Schlitter Tool, Inc.    Warren, MI 48093 6036
Aug 23, 2002 Ultimate G Style shave tool holder has dovetail float mechanism, hardened and ground dovetail slide, and tapered gib. Dovetail float mechanism, with more bearing surface than original pin style holders, reduces chatter. Holder has replaceable tool post that can be removed without having to remove shave tool holder or altering setup at machine. Tool posts are available for standard dovetail tools or HSS and super carbide insert type tools.

Leidemaul Ltd.    Rockford, IL 61104
Aug 22, 2002 EasyLinearâ„¢ linear motion products include Round Way and Profiled Rail Ball Slides, as well as Teflon Composite Slides. Ball slides are suitable for high-speed and positioning applications. Teflon Composite slides are suitable for rugged environments.

Magnetic Corporation    Olney, IL 62450 9749
Aug 22, 2002 TELEMAG telescopic columns raise and lower medical equipment, industrial devices, and work-place furniture with large offset loads. Columns can be powered by ac, dc, or 3-phase current. Maximum push force is 4000 N at speeds up to 1 in./sec. Minimum retracted height is 345 mm and maximum stroke length is 700 mm. Systems are available in 2 or 3 section models. Options include control units, operating elements, and maintenance-free actuators.

Columbia Machine Inc.    Vancouver, WA 98661
Aug 21, 2002 Palletizer/Conveyor customizes loads for retailers who want specific, end-of-aisle product displays. Controls can be adapted to both floor-level and high-level palletizers to enable column-stacking capabilities. When placed at aisle ends in retail outlets, display stacks make it easy for consumers to pick specific products without having to move other cases in load.

Anver Corp. - Anver.Com    Hudson, MA 01749 3214
Aug 21, 2002 Available in air-, electric-, and battery-powered configurations, Two-Pad Air Powered Vacuum Lifter handles loads up to 500 lbs. Designed for use with air balancer or electric hoist, it offers integrated air balancer controls and integrated up/down and release handlebar controls. Additional offerings include all-welded steel construction, vacuum packs, alarm systems, and vacuum pads.

Hyster Co.    Greenville, NC 27834
Aug 21, 2002 W45Z and W40Z weigh 4500 and 4000 lb, respectively, and have 24 V electrical systems. Bottom-mounted handle enables ergonomic actuation when moving products in tight spots, such as trailers. Speed button, on back of handle, allows operator to actuate truck using thumb with handle in fully raised position. W40Z offers optional 110 Vac charging for smaller retail applications. Built-in hinged convenience tray provides ventilation to protect work environment from battery gases.

Hyster Co.    Greenville, NC 27834
Aug 21, 2002 E30-40HSD 3-wheel Electric StandDrive(TM) Counterbalanced lift truck allows for instant operator access to electrical apparatus, lift pump, drive motors, and power steering assembly. Ultima(TM) Control Handle allows for intuitive movement and simultaneous travel, hoist and one auxiliary function. It works in conjunction with operator display for set-up of traction and hydraulic functions, and is controlled via software for smooth transitions between moves.

FKI Logistex North America    St. Louis, MO 63132 3207
Aug 20, 2002 Pallet Load Stacker allows for automatic inline stacking of full or partial pallet loads. Tubular steel frame construction enables individual pallet loads to pass through or be lifted and held to be stacked on other pallet loads in automated unit load handling system. Stacker features 1 min stacking cycle, floor-accessible drive, and 4-corner chain lift design, which eliminates need for hydraulics.

Norma Products, Inc.    Wixom, MI 48393
Aug 20, 2002 Mechanically interlocked NORMACLAMP® GBS M, made of lightweight aluminum-zinc, has rounded edges to minimize hose abrasion. It is offered in 4 bandwidths, with diameters ranging from 1 to 6 in. in increments of 1/4 in. Diameters up to 10 in. are also available. No Chromium VI is used in manufacturing of clamp or hex bolt. Clamp is used to contain high pressure or suction in municipal applications and in heavy construction, agricultural, and irrigation equipment.

Label-Aire Inc.    Fullerton, CA 92833
Aug 19, 2002 Model 3138 includes multi-line digital display with clear and complete error messaging, keypad entry, multi-page memory, and standard velocity compensation, which results in accurate label placement through changes in product speed. Stainless steel and anodized aluminum construction is corrosion resistant for operation in hostile environments. Unit is offered in variety of stroke lengths and is compatible with OEM printers.

Thales Computers Corp.    Raleigh, NC 27610
Aug 19, 2002 RA2064x 19 in. Airborne VME Rack is convection-cooled with operating temperature of -40°F to +169°F. Front panel has output voltage indicators (+5V, +12V, -12V, +3.3V), on-off switch, and access to 2 internal SCSI 3 1/2 in. disk drives and Flash solid-state drive. Rear panel includes MIL-C-38999 power connector and provides access to 4-slot VME64x backplane. Rack meets RTCA/DO-160D standard for avionics equipment and can be used in pressurized cabin.

Alemite Corporation    Charlotte, NC 28226 3515
Aug 19, 2002 ACCU-GUARD II Compact controls up to 6 products to 6 dispensing points, and can be programmed for quarts, gallons, or liters. It controls tank totals and reorder levels, providing stock inventory with ±1% accuracy. Alphanumeric controller gives user choice of specifying entry options according to job, registration, vehicle ID or fleet number. System prints receipt for every transaction from its ticket printer or other RS232 compatible printer.

ITW Ransburg Electrostatic Systems    Toledo, OH 43697 0913
Aug 16, 2002 Aerobell 33 9040 system has rotary atomizer with radial fluid manifold, quick-change fluid valves, control unit, and quick-change turbine. Compact package is suitable for single bell/single power supply applications requiring minimal space, or upgrading of automatic gun systems.

Neptune Chemical Pump Co., Div. Of R.A. Industries, Inc.    Lansdale, PA 19446 0247
Aug 16, 2002 Custom systems can be designed to include any metering pumps, tanks, portable mixers and control panels, along with instruments and piping specialties. Units are fully piped, wired, and tested. Piping is available in all materials, threaded or welded. Systems are packaged with tanks on board and include space for semi-bulk containers or totes. They offer feed rates from 0.02 to 300 gph at pressures to 3500 psi.

Lincoln Electric Company, Inc., The    Cleveland, OH 44117
Aug 16, 2002 Push-pull wire feeding guns handle steel and aluminum wire from .030 to 1/16 in. CobraMax fixed gooseneck is rated 150 A at 100% duty cycle. It features flip-up drive roll cover and quick wire-release lever. Standard Python torch is air cooled and rated at 200 A at 100% duty cycle. Replaceable gooseneck can be interchanged with full water-cooled barrel and gas cup combination, to achieve rating of 400 amps, 100% duty cycle. Both inlcude 3-turn, finger-tip, wire-speed adjustment.

Lincoln Electric Company, Inc., The    Cleveland, OH 44117
Aug 16, 2002 LN-15, with impact- and abrasion-resistant, ABS plastic case, is surrounded by full metal roll cage, made from aluminum alloy tubing. Across the Arc model has built-in contactor. Control Cable model is capable of Surface Tension Transfer® welding. LN-15 is designed for MIG and flux-cored processes using .023 to 1/16 in. solid wire or .035 to 5/54 in. flux-cored wire, at feed speeds of 50-700 ipm. Feeder includes internal, adjustable flow meter.

Hassia USA    Morganville, NJ 07751
Aug 16, 2002 A+F KR 180 PA Arctic Palletizer needs no protective wrappings, yet can work at temperatures down to -30°C, with its hand-held control panel remaining fully functional. Unit allows palletizing of cases of frozen food without loss of quality due to temperature fluctuations in freezer room or warehouse. Since no heat is generated in robotic arm, formation of ice on frozen goods is avoided.

Thern, Inc.    Winona, MN 55987
Aug 16, 2002 Power Winch controls chute elevation and extension. Limit switches and brake motors also provide load control. Conveyor systems are made more versatile by cable and winch arrangement that lets power winch be mounted in easily accessible place, away from hard-to-reach load. Multi-part rigging increases leverage and reduces load on winch.

DJ Products, Inc.    Little Falls, MN 56345
Aug 16, 2002 WeightCaddy lifts and maneuvers heavy weights, dies, and equipment up to 2500 lbs. Variable speed thumb twist grips allow operator to travel at speeds of 0 to 3 mph forward or backward. Unit can run entire shift on one charge, and can be customized to lift and maneuver different applications.

Key Technology, Inc.    Walla Walla, WA 99362
Aug 16, 2002 Prism2 on-belt sorter features automatic belt tensioning function. Built-in graphical user interface and control module is available on right or left side of machine. Sealed body protects electronic components in wet production environment. Smart Shaker(TM) technologies make up suite of conveying products designed to make Iso-Flo Vibratory Conveyors more self-adjusting, self-diagnosing, and capable of communicating with other processing systems.