Philadelphia Mixers    Palmyra, PA 17078 9518
Apr 03, 2003 CF Counter Flow Mixer Impeller promotes strong up and down pumping action, while helping to control Weissenberg (shaft climbing) effect of fluid being blended. Mixed axial and radial flow allow it to operate at high impeller to tank ratios. Impeller is suitable for high viscosity polymer blending applications.

Handling Specialty, Inc.    Niagara Falls, NY 14304 0279
Apr 03, 2003 Gantry features guard rail, self-locking gate, safety hook-ups, double flanged wheels with locking brakes, and access ladder with safety cage. Air conditioners are lifted from railcar roofs via 2,000 lb capacity electric chain hoist.

Kurt Manufacturing    Minneapolis, MN 55421
Apr 03, 2003 SeraLock Towers, Pallets, and WedgeLock self-aligning workholding modules allow machining of like and unlike workpieces all in same setup. System employs reusable clamping components that can be mixed and matched to hold any size part. Towers and pallets have V shaped serrated surfaces for alignment of WedgeLock clamping modules. Towers are available in 4-, 2-, and single-sided units, with base that mounts to horizontal machining center or indexer.

Wesco Industrial Products    Lansdale, PA 19446
Apr 03, 2003 Stacker incorporates gel cell battery and telescoping rails to lift loads of 2,000 lb up to 130 in high. Extra deep straddle legs (42 in.) can be adjusted from 35–50 in. inside width to handle standard pallets. Offerings include LED battery charging status indicators, illuminated voltmeter, and computer-controlled charger that allows stacker to be used while recharging. Lift mechanism offers double chain/lift support and heavy-duty pump.

B.A.G. Corp.    Dallas, TX 75218
Apr 03, 2003 Super Sack® FIBC is composed of exterior double-walled woven polypropylene, internal baffle design, and reinforced stitching for maintained square shape and stackability. Lift loop design allows for forklift access and package handling. Remote Open Discharge permits operator to safely discharge bag and maintain control of product flow. Bag can handle over 2,500 lb with 5:1 safety ratio. It is suitable for plastic and metal parts, metal powders, and coins.

Steel King Industries, Inc.    Stevens Point, WI 54481
Apr 03, 2003 SK Snap-Guard column protectors, for SK2000 boltless pallet racks, protect front rack column from forklift damage. Adjustable, removable, and flexible, they can be used to protect each storage level. Snap-Guard units are suitable for aftermarket safety protection.

Shuttleworth, Inc.    Huntington, IN 46750
Apr 03, 2003 Constructed of stainless steel, Easy Cleanâ„¢ conveyor has no horizontal surfaces to collect contaminants. Rollers utilize custom compound co-polymer that inhibits spread and growth of bacteria, mold, mildew, and yeast. Anti-microbial properties stem from use of AgION silver-based additive which fights Listeria and other harmful bacteria. Rollers also offer lubricity and reduced wear. Additive is approved for food contact by EPA and FDA.

Stanley Works, The    New Britain, CT 06053
Apr 02, 2003 Multifunctional plastic hybrid hanging workstation, ZAG® Fold Up Workshop, has shelf and load capacity of 110 lb. Suitable for garage or workshop, unit features storage compartments including sorter, organizer, wide pegboard back, and full size work surface. High impact resin construction features fiberglass reinforced vise clamps, light fixture for fluorescent lamps, and 4 optional wooden shelves. Unit is lockable with pad lock eye.

Stanley Works, The    New Britain, CT 06053
Apr 02, 2003 ZAG® Tool Organizer for small accessories and hand-held tools has 39 storage compartments in different sizes and shapes. Portable unit provides sliding drawers for small parts and accessories, compartments for hand tools, and small storage holders for dividing parts. Enclosed in polypropylene portable unit, storage system features handle and latches so it can be closed and carried from storage area to jobsite.

Stanley Works, The    New Britain, CT 06053
Apr 02, 2003 ZAG® Telescopic Metal Legs Sawhorse can have all four legs set at different lengths to create level work surface. Each leg has lever that slides and locks to allow leg to be extended or retracted to create required position. Sawhorse has load capacity up to 2,900 lb per pair and slip resistant rubber inserts on upper frame and legs to provide secure grip on building materials. Unit weighs 12.8 lb and is 2 in. thick when folded.

Anver Corp. - Anver.Com    Hudson, MA 01749 3214
Apr 02, 2003 Self-contained Vacuum Fork Lift Attachment is fully adjustable with pivoting vacuum pads. It handles large sheet, plate, and panels from top using vacuum to prevent damage from forks or grabs. With independent controls that can be located within reach of fork lift operator, battery-powered unit requires no wiring integration and safely handles loads weighing up to 2,000 lb. It is suitable for electric, gasoline, or propane powered forklifts.

Igus, Inc.    East Providence, RI 02914 0349
Apr 02, 2003 Preassembled DryLin® R HTS Lead Screw table is available in various configurations, combining shaft grades, linear housing units, and lengths. Systems are available with steel, stainless steel, and aluminum hard-anodized shaft material.

Combilift Ltd.    Spring, TX 77389
Apr 02, 2003 Able to handle long loads of pipe, tube, and lumber, Combilift also handles pallet loads of product as conventional reach truck in aisles as narrow as 80 in. Vehicle is available in 3 models with lift capacities to 17,000 lb and lift heights to 23 ft. It utilizes 3 all-wheel-drive hydrostatic wheels with cushion tires and four-directional steering. Chassis is offered in lengths of 36, 48, and 55 in., each with retractable mast.

Precision Alliance, The    Fort Mill, SC 29708
Apr 02, 2003 Super Finished Grade SF crossed roller bearings feature highly polished surfaces for smooth motion and consistent frictional force. Units can provide linear travel accuracy in sub-micron range. They are well-suited for applications where precise direct reading of axial force must be obtained, and in optical and electronic scanning applications where vibrations can affect reading or accuracy of system.

Robotic Accessories    Tipp City, OH 45371 9468
Apr 02, 2003 UltiBurr 630, equipped with 0.88 hp quiet air motor, performs burr removal and polishing operations on metals and plastics. Robot program continuously varies compliance force applied to workpiece by changing air pressure to tool’s compliance unit, allowing for automated changes in application characteristics. Variably-compliant end-of-arm device is compliant in all three dimensions (x, y, and z), uses ¼ in. bits, and does not require lubricated shop air.

Wampfler Inc.    Florence, KY 41042
Apr 01, 2003 W4-airsolution eliminates undesirable spring forces, does not reduce travel or available work station length, and incorporates main air supply line via integrated 2 ½ in. pipe. Pre-installed at 6 ft intervals, ½ in. ball valves are provided for tapping air and have outlets connected to trolleys with polyurethane hose. Hose is encapsulated in plastic energy guiding chain, which is internally guided within aluminum profile.

Stanley Works, The    New Britain, CT 06053
Apr 01, 2003 ZAG® Stack and Slide Organizer Drawer System allows separate organizing drawer units to become one complete drawer system without any connecting housing unit. It stores various hand tools, parts, and accessories while keeping them clearly organized on workbench. Unit can also be separated into single portable organizers which can be taken to jobsites according to project needs. Construction consists of clear polycarbonate lid and plastic shell.

Topper Industrial    Sturtevant, WI 53177
Mar 31, 2003 Dunnage Rotation Ergo-Cart, with loads up to 3,000 lb, can be pushed or tugged by workers or tuggers to assembly line or workstation, creating fork-truck-free environment. Casters have sealed, lubrication-free bearings. Once set in position using foot-pedal operated stop, Ergo-Cart table top rotates so production workers can reach parts within ergonomic window. Cart includes 90° or 180° detent stops and easy-release tow bar.

Meese Orbitron Dunne Co. (MOD)    Saddle Brook, NJ 07662
Mar 31, 2003 UN-certified, all-plastic 275 and 330 gal Unitote intermediate bulk container deters and prevents unauthorized access. Polyethylene door is set into pallet base that is locked with steel bolt to block access to discharge assembly. Security system accommodates standard padlocks and plastic or metal security seals to provide immediate evidence of unauthorized access. Container safeguards chemicals, pharmaceuticals, edible oils, flavors, fragrances, and other regulated materials.

Smoot Co., The    Kansas City, KS 66103
Mar 28, 2003 Available in 6 standard models in up to 9 different sizes, heavy-duty Precision-Aire units offer housings and end plates cast from grey iron. Rotors are fabricated from steel, and vanes are welded onto shaft and then machined. Use of steel prevents vanes from breaking off when foreign objects become lodged between rotor and housing. Standard models can be fitted with specialized rotors, bearings, or drives. Dust Collector Duty model is offered for dust collection applications.