrical Equipment & Systems, Material Handling & Storage

Automatic Battery Charger keeps golf carts ready to go.

May 16, 2016

Compatible with various 36 and 48 V golf cart models, GC-1000 can begin charge cycle with batteries as low as 2 V. Red, yellow, and green LED lights indicate charging status, and float feature allows batteries to maintain full charge at end of charge cycle. Overload protection is standard, and charging is interrupted if maximum temperature is exceeded to protect batteries from over temperature and thermal runaway. Carrying handle facilitates transport. Read More