Dynalab Corp.    Rochester, NY 14623
Jan 26, 2011 Suited for use when working with hazardous particulates and microorganisms, Bio II Biological Safety Cabinet Type II, A2 employs HEPA filter that is 99,999% efficient on 0.3 µm particles. Work space is swept by class 100 (ISO 5) laminar flow, and air flow is completely recycled through perforated grills around work surface. Construction features epoxy-coated steel cabinet, hinged front window of UV-treated polycarbonate, automatic ECM fan, and 254 nm UV lighting.

Cyberoptics Semiconductor, Inc.    Beaverton, OR 97075 0276
Jan 26, 2011 Moving through semiconductor process equipment, Airborne Particle Sensor monitors airborne particles, reporting back information in real-time to allow engineers to validate and analyze wafer contamination. Vacuum-compatible unit can detect 0.1 µm particles in multiple Bin schemes and does not require engineers to open chambers or expose ultra-clean process areas. Using companion software, particle data can be recorded to compare past to present operations as well as one tool to another.

nanoTherics Ltd    Stoke-on-Trent ST4 7QB  United Kingdom
Jan 26, 2011 Based on proprietary magnet configurations and oscillating magnet arrays operating at fixed frequency, magnefect-LT(TM) promotes magnetic nano particle/DNA uptake into cells to improve non-viral gene transfection while maintaining cell viability, even with difficult cells types including neuronal and primary cells. With magnefect-LT, transfection times are less than 30 minutes.

Dynalab Corp.    Rochester, NY 14623
Jan 25, 2011 Rated to Class 100, Optigel constantly blows air horizontally through absolute HEPA filter into working area to protect products from existing contaminants in air. Even airflow prevents turbulence and subsequent cross-contamination, and control panel has digital display that shows air velocity, inside pressure, and fan operating conditions. Filters include 2 pre-filters and 1 mini-pleat HEPA filter, efficient to 99.999% on particles at 0.3 µm.

Dynalab Corp.    Rochester, NY 14623
Jan 25, 2011 Featuring modular design, IV-Gel Cabinet provides clean air working area of Class ISO-5, according to ISO-14644, Class 100. Unit functions by pulling air evenly through pre-filter and then blowing it through HEPA filter into work area. Air flows vertically across work surface, preventing air turbulence that could cause cross contamination. Control panel shows air velocity, inside pressure, and fan operating conditions, while ECM fan automatically compensates for filter clogging.

EPI Labelers    New Freedom, PA 17349
Jan 25, 2011 Featuring vertical and horizontal adjustments that allow for accurate label placement, Top and Bottom Labeler is designed to label top and/or bottom of tub style containers, cartons, and clamshell packaging. Unit is made with corrosion-resistant materials for operation in harsh conditions. Able to integrate with specific packaging systems, labeler is suited for cosmetic, personal healthcare, and retail food including, baked goods, produce, and confectioneries.

Anver Corp. - Anver.Com    Hudson, MA 01749
Jan 24, 2011 Including adjustable handlebar and integrated controls, Anver VPFL-4 air-powered lifter allows one person to handle foam, rubber, plastic, composite, and thin wood sheet for feeding cutting tables and other equipment. Below-the-hook unit operates on standard shop air and requires 8 in. of head room. Device comes with parking stands to protect vacuum cups. Other features included are air filter, vacuum check valve, vacuum gauge, and leakage sensor with audio-visual alarms.

Schunk    Morrisville, NC 27560
Jan 21, 2011 With functional components of hardened stainless steel and repeat accuracy of less than 5 microns, VERO-S module features dual clamping stroke and integrated turbo function that enable pull-in/retention force up to 9,000 lb. Locking is mechanical via spring package, and holding forces are rated to 16,800 lb. For opening module, 85 psi pneumatic pressure is sufficient. Product clamps workpieces, pallets, clamping stations, existing fixtures, and tombstones with one or more clamping pins.

Meissner Filtration Products, Inc.    Camarillo, CA 93012 8760
Jan 21, 2011 Designed to meet requirements of biopharmaceutical industry, TepoFlex® Biocontainers are made of polyethylene-based TepoFlex® film with combined gas and water vapor barrier that protects product stored within them. Units are available with silicone or TPE tubing with variety of connections, and can be specified with or without capsules. Certified animal component free, biocontainers come in 50, 250, and 500 mL sizes as well as 1, 2, 5, 10, and 20 L sizes.

Schunk    Morrisville, NC 27560
Jan 21, 2011 Designed for harsh environments, PHL long stroke grippers use multi-tooth guidance or profiled rail guidance. Gripper fingers with guiding carriage and ball bearings minimize friction and evenly distribute force, and jaw guide is sealed and permanently lubricated to increase bearing capacity and reduce wear. Units are offered in 5 sizes with piston diameters from 25-63 mm, with 3 strokes/size available, covering range of strokes from 30-160 mm.

All Metric Small Parts (aMsp)    New Hyde Park, NY 11040
Jan 21, 2011 Featuring space saving design, MAKTOOMTHA236 Series features zinc die cast handles with chrome-plated finish. Handles are hidden within and rotate out for use with fully concealed mounting hardware. Suitable for lifting or pulling, handles are typically used on measuring instruments, telecommunication devices, distribution boards, distribution panels, and control boards.

Sidel, Inc.    NOrcross, GA 30092
Jan 21, 2011 Suited for bottling lines with speeds of under 30,000 bottles/hr, AQ-File conveyor is used for accumulation of filled or empty containers. Unit enables accumulation by varying length of accumulation chain, while mobile carriage moves back and forth to create accumulation and advances to discharge containers. Format changeovers require minimal adjustment, and product is available in lengths from 10-50 m and with 1-3 modules in parallel, straight, or L configuration.

JLG Industries, Inc.    McConnellsburg, PA 17233 9533
Jan 20, 2011 Model 340AJ boom lift has 20 ft of horizontal reach and 17 ft up-and-over reach, as well as 500 lb capacity. Featuring gross vehicle weight of 9,700 lb, unit includes steel hoods to maximize durability as well as environmentally-friendly Tier 4 diesel engine, while gas/liquid propane engine is also available. Product is suited for general contractors, steel erectors, painters, and commercial construction workers.

O.BERK Co.    Union, NJ 07083
Jan 20, 2011 Made from SAN plastic, Classique Jewel Jars come in .5 and 1 oz. sizes with 43 mm neck finish, 2 oz size with 56 mm neck finish, and 4 oz size with 63 mm neck finish. Necks are triple threaded, and custom-fitted caps are available in same stock colors as jars: cobalt, emerald, amber, garnet, tangerine, blueberry ice, berry, grape, lime, clear/frost, white, black, silver, gold, brushed, and polished. Pressure sensitive cap seals, induction foil cap seals, and dust covers are also available.

Tente Casters, Inc.    Hebron, KY 41048
Jan 20, 2011 Offered in swivel and swivel with brake versions, 3 in. LEVINA caster has housing and wheel made from synthetic materials with integrated threadguards. PJP wheel features polypropylene center; grey, non-marking TENTEprene (thermoplastic rubber) tread; precision ball bearing with threadguards; and blind hole for furniture fittings. PJO wheel is also available, featuring plain bearing without threadguards (dust guards).

CounterBalance Corp.    Warminster, PA 18974
Jan 19, 2011 Lift-A-SYST counterbalance enables hospitality establishments to utilize extra space and functionality a countertop door or flip-up counter provides. Capable of balancing countertop doors at any position within 95° range of motion, this supplemental hardware component offsets weight of countertop door via torsion applied to rods during upward/downward motion. There are 6 sizes available to accommodate door lengths from 21-39 in. and weights from 22-72 lb.

JLG Industries, Inc.    McConnellsburg, PA 17233 9533
Jan 18, 2011 Capable of elevating operators 150 ft requiring only weight permit, Ultra Series model 1500SJ also features telescopic jib that extends up to 25 ft for additional vertical and horizontal reach. Self-propelled unit delivers dual 1,000/500 lb capacity, 3 steering modes, and systems that assist in safe positioning. Along with steel hoods that provide durability, lift offers graphic LCDs that relay key information to users to facilitate operability.

Key Technology, Inc.    Walla Walla, WA 99362
Jan 18, 2011 Suited for fragile, seasoned, coated, and frozen food products, Horizon(TM) features lube-for-life mechanical drive capable of moving product at speeds up to 42 fpm on single continuous conveyor up to 100 ft long. Horizontal motion produces continuous self-cleaning action, preventing buildup of coatings, oils, or seasonings as product slides along pan. Available in widths from 12-60 in., sanitary conveyor can be mounted to floor or other machinery or suspended from ceiling.

NJM/CLI Packaging Systems Int'l.    Lebanon, NH 03766 1403
Jan 18, 2011 Designed to attach outserts to round, square, and rectangular pharmaceutical containers, Model 277 Auto-Sert Outsert Applicator handles outserts from 0.875-2.5 in. wide, 1.125-4 in. high, and up to 1.5 in. thick at speeds up to 220 bottles/min. Vacuum cup at end of rotating arm moves into hopper to ensure outsert is securely held, while pivoting arm rotates to deliver outsert to container. Featuring heavy-duty stainless steel and aluminum construction, system meets GMP standards.

Sennebogen North America    Stanley, NC 28164
Jan 17, 2011 Suited for ports and steel yards, 860 M is 165,000 lb, rubber-tired material handler. Crawler-mounted model, R-HD, has 180,000 lb range. Optional configurations include rail, barge, gantry, and stationary pedestal mounts. Offered with boom and stick configurations to suit application, handlers are powered by 364 hp, 11 L Cummins engine and can be fitted with D270 maXCab or D300/260 hydraulically elevating cab. Stance supports lifting/swinging of full loads through 360° arc.