Smoot Co., The    Kansas City, KS 66103
Mar 28, 2003 Available in 6 standard models in up to 9 different sizes, heavy-duty Precision-Aire units offer housings and end plates cast from grey iron. Rotors are fabricated from steel, and vanes are welded onto shaft and then machined. Use of steel prevents vanes from breaking off when foreign objects become lodged between rotor and housing. Standard models can be fitted with specialized rotors, bearings, or drives. Dust Collector Duty model is offered for dust collection applications.

USVibra, LLC    Tucson, AZ 85745
Mar 28, 2003 Model MPA-827 Component/Stick/Tube Delivery System feeds small quantities of tube-supplied components to placement systems. Standard tooling plates are available for SOIC 8 to PLCC-100 to SOJ and SOMC footprints. Separate amplitude and frequency adjustment controls ensure smooth part transfer and error-free host machine interface communications. MPA-827 interfaces with Panasonic placement systems via standard, pogo pin, power block, and 24 V supply.

Imperial Electric A Kinetek Co.    Akron, OH 44306
Mar 28, 2003 ALPHA 440P delivers material to upper stages and mounts hoist to scaffolding. Main unit stays on ground, while pulley support is mounted to scaffold leg. Continuous duty hoist unit is held to ground by ballast weights, and workers have 80 ft of control cable to remove themselves from beneath load. Lifting capacity is 440 lb, and wire rope length is 260 ft. All metal hoist offers power-up/power-down action with adjustable upper limit switch.

TMP, Technical Machine Products    Cleveland, OH 44102 4431
Mar 27, 2003 Model VMX removes moisture, entrapped air, and volatiles present in compounds. Combining heat and vacuum system, unit is suitable for use with hygroscopic and non-hygroscopic resins. It features hardened mixing rotors and abrasion hardened stainless steel mixing chamber with leak-proof construction. Mixing chamber tilts for quick discharge and cleanout. VMX Mixer comes in 5 L lab models, and in 35, 55, 75, 110, and 200 L production models.

Mi-T-M Corporation    Peosta, IA 52068
Mar 26, 2003 To provide protection for tools and work gear, heavy-duty job site boxes incorporate solid steel construction with full arc-welded seams, powder-coat finish, and tamper-proof padlock protectors. Full length concealed hinges provide additional protection and strength, while reinforced support skids add protection and aid in transport. Available sizes are: 36 x 19 x 16 in., 48 x 22 x 22 in., 48 x 30 x 30 in., and 60 x 24 x 26 in.

KCI Konecranes    Houston, TX 77086
Mar 25, 2003 Series CXT Hoists uses rope drum that is large in diameter but short in length, reducing bending forces and minimizing horizontal hook travel during lowering. Integrated motor and inverter controls provide stepless speed control. Ergonomic design of hook forging and safety catch makes it safer for worker rigging load. Brakes are dust proof and adjustment free for life of hoist. Constant-condition-monitoring technology enhances crane safety and performance.

Flexicon Corporation    Bethlehem, PA 18020 8006
Mar 25, 2003 Mobile Bag Dump System integrates receiving hopper, dust collector, bag compactor, flexible screw conveyor, and explosion proof electrical system on caster-mounted frame with hinged operator platform. Bag dump station collects dust generated during manual dumping and compaction of bags by means of high velocity vacuum fan. Bag compactor contains dust remaining on bag surfaces. Fully enclosed screw conveyor transports material to receiving vessels throughout plant.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Mar 24, 2003 With tools for multi-task machining, CoroTurn RC incorporates Coromant Capto cutting units that work at 45°, utilizing B-axis in multi-task machines. CoroTurn RC 570 cutting heads are used with solid and damped boring bars for internal machining. CoroTurn RC clamps insert in 2 directions by combining downward forces with tip-seat positioning. Tip seat is designed for interchangeability of clamp sets and shims to suit inserts in different cutting materials and degrees of thickness.

Kimberly-Clark Professional    Roswell, GA 30076
Mar 24, 2003 SCOTT® Coreless JRT® Jr. Bath Tissue has no hole and does not employ cardboard core, making it equivalent in length to six standard rolls of bath tissue. Keyless SCOTT Coreless JRT E-Z Load Dispensing System is designed to hold coreless tissue and can be reloaded with one hand; tissue rolls snap in and lock into place. Additional easy-maintenance restroom systems include LEV-R-MATIC® E-Z Load Hard Roll Towel Dispenser and ALL-N-1 Soap Dispensing System.

Mulox, Inc.    Macon, GA 31297
Mar 21, 2003 Safemasterâ„¢ Type C anti-static, conductive containers preserve product quality and guard safety of personnel. They transport nonconductive powders or pellets that would otherwise build up static charge. Guardmasterâ„¢ containers transport and store sensitive compounds. Barrier liners include metallized, foil or clear EVOH materials. Low oxygen, moisture, and vapor transmission rates provide protection against degradation and contamination. Tripmasterâ„¢ containers can be reused and refurbished.

National-Spencer, Inc.    Wichita, KS 67201 0057
Mar 21, 2003 Portable Zee Line Model 5265 features 17 gal, wheel-mounted tank and loading funnel with antisplash rim for clean fills. Equipped with 3:1 ratio pump, system dispenses 3.7 gpm and includes 13 ft long delivery hose and digital meter for dispensing in quarts. Product dispenses oil in workshops, farms, industrial plants, automobile service, and fleet maintenance environments.

Rockwell Automation    Milwaukee, WI 53204
Mar 21, 2003 HPG High Precision Gantries produce accelerations of 50m/s², move at speeds up to 3 m/s, and provide bi-directional repeatability to ±2 µm. LC80 iron-core brushless linear motors require only single-sided magnet track to form linear motor assembly. Gantries come standard with single encoder per axis configuration. Travels range from 250-750 mm per axis. High-resolution optical encoders offer resolutions from 0.1-5 µm per count.

Silgan Containers Corp.    Woodland Hills, CA 91367
Mar 21, 2003 Custom Polystar system produces all-plastic microwavable containers with soft plastic, peel-open lids using Polywelding(TM) spinwelding process. Lids, with no sharp edges, incorporate active oxygen absorber, which provides shelf life for container contents equal to containers with metal ends. Cernotec's Delta Tau motion control system enables process to use combination of pressure and spinning to fuse plastic Polystar lid to Omni container at rates of 600 units/min.

Dorner Mfg. Corp.    Hartland, WI 53029 0020
Mar 21, 2003 Series 3200 Conveyors offer 1,000 lb load capacity, belt speeds of up to 421 fpm, and lengths from 4–99 ft in any 1/8 in. increments. Flat belt, cleated belt, and center drive models are available. V-guide belt option provides enhanced tracking.

Spirax Sarco, Inc.    Blythewood, SC 29016
Mar 21, 2003 STVM Silent Type Vortex Mixing Hosedown Station provides instantaneous, temperature-controlled hot water by blending steam and cold water. Thermal element automatically shuts off steam flow if hot water temperature exceeds temperature set point by 15°F. Vortex scouring action helps prevent scaling. Water pressures range from 20–110 psig and steam pressures range from 40–150 psig. Model V150 produces water from ambient to 150°F and Model V180 produces water to 185°F.

Naeco, Inc.    Absecon, NJ 08201
Mar 20, 2003 Electric, 3-wheel, counterbalance Series EFG-DF has steeringwheel-mounted LCD Information and Service Display (LISA) device that allows driver to choose from 5 individually programmed operating modes. Curve Speed Reduction System prevents possibility of tipping. Steering assembly incorporates jointed, cross-shaft axle, integral steering cylinder, and twin rear wheels. Truck handles loads from 2,500–4,000 lb, reaches travel speed of 10 mph, and offers lift speed of 91 ft/min.

Air Technical Industries    Mentor, OH 44060
Mar 20, 2003 Constructed of welded structural steel, compact lift table lowers down to 3 ½ in. and employs gearbox-driven screw that lifts up to 250 lb load. Sizes are available with widths of 12, 14, 15, 18, and 24 in. and lengths of 18, 19, 20, 24, 28, and 36 in. Vertical lift ranges from 10-48 in. Pushbutton remote control and adjustable limit switches are available. Stainless steel and aluminum construction are available for applications with lower weight requirements.

Meese Orbitron Dunne Co. (MOD)    Saddle Brook, NJ 07662
Mar 20, 2003 Ship Shape(TM) containers, offered in 16 standard colors and various custom colors, provide color-coded system for identification of containers and contents. Rotationally molded in one piece, seamless containers are colored throughout to retain color-coding even if scratched or scuffed. Able to safely accommodate up to 1,500 lbs, containers nest five- to seven-high when empty and can nest or stack higher in storage. Models are offered with 2- or 4-way fork entry.

Penco Products, Inc.    Oaks, PA 19456 0378
Mar 20, 2003 Clipper® Shelving utilizes Hi-Performance® shelves to maximize load handling capacity. Open-type shelving is suitable for general-purpose use. Closed-type shelving units are covered on 3 sides with steel panels to provide stability, protection, and cleanliness for stored items. Clipper shelving can be ordered with full height, partial, and sliding dividers, as well as bin fronts and label holders. Sliding and swinging doors and modular drawers are available.

DJ Products, Inc.    Little Falls, MN 56345
Mar 20, 2003 PartsCaddy Work Positioner 1000 (PWP 1000) eliminates strains, pains, and injuries to employees arising from lifting objects or working on projects not properly positioned for optimum working height. Capable of horizontal/vertical positioning, PWP2000 maneuvers and handles loads up to 1000 lb and offers variable speed twist grips that allow operator to travel forwards and backwards at speeds of 0-3 mph. Heavy-duty, 24 V motor is powered by two 12 V batteries.