Terso Solutions, Inc.    Madison, WI 53711
Oct 08, 2010 With temperature range of -20 to -40°F and 9.7 ft³ of storage space, RFID-enabled freezer provides inventory management features and is suited for use in hospitals, research labs, manufacturerin facilities, and crime labs. It protects high-value products - reagents, bio-samples, biologics, tissue samples, adhesives - and employs RFID technology for capturing inventory transactions at item level. Freezer also monitors temperature and expiration dates and can trigger alarms for open doors.

TricorBraun    St. Louis, MO 63141
Oct 07, 2010 Essential to delivery and dosing, DryKeep moisture-absorbing scoops ensure humidity inside powder containers remains stable via controlled absorption. Sizes range from 0.5 cc to 16 oz, and several configurations accommodate proper dosing and protection needs of consumer powders and chemicals. Made with DryKeep and pharmaceutical grade PP, product complies with FDA GRAS and Code of Federal Regulations Title 21. It also meets pharmaceutical purity standards for US, Europe, and Japan.

Akro-Mils, A Myers Industries Co.    Akron, OH 44301
Oct 07, 2010 Made from autoclavable polycarbonate and available in 4 sizes, InSight(TM) Ultra Clear Bins feature lock-in-place design that optimizes storage space by allowing bins to be securely stacked, even with lids in place. Molded rear hanger lip hooks bins onto rails or louvered panels for added versatility. With clear length and width dividers, users can create customizable compartment sizes. Bins also include label area for part identification and bar code scanning.

BrandTech Scientific, Inc.    Essex, CT 06426
Oct 06, 2010 VITLAB® light-shielding volumetric flasks are made of pigmented polymethyl pentene plastic that absorbs light, particularly in UV range below 280 nm and upper Vis range above 580 nm, while providing sufficient translucency to verify contents/volume. Providing sunlight protection factor of nearly 20, break-resistant flasks offer alternative to glass and come in 10-1,000 mL sizes. All accommodate screw-on caps that help protect contents, and all volumes are Class A per DIN EN ISO 1042.

Schneider Packaging Equipment Co., Inc.    Brewerton, NY 13029 0890
Oct 05, 2010 Severe Duty line of robotic palletizers feature FANUC robotic arm with jacket that allows encapsulated warm air to circulate around arm when operating in low temperature environments down to -20°F. Accommodating various product types, weights, and sizes, system builds loads in interlocked, brick, spiral, or column patterns. Multiple configurations are available including single station 1-in-1-out, dual station 1 or 2-in-2-out, 1 or 3-in-3-out, 1 or 4-in-4-out, and as Robox style palletizing system.

General Pipe Cleaners    McKees Rocks, PA 15136
Oct 04, 2010 Closet Auger Bags contain wet augers when carrying through homes, hospitals, or offices. Wide mouth end and heavy-duty zipper to make retrieval and storage of pipe cleaning augers easier. Three vent holes in bags enable auger to dry between jobs, and shoulder strap enables users to carry other tools. Bags hold Flexicore® 3 ft Closet Auger with 2 layers of tempered spring steel coiled over core of 49-strand wire rope, or 6 ft Teletube® Flexicore Closet Auger with 3 extra ft of cable inside guide tube.

IntelLiDrives Inc.    Philadelphia, PA 19152
Oct 01, 2010 Featuring anodized aluminum body with pre-loaded ball bearings, Model RTHM-153 rotates optical components and small tooling in confined spaces, such as laser cavities and disk texturing machines. Precision ground worm gear produces consistent driving torque to rotor and eliminates variations in motor current. Equipped with reference home sensor, stage features angular resolution up to 0.2 arc-sec, which may be achieved from DC Servo or stepper motor controls.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Sep 30, 2010 CoroMill 325 Thread Whirling Inserts and Holders enable threading of long, slender components in difficult-to-machine materials. By combining thread whirling with rigidity of sliding head machine, complete threads are produced accurately in single pass, without need for special supports. Inserts and holders fit variety of sliding head machine types and can produce wide range of high-precision screws and implants from rough stock.

Pierce Arrow, Inc.    Henrietta, TX 76365
Sep 30, 2010 Pierce PS4000 winch operates at 19.8 fpm with 1.5 hp, drawing 310 A under full load. Weighing 55 lb, it includes 40 ft of ¼ in. cable, handle bar switch, compact solenoid, hook, roller guide, and universal mounting plate.

Savi Technology    Sunnyvale, CA 94089
Sep 30, 2010 Portable In-Transit Tracking Unit (PITU) can switch from satellite or terrestrial wireless systems to continuously monitor location and condition of shipments anywhere and at anytime. Specifically, it connects communications among RFID devices, GPS location and SatCom systems, global cellular networks, and sensors that detect environmental and security changes. Unit beams real-time information to Savi SmartChain(TM) software platform for managing assets, shipments, and consignments.

Raymond Corporation, The    Greene, NY 13778 0130
Sep 30, 2010 Providing 3,000-5,000 lb load capacities, Models 4150 and 4250 are available with ComfortStance suspension and cushioned floor mat to isolate operators from impact and vibration. Suspension, standard on Model 4250 and optional on Model 4150, adapts automatically to each operator's weight. Powered by Raymond's ACR System(TM), 3-wheel stand-up trucks feature dual-steer-wheel design that allows one wheel to counter-rotate during turns for short turn radius.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Sep 29, 2010 Occupying 0.67 m² footprint suited for space-constricted environments, SK 21 and SK 24 operate at noise levels of 64 or 65 dB(A) and produce free-air delivery of 1.8 or 2.2 m³/min at 8 bar. Compressors incorporate 11 or 15 kW CEMEP EFF1 motor and feature flow-optimised Sigma Profile airend. While V-belt drive design features automatic tensioning device that ensures constant and efficient power transmission, cooling system enables low compressed air discharge temperatures.

Anver Corp. - Anver.Com    Hudson, MA 01749
Sep 29, 2010 Anver ETL Series vacuum lifter-tilter features 115 Vac electric or pneumatic actuator for tilt mechanism, removable pendant control for up/down and powered tilt, can be rotated manually, and includes locking pin. Device uses dry pump vacuum system rather than hydraulics for lifting steel, plastic, and fiber-glass loads. Product allows one person to lift and position parts up to 2,000 lb. It can also be equipped with suction cups made from variety of special-purpose materials.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Sep 29, 2010 To meet demands of applications such as production of PET containers, N-series can raise pressure of standard works air from 5-13 bar to 45 bar max. Reciprocating compressors are offered in 2- or 3-cylinder versions with rated power ranges of 7.5-18.5 and 2.2-45 kW, operational speeds from 760-1,300 rpm, and delivery capacities from 4.7-14.4 m³/min. While manual belt drive tensioning is availabel on 2-cylinder versions, automatic belt tensioning is standard on 3-cylinder versions.

Bilsing Automation North America    Clinton Township, MI 48036
Sep 29, 2010 Based upon modular tooling design, Series 16 Grippers are used primarily for handling small and mid-sized parts in 2-4 lb range, as well as for multi-cavity molds in plastic injection molding, packaging, and other industries. Manufactured from aluminum, Series offers variety of off-the-shelf components in various sizes, allowing tooling solutions to be configured for each customer's specific application.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Sep 28, 2010 Supplied with soundproof enclosure, Airbox and Airbox Center provide air deliveries from 0.25-0.9 m³/min with motor powers from 2.4-7.5 kW. Airbox models are available with 5 motor powers and choice of 2 package sizes. Each unit features dry-running, directly coupled KCT reciprocating compressor powered by eff 1-rated drive motor. Airbox Centers, as turnkey compressed air supply solutions, also provide application-tailored compressed air treatment and storage.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Sep 28, 2010 Intended for dental practices, clinics, and laboratories, Airbox Dental models deliver 250-900 Lpm, 5 motor power ratings from 2.4-7.5 kW, and 2 package sizes. Dry-running, directly coupled KCT reciprocating compressor is powered by eff 1-rated drive motor, and airflow design allows 100% duty cycles and dependable operation in ambient temperatures up to 45°C. As turnkey, all-in-one solution, Airbox Center Dental also provides application-tailored compressed air treatment and storage.

Yale Materials Handling Corp.    Greenville, NC 27834
Sep 28, 2010 For applications that demand strength beyond composite handle capabilities, Cast Aluminum Control Handle features ribs that ensure rigidity and stiffness. Construction is solid at corners; ergonomic hand grips promote operator comfort; and oversized handle tube lends to durability. To upgrade existing trucks, conversion kits are available that include cast aluminum lower handle half, 2 x 2 in. handle tube weldment, gas return spring, creep speed switch cover, and mounting hardware.

RNR Plastics, Inc.    Raynham, MA 02767
Sep 28, 2010 Made from clear PVC in custom configurations, RNR Removable Adhesive Pouches feature chemically designed, pressure sensitive adhesive that enables removal from product without leaving residue. This eliminates need for detergents, solvents, and cleaning prior to painting, powder coating, or other processes. Suitable for diverse applications, sizes can conform to curved optics, electronic chassis, instrumentation, as well as odd-sized parts.

AERCO International, Inc.    Northvale, NJ 07647
Sep 28, 2010 Available in 210, 340, and 505 gal capacities, Domestic Water Storage Tanks are designed for use with water heaters that provide immediate hot water at peak demands. ASME-certified units promote stable temperature control for potable water applications. Made of steel, tanks have glass-lined, wear-resistant interior surface that minimizes effects of hot water storage up to 180°F. Replaceable, sacrificial magnesium anode rods help protect tank and extend tank life.