Synario Design Automation Div., Data I/O Corp.    Redmond, WA 98073 9746
Sep 24, 2002 Portable TF20 Tray Feeder incorporates electronically controlled drive systems to enable feeder to safely handle thick or thin JEDEC or IEC trays. Automatic tray exchange is controlled by host machine is less than 5 sec. Trays are fed from stack to pick position and returned once devices have been programmed. Tray replenishment is achieved during machine’s TAKT time.

Industrial Metal Products Corp.    Lansing, MI 48901
Sep 23, 2002 Microstar Microfinisher is independently controlled, mounts to any lathe or grinder, and is available in 115 or 250 Vac versions. It uses abrasive film, backed by oscillating platen in contact with workpiece. Abrasive film, available in range of grades and standard 2, 4, and 8 in. widths, is automatically indexed from 150 ft roll and can move in either direction without clutch, gearing, or electrical changes. Film speed from 0-8 ipm assures precise finish control.

Akro-Mils, A Div. Of Myers Industries, Inc.    Akron, OH 44301
Sep 23, 2002 AkroClean provides upright vacuum holder molded into its base and contoured shape. During transport, cart's textured surface platform prevents buckets/containers from shifting. Its moisture dam keeps liquids away from vacuum area, while molded slots secure cleaning tool handles. Cart offers structural web foam plastic construction. Its two, 8 in. wheels and two, 3 in. plate style swivel casters are constructed of non-marking, high-density rubber compound.

Enerpac (Industrial Tools)    Milwaukee, WI 53201 3241
Sep 23, 2002 Hydraulic Swing Cylinders are available in capacities ranging from 300 to 7,600 lbs of force with strokes ranging from 1/2 to 1 7/8 in. They are offered in Buna-N and Polyurethane as well as Viton® for high temperatures or use in severe environments. Treatment on outside of cylinder bodies prevents surface corrosion for extended periods, and stands up to coolant and cutting fluids. Seal enables use of low pressure hydraulics without external leakage.

PHD, Inc.    Fort Wayne, IN 46899
Sep 20, 2002 Series SM Slide is available in 8, 12, 16, 25, and 32 mm bore sizes, with choice of 3 travel lengths. Slides provide smooth linear motion at 2x thrust of single bore cylinder. Optional porting through guide shafts allow saddle to move without flexing incoming air. All units are ready for 8 mm proximity switch. External mounting kits prevent flexing of electrical connectors. Slide is available in imperial and metric versions.

Durr Environmental, Inc.    Wixom, MI 48393
Sep 20, 2002 Overhead Transfer Cart (OTC) suits floor automation systems where clients want to maintain open aisle way for pedestrians, operators, maintenance personnel, and equipment. OTC can be used as alternative method of transfer to that of the Rail Guided Vehicle (RGV). It can be equipped with various conveyor cross sections, safety options, handheld pendant, and fixed- or variable-speed drives.

Airtrol Components Inc.    New Berlin, WI 53146 2107
Sep 20, 2002 Non-electrical, air-valve switch has adjustable setpoint with up to 10 turns of resolution. Valves can be ordered as normally open or normally closed, and pilot actuation can be pressure or vacuum. Switch is suitable for applications that require intrinsic safety, pneumatic sequencing, and precise pressure relief. Four mounting styles are available.

Norma Products, Inc.    Wixom, MI 48393
Sep 20, 2002 RLGU pipe clamps are made of lightweight aluminum-zinc with 12 mm band width in loop configuration. They are suitable for securing ducts, hoses, cables, and wiring harnesses, as well as pipes. For applications requiring dampening of noise and vibration, such as automotive and heavy truck, clamps can be ordered with rubber sleeve.

Advance Lifts, Inc.    St. Charles, IL 60174
Sep 20, 2002 Top of ground dock lift has 6 ft wide x 8 ft long safety tread steel deck, 18 x 60 in. hinged transfer bridge, and 60 in. wide x 36 in. long hinged chock approach ramp. Lifting capacity is 5000 lbs with 6.25 in. lowered height and 54 in. vertical travel. Lift includes removable safety hand rails, safety restraint chains, and bridge lifting chain. Five HP electric hydraulic power unit is prewired and mounted on lift.

Hunter Products Inc.    Bridgewater, NJ 08807-1802
Sep 20, 2002 Carbitron 300 consists of adjustable power supply and vibration hand tool. Tungsten-Carbide deposition layer forms true metallic bond with work surface with hardness of 78-80 Rockwell C. Thickness of deposition layer is controlled by discharge intensity selector on power supply and may be varied from 0.0002 to 0.001 in. in increments of 0.0002 in. Process protects wear surfaces, and improves thermal-shock and impact resistance of surfaces.

Spraymation, Inc.    Fort Lauderdale, FL 33309-6314
Sep 20, 2002 Mid-Size Electromatic XXXIV applies sprayed patterns in diameters from ¼ to 12 in. wide. Applicator head produces spray patterns ranging from fine mist to heavy wet coat by mixing air and fluid as it leaves spray head. All wetted parts are stainless steel with only one moving part containing no seals or packings. Internal 24 Vdc or 120 Vac solenoid coil eliminates need for additional valves and may be operated by PLC.

Clyde Materials Handling Inc.    Milford, OH 45150
Sep 20, 2002 Spheri Valveâ„¢ permits unrestricted flow of bulk materials and minimizes possibility of material build-up within valve body. Inflatable seal automatically deflates during opening/closing. Quarter turn moves valve from fully closed to fully open position. Valve is suitable for fine grain and hard abrasive products. Available in sizes from 2 to 20 in., it handles pressures to 435 psi and material temperatures from -4 to +900°F.

Advance Storage Products Div., JCM Industries Inc.    Huntington Beach, CA 92649
Sep 20, 2002 Full support, level-cart pushback system can store pallets that have been damaged, pallets with no bottom boards, 9-legged pallets, and pallets ranging in size from 30 to 72 in. It is available in 4-strut, wire-deck, and diamond-plate models.

Goldco Industries, Inc.    Appleton, WI 54915
Sep 19, 2002 Whisper Side Flow Air Conveyanceâ„¢ can run mix of 28 and 38 mm container neck-finish sizes and geometries at production speeds over 1,000 BPM. Pre-programmed product recipes ensure quick repeatable start-up after reformatting for different products. Conveyance uses single, hygienic, high-efficiency 1 hp blower assembly in minimum intervals of 24 linear ft. To reduce risk of contamination, it directs airflow at shoulder and sides of bottle below neck ring.

Kardex Remstar LLC    Westbrook, ME 04092
Sep 19, 2002 Clean Room Vertical Carousel provides high-density storage, queuing, and buffering of items requiring Class 1 to 100,000 environments and connecting up to 4 workstations and/or bays. Unit provides laminar airflow through storage section. Clean air travels through vertical carousel's perforated stainless steel carriers and is vented at bottom of unit to be re-circulated. Carrier shelves can be configured to hold variety of tote sizes.

North American Industries, Inc.    Woburn, MA 01801 5205
Sep 19, 2002 Overhead Crane Component Kits include everything necessary to build overhead bridge crane, except structural cross girder. Featuring fully assembled pieces such as end trucks, hoist, trolley, controls, and electrification, kits are available in sizes up to 100 ton capacity with 120 ft span. All components are painted, wired, factory tested, and adhere to CMAA, ANSI, AISC, and OSHA codes and safety requirements.

Trion Industries, Inc.    Wilkes Barre, PA 18702 6997
Sep 19, 2002 Pull-out shelving offers side bracket design, depth of 15 ¾ or 19 in., and length of 3 or 4 ft. Compatible with shelf edge label strip systems and Shelf Works(TM) dividers and auto feed pushers, pull-out shelves maximize facings by reducing excess vertical space between tiers. It re-stocks by pulling out entire shelf for top access. Tight vertical spacing helps prevent sweeping.

Bivar, Inc.    Irvine, CA 92618 2593
Sep 19, 2002 H-LP Series holders, suitable for single, bi-level, and tri-level T-1 (3 mm) LED display applications, are manufactured from black, 94-VO rated nylon material. They provide PCB retention and uniform elevation during processing and handling, making them suitable for industrial environments. LEDs are perfectly aligned on equally spaced centers. With bifurcated locating pin, widths from 0.170 in., and rigid retention, holders allow virtual side-by-side placement.

CDF Corporation    Plymouth, MA 02360
Sep 19, 2002 Aseptic Packaging line fits tapered, straight wall, plastic, fiber, and steel drums. Suitable for use with filling equipment used in tomato and juice industry, aseptic bags are available in 2 or 3 ply. Offered in LLDPE, MPET, and Nylon, bag line comes with aseptic fills including 1, 2, or 3 in. fitments. Aseptic Bags are suitable for use with fruit puree, apple, liquid egg, tropical fruit, and yogurt ingredients.

Pacific Bearing Co.    Roscoe, IL 61073
Sep 18, 2002 Simplicity® heavy duty linear slides can be custom designed to fit specific needs. Self-lubricated bearings have Frelon® bearing surface that eliminates metal-to-metal contact and absorbs vibration and shock loads. They increase load capacity to over 5 times that of traditional rolling element bearings. Units have no mechanical components to become locked or to gall shafting. They withstand temperatures from -400°F to +500°F.