Birchwood Casey    Eden Prairie, MN 55344 2138
Mar 30, 2012 Near-Zero(TM) Water Recycling System is designed for TRU TEMP process lines up to 150 gal in tank size and is pre-engineered for fast setup. System allows the user to recycle and re-use water in rinse tanks for one month, after which filter media needs to be changed and rinse tanks changed and re-filled with clean water. Whether installed on new process line or added as retrofit, system is useful in installations where normal water and city sewer services are not easily accessed.

Clip Strip Corp.    Hackensack, NJ 07601
Mar 30, 2012 Powder-coated (off-white) to remain free of rust, Free-Standing Snack Racks feature all-steel construction with welded, genuine coil-spring steel clips for trouble-free, extended service in retail environments. Racks allow product to be loaded onto front and/or back and offers 28 clips on 2-wand version and 42 clips on 3-wand version; top 2 clips serve as sign holder. Units ship flat, and merchandise loading can begin after display frame is inserted into base.

Marken    Uniondale, NY 11556
Mar 30, 2012 Offered in 5, 9, and 15 kg volumetric weight sizes, BioSystem(TM) protects and ensures integrity of clinical trials specimens throughout temperature controlled chain while standardizing box dimensions for optimum freight costs and dry ice use. Each size is rated to keep biological products frozen for 72 hr or more and engineered to be environmentally friendly. Validated to conform to ISTA 7E enhanced protocol, containers are regionally IATA PI620 approved for biological specimen transport.

Meissner Filtration Products, Inc.    Camarillo, CA 93012 8760
Mar 29, 2012 QuaDrum(TM) rigid outer containers are designed as square alternative to industry-standard cylindrical drums. While footprint maximizes floor space utilization, squared base promotes stability and facilitates accurate and repeatable deployment of compatible 3D TepoFlex® single-use biocontainer assemblies. Also available, optional stainless steel dolly enables intra-facility mobility.

Anver Corp. - Anver.Com    Hudson, MA 01749
Mar 29, 2012 As combination lifter, tilter, and rotator, Anver Vacuum Lifter-Flipper permits one person to remove large item from mold, upend it, and rotate it 360°. Offset beam has suction cups for gripping tub-like item from inside and is powered for flipping it 180° for placement onto table or another process. Custom built to match user requirements, system can be powered by 115 Vac or compressed air. It eliminates straps and hooks that can damage surfaces.

Clip Strip Corp.    Hackensack, NJ 07601
Mar 29, 2012 SIGN FRAMES come in sizes from 3½ x 5 in. to 11 x 14 in. Frames combine with various components - stems, stem mounts, magnetic bases, flat bases - to create wide varitey of sign holder configurations: Flat Shovel Base, Center Stem Base, Center Base, Magnetic Stem Base, Under the Shelf Mount, Wall Mount, and more. Regardless of size, individual sign holder frames use same system components, and sign sizes/orientation can be changed in seconds.

Clip Strip Corp.    Hackensack, NJ 07601
Mar 29, 2012 Shelf-edge channel systems are used to identify, describe, and price merchandise on shelves and may also be used for promotional signage. Offered in clear or white styrene plastic, there are 2 peel-and-stick pricing solutions: heavy duty C-channels measuring 1¼ x 48 in. or 3 x 48 in., and 1¼ x 48 in. Econo C-Channels for straight corner shelf edges. Label and sign channel holder snaps into 1¼ in. gondola metal shelving. Clear outer flap protects against dust and dirt.

Bud Industries, Inc.    Willoughby, OH 44094
Mar 28, 2012 Offering open construction and removable door to aid hardware upgrades and maintenance, Swing Frame Rack combines wall-mounted rack functionality with swing-out frame. Product can be hinged left or right and provides storage for networking equipment. With 75 lb load capacity, each unit accepts No. 12-24 panel mounting hardware and mounts on 16 in. hole centers in back for stability. Frames come in 21 and 35 in. panel space heights and mount to 18 in. depth.

Parameter Generation & Control    Black Mountain, NC 28711
Mar 28, 2012 With rooms and chambers mapped and validated for US FDA-mandated long- and short-term shelf life studies under various temperature and humidity requirements, Parameter Stability Storage in Wilson, NC features -20°C freezers that provide tight overall chamber uniformity of ±0.85°C. Freezers can remain in International Conference on Harmonisation (ICH) uniformity specification even while running defrost cycles. Also, facility has added 2 new temperature and relative humidity rooms.

ABB Robotics, Inc.    Auburn Hills, MI 48326
Mar 27, 2012 Available for high-speed bag palletizing or compact end-of-line case palletizing, PalletPack 460 function package consists of IRB 460 palletizing robot, Flex-Gripper EOAT, control PLC, Jokab safety PLC, PalletWare support software, user documentation, and FlexPendant graphical HMI. The 4-axis IRB 460 features 2.4 m reach and 110 kg capacity, and streamlined programming wizard does not require PLC programmers to have specific robotic experience.

Ergodyne Corp.    St. Paul, MN 55108
Mar 27, 2012 Made of 400 x 400 denier black polyester with PU backing for protection against rain, SHAX® 6094 Tent Weight Bags have funnel design that allows workers to fill opening with up to 40 lb of sand or dirt using any jobsite shovel. Units use differentiating drawstring for secure closure and feature handle at top for worker transport once filled.

Novatec, Inc.    Baltimore, MD 21225
Mar 26, 2012 Intended for use by plastics processors, GS Vacuum Loader comes standard with brushless motor and operates in upright position. Magnet-backed control can be left on side of loader or attached to 10 ft long pendant (included) and attached on side of material hopper. Control features load time, no-load alarm, alarm light, and silencer as well as proportioning and purging. Also included, GS sequential Micro-Burst blasts of air keep internal filter from becoming clogged.

Schunk    Morrisville, NC 27560
Mar 26, 2012 With multi-tooth guidance and aluminum housing, PZH-plus is suited for use where components of different sizes have to be alternately handled. Monitoring using magnetic field or inductive sensors is optional, and large center bore size allows installation of camera, feed-through of material, or gripping of long workpieces. Weighing 1.6-33 kg, gripper offers 20-75 mm max stroke per finger, 250-3,800 N gripping force, and ID/OD gripping capability for workpieces weighing up to 19.3 kg.

Proper Storage Systems, Inc.    Seguin, TX 78155
Mar 26, 2012 With custom fabricated cradling and blocking, Roll-Out Shelving Racks enable users to store and access odd-shaped and heavy items. Hardwood or UHMW cradling helps save space and simplify handling, whether storing cylinders, wheels, dies, or tooling. Cradling and blocking can be fixed or adjustable and will be customized to fit exact needs.

Pentair, Inc.    Golden Valley, MN 55416
Mar 23, 2012 Used for mounting, housing, and protecting 19 or 23 in. rack equipment, Hoffman(TM) brand MAXRACK(TM) racks feature internal channel cable tie-down points that secure cables while avoiding stress points. Side openings accommodate through-rack cable passage, and max static load capacity is 2,500 lb. To maintain proper bend radius and easy organization of network cables, rack also includes internal and external cable arcs. Integrated air baffle maximizes airflow of network switches.

TricorBraun    St. Louis, MO 63141
Mar 22, 2012 Scoop Neck(TM) system keeps dispensing scoop resting in container's neck to prevent scoop from being sucked down into powdered product container. Design does not require additional plastic and will not interfere with use of existing sealing materials. Moisture-absorbing scoop may be made DryKeep(TM) desiccant, and desiccant scoops are made with pharmaceutical grade PP for consumer products. DryKeep scoops are compliant with FDA GRAS and Code of Federal Regulations 21.

Ergodyne Corp.    St. Paul, MN 55108
Mar 21, 2012 Made from BPA-free Tritan(TM) plastic, Chill-Its® 5151 Water Bottle carries up to 1 L of fluid while resisting impact, odor, high heat, humidity, and aggressive cleaning detergents. Bottle has wide mouth to fit ice cubes and screw lid with loop for carabiner use. Offered in orange, gray, and lime, dishwasher safe water bottle is suited for indoor and outdoor workers who battle heat and fatigue on the job.

Schroeder Industries LLC    Leetsdale, PA 15056-1025
Mar 20, 2012 Available in 12 and 18 gal sizes, Model TNK features integrated baffle wall, which creates settling zone for oil to de-gas and cool, allowing air to exit fluid before it enters hydraulic circuit. Basic model contains return line filter, air breather with filler strainer, suction line connection, and G ½ in. drain port, while expanded model contains return line filter, air breather with filler strainer, suction filter, 2 additional return line connections, G ½ in. drain plug, and fluid level indicator.

LM-76 Linear Bearings    East Longmeadow, MA 01028
Mar 20, 2012 Offering out-of-the box/off-the-shelf linear motion solution for those who have single- or multi-axis applications, Basic Slides come in 3 sizes - BS6, BS8, and BS12 - respectively designed around 6, 8, and 12 mm shafting. All sizes feature steel linear ball bearings, while 8 and 12 mm versions have option of employing LM76 Minuteman PTFE, self-lubricating bearings. Each product also supports option for 2 carriage block sizes: 2-bearing short block and 4-bearing long block.

U-Teck    Safety Harbor, FL 34695
Mar 20, 2012 Equipped with universal tether, Rung Runner(TM) Ladder Caddy enables workers to transport ladders of all types and sizes to and from job sites. Design cradles ladders on their side to off-set nearly 90% of ladder's weight, minimizing worker fatigue and helping to prevent injuries. Constructed of lightweight polymer and stainless steel, Rung Runner has been approved for use by telecommunications companies.