Epoxies Etc.    Cranston, RI 02921-3407
May 17, 2002 Portable ShotGun(TM) table-top system dispenses either timer-controlled single shot or continuous bead of adhesive. It includes ConProTec Inc.'s MIXPAC 200 or 400 ml pneumatic guns and can use any 2-component adhesive packaged in MIXPAC cartridges. Standard units are mounted on 30 x 24 in. high-density polyethylene work table with foot pedal operation. It has swivel gun mount, adjustable height, and adjustable angle rotation to maximize operator productivity.

Tools For Bending, Inc.    Denver, CO 80223 2195
May 16, 2002 Available for any size or brand of rotary bender with stacked tooling for 2 to 3 sets of tools, Model TFB wiper device is easily adjusted to properly fit different radius bend dies. Each wiper die can be adjusted to locate wiper with correct amount of angle in relation to tube or rake. Wiper die support helps prevent tube wrinkling and prolongs life of dies. Automatic lubrication to each wiper is optional.

Snap-on Industrial    Kenosha, WI 53141 1410
May 16, 2002 Maximum Security tool storage system comes with Remote Patrol electronic security system, which provides keyless entry and motion detector. System features Lock n' Roll drawers with non-slip liners, tubular locking system, and non-directional rubber mat. Top chest has 16,101 cubic in. capacity and measures 21 x 54 1/4 x 24 in. Roll cab has 2 sliding parts trays and one tote tray. It can handle up to 3,600 lbs, and has 22,138 cubic in. of space.

C & H Distributors, Inc.    Milwaukee, WI 53214
May 16, 2002 HERCULES(R) Hydraulic Tilt Table and Container Positioner tilts and positions pallets, crates, boxes, and other containers up to 60 deg. Its 1/60/120 V, 1-HP, motor-driven hydraulic system powers unit, and its deadman-type foot pedal operates hydraulic power. Gravity lowers deck to 10 1/2 in. Table offers 12 in. lip; all-welded, heavy-duty plate steel construction; blue enamel finish; and air pressure gauge.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
May 16, 2002 BSD and CSD rotary screw compressors are 40 to 75 hp units available in flows from 158 to 361 cfm and pressures to 217 psig. They include Sigma Profile airend and Sigma Control system. Oversized airend is connected directly to motor via maintenance-free coupling. All units are fitted with high-efficiency separator system for extremely low oil carry over.

Dorner Mfg. Corp.    Hartland, WI 53029 0020
May 16, 2002 LPZ Series provides load capacity up to 1,000 lbs and maximum conveyor speed of 600 fpm. Conveyors are available in widths from 6 to 48 in. in 2 in. increments, and come in any distance in 1/8 in. increments. They include sealed bearings, T-slots for mounting of accessories, and optional V-guided belts for no tracking adjustments. Applications include packaging, plastic molding, metal forming, and stamping.

SKF Motion Technologies    Lansdale, PA 19446
May 16, 2002 Ball Transfers are available in double-seal units, which feature top seal to keep large particles from getting inside and inner seal to skim liquid and fine dust from ball. Units are available with self-cleaning holes, or with multi-holes, which promote removal of debris. All ball transfers are offered in steel, stainless, or nylon in incremental ball sizes from 1/2 to 2 in. to handle load capacities ranging from 50 to 4480 lbs.

Anderson Products    Worcester, MA 01610
May 16, 2002 First Choice Professional Paint Brushes include flagged and prepared Black China bristles. Hog bristle has natural taper and flagged or split end at small end of taper. Flagging enables brush to pick up, hold, and release paint uniformly. Handles are sanded, treated, and finished to a smooth surface. Brushes have nickel ferrules that will not rust.

Proper Storage Systems, Inc.    Seguin, TX 78155
May 16, 2002 Heated cabinet has stainless steel shelves, temperature controls, HEPA filters, blowers and tapered ductwork. This allows clean, heated air to flow evenly across shelves which guarantees uniform curing.

Meese Orbitron Dunne Co.    Saddle Brook, NJ 07662
May 16, 2002 Heavy-duty OTP intermediate bulk container consists of seamless, reinforced, 1-piece container and base that permits secure shipping and storage of heavy weight products in all-plastic, anti-bulging, reusable design. Rotomolded of LLDPE, IBC holds more than 4,000 lbs. of product and stacks 2 high when filled or 3 high empty. Molded with 4-way lift access, container is offered in 275- and 330-gal capacities.

A-B-C Packaging Machine Corp.    Tarpon Springs, FL 34689
May 16, 2002 Automatic Bottom Sheet Placer places corrugated pad on pallet after it is indexed and before first layer of cases is loaded. Corrugated sheet acts as pad between pallet and cases, and eliminates risk of case scuffing during loading or transport. Sheet is lifted from top of stack by multiple pneumatic spring-loaded grippers that positively grip sheet as transfer head lowers to stack. It works with company's palletizers.

Sealant Equipment & Engineering, Inc.    Plymouth, MI 48170-0965
May 16, 2002 Program-A-Swirl(R) maximizes adhesion between 2 substrates, using less material to wet-out greater area. Swirling is achieved when servo motor spins dispenser's nozzle. System can dispense single-component materials, or it can be used with static mixer nozzle for 2-component, reactive-resin materials. It is typically mounted at end-of-arm tool in robotic applications, or fixture-mounted in automation tooling.

Fisnar Inc.    Wayne, NJ 07470
May 16, 2002 Dispensing Brush Tips, in soft and hard styles, are suitable for applying consistent brush deposits of most materials, particularly grease and lubricants. Tapered bristles ensure accurate applications and long life. Both styles are connected to syringe or dispensing valve by a quick-release Luer-Lock fastening. They can be used with any of company's automatic or manual dispense systems.

EFD Inc.    East Providence, RI 02914-1342
May 16, 2002 Model 1500XL-CA tabletop dispensing unit uses microprocessor circuitry and controlled air pressure to provide control over amount of cyanoacrylate applied, allowing user to dispense same amount every time. Cyanoacrylate is contained in disposable syringe reservoir connected to dispenser console by air line. Clog-resistant, Teflon(R)-lined dispense tips provide trouble-free application. Coalescing filter regulator removes residual moisture from air supply.

Greif    Delaware, OH 43015
May 16, 2002 Eleven liter water bottles feature adjusted shoulder and ribs, allowing 3 containers to fit per slot in industry standard rack. Inside of neck is smooth, ensuring little opportunity for bacteria to form. Handle allows users to easily exchange empty containers for full ones.

Wesco Industrial Products    Lansdale, PA 19446
May 16, 2002 Battery-powered hydraulic stacker/lifters feature load capacity up to 2,000 lbs in both fork (25 in. forks) and platform (24 x 24 or 30 x 32 in. platform) models. Remote control, floor lock, safety screen, LED status indicators, illuminated voltmeter, and computer-controlled charger are standard. Straddle models have 40 in. straddle legs and forks, with inside span of 25 in. (fixed) or 34 to 50 in. (adjustable). Counter Balance model offers 2,000 lb. capacity at 13 in. load center.

IFH Group    Rock Falls, IL 61071
May 16, 2002 Mobile lubrication systems are modular, palletized systems that can be moved to any location, on virtually any motorized vehicle, where lubrication of moving parts is required. They include on-board electric or pneumatic pumps and retractable hose reels with metered dispensing handles. Systems handle 4, 5, or more products including oils, lubricants, and industrial fluids. Containers hold 15, 30, 60 or more gallons.

TE-CO    Union, OH 45322
May 14, 2002 TOOLEX 4 in. Hydraulic Vise has body manufactured from 80,000 PSI ductile cast iron and ways flame hardened to 40 R/C maximum. Vise offers internalized hydraulic segment and max clamping force of 4,000 lbs. Manifold plate mounts to front of vise and has 2 ports for hydraulic connections. Jaw automatically releases to 1/4 in. upon opening. Through-hole mounting and side rails allow for vise mounting.

Schunk    Morrisville, NC 27560
May 14, 2002 Nickel-phosphorus coated, high-strength aluminum-alloy Series FST and FSF enable maximizing payload and moment capacity by mounting bearing rail on moving member and integrating floating coupling with piston shafts. FST twin-piston design lifts loads to 580 N. FSF flat, single-piston design suits minimized space requirements. Bore sizes range from 6 to 25 mm with various adjustable strokes from 10 to 120 mm. End positioning options are available.

Wireway/Husky Corp.    Denver, NC 28037
May 14, 2002 TUF tubular upright frame, with closed-tube construction, is made from 14 gauge, high-strength steel. Teardrop shape on uprights facilitates installation of variety of beam sizes. Polyurethane paint provides durable finish. It is available in 3 x 3 and 3 x 1 5/8 post sizes, with uprights in standard sizes including 36, 42, and 48 deep and up to 28 high.