Anver Corp. - Anver.Com    Hudson, MA 01749 3214
Apr 14, 2004 Made from electropolished 304 stainless steel, Model VT180 includes white hose cover and adjustable side-support for fiber drums. With interchangeable vacuum heads and quick disconnects, it can adapt to variety of drum sizes weighing up to 500 lb. Equipped with ergonomic handle and adjustable up/down controls, drum handler swivels 360° under vacuum and provides 100% continuous duty cycle. Vacuum pumps are remote and have wash-down coating.

EMKA Incorporated    Middletown, PA 17057
Apr 13, 2004 For quarter turn latches and swing handles on NEMA 4 enclosures, there is no separate gasket to lose or forget. Wide, more compliant, UL® polyurethane foam gasket ensures improved sealing. UL listed, urethane gasket material resists oil, water, ozone, chemicals, and weathering.

Topper Industrial    Sturtevant, WI 53177
Apr 12, 2004 Pump-Up Tilt Cart features pump-up device on speed-control dampening cylinder for tilting heavy loads. User can return partial/full load to level position by pumping foot pedal minimal number of strokes. Cart can be returned to upright position when change-over is required before container is empty. It is also suited for empty-to-full applications.

Oil-Rite Corporation    Manitowoc, WI 54221 1207
Apr 12, 2004 To guard against dangerous low liquid supply, Liquid Reservoirs feature low-level safety switch consisting of float with magnet inside. Filter assembly, attached to tie rod, helps prevent dirt and contamination that may be in liquid from damaging equipment. The 100 mesh filter element can be removed for occasional cleaning. End plates and base are aluminum alloy. Acrylic reservoirs are standard and can be furnished in 1 qt, ½ gal, and 1 gal capacities.

Styluscentral.com    Warwick, RI 02886
Apr 12, 2004 Made of anodized aircraft-grade material, aluminum case is molded to fit exact dimensions of Treo 600 smartphone profile. Neoprene lining secures smartphone and protects it against drops, shocks, and collisions. Cutouts in case provide access to stylus, Secure Digital I/O expansion slot, camera, microphone, headphone jack, reset button, IR port, and charging/communication port. It also includes slot for storing one extra SD card.

Caterpillar, Inc.    Peoria, IL 61629
Apr 09, 2004 Models 267B, 277B, and 287B are rubber-tracked machines with suspended undercarriage that transfers machine weight to ground through wheeled contact points bearing against track. They are powered by Cat 3044C DIT diesel engine with 3.3 liter displacement. Model 287B features 3,600 lb operating capacity, while Models 277B and 267B offer capacities of 2,950 lb and 2,900 lb, respectively. All employ anti-stall system and pilot hydraulic joystick controls.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Apr 09, 2004 Available in stainless steel or carbon steel, Pogo Plus provides continuous delivery of low to medium viscosity coatings and adhesives. Unit, with 2-ball design, uses double-acting pumps that deliver material on up and down stroke. Features include upper ball check, energized upper U cup, and 2 in. air motor with unbalanced valve design. Contained leak path prevents material build-up on drum, and divorced design prevents material migration into motor.

Tracewell Systems, Inc.    Westerville, OH 43081-8846
Apr 07, 2004 CO-Starâ„¢ AdvancedTCAâ„¢ Central Office Shelf is 19 in. 13U system that provides 14 slots that are electrically and mechanically compliant with PICMG 3.0 AdvancedTCAâ„¢ specification. Unit meets GR-63, GR-1089 UL/EN 60950 EN55024 for NEBS Level III and uses high flow rate and high pressure cooling. Other features include high-performance shelf management and high-performance backplane for 5 Gbps rates. Both 14-slot dual-dual star and full mesh versions are offered.

Advance Lifts, Inc.    St. Charles, IL 60174
Apr 07, 2004 Advantage model ZEMHRPT4527 high-rise electric pallet truck can move skids and containers from place to place and then raise load to 31½ in. working height to act as workstation for assembly work or stacking applications. It has 2,200 lb capacity, 45 in. forks, and 3 1/3 in. lowered height. Unit operates off 12 Vdc battery for raising and lowering loads and employs 2 hp motor and tiller steering handle.

Hyster Co.    Greenville, NC 27834
Apr 06, 2004 Powered by AC induction drive motor, J40-65Z series sit-down, counterbalanced, pneumatic tire lift truck expels no exhaust emissions. Series features 80 V electrical system, extended shift function, and in-dash display. Thermal system modifies functions and accommodates temperature increases while permitting continuous operation. MONOTROL pedal allows one-touch direction and speed control, and hydrostatic steer-on-command promotes maneuverability.

Raymond Corporation, The    Greene, NY 13778 0130
Apr 06, 2004 Available in weight capacities from 3,200–4,500 lb., Model 7400 Reach-Fork® truck comes in reach and Deep-Reach® configurations. Ergonomic features include universal stance, secondary control handle, and spring suspension and inertial dampener for operator compartment. Open view mast design provides view of base legs, load, and rack. Truck has A-frame suspension, display panel for real-time data, and optional heated control handle and floor cushion.

Flow-Tek    Houston, TX 77041
Apr 06, 2004 Media Containment Unit offers secondary seal in addition to primary stem sealing capacity. It provides environmental protection and plant safety, and can be monitored for early detection of stem leaks. Intended for automated and manual service, MCU features live-loaded stem sealing with belleville washers that automatically compensate for temperature and pressure fluctuations. Investment cast, stainless steel unit is corrosion-resistant and suited for harsh environments.

Yamaha Robotics    Edgemont, PA 19028
Apr 06, 2004 With positional repeatability of ±5 µm, Phaserâ„¢ linear motor slides provide direct feedback of table position through 1 µm high-resolution proprietary magnetic linear scale. Compact products offer max acceleration of 3 Gs, max speed of 2,500 mm/sec, payloads to 20 kg, and stroke lengths to 2,000 mm. Features include stainless steel cover band, self-lubricating bearings on linear guide, and no-wear parts in drive section.

Combilift Ltd.    Spring, TX 77389
Apr 06, 2004 Model C6000 GT features internal combustion, LP gas engine designed to operate in steel service centers and outdoors in storage yards and loading areas. Two models offer capacities of 6,000 and 10,000 lb. Sideloader features hydrostatic drive and brakes, narrow aisle configuration for operation in confined areas, and cushion tires on rear for load stability. Operator compartment has rubber-mounted, full glass panels for visibility and protection from elements.

Kardex Remstar LLC    Westbrook, ME 04092
Apr 05, 2004 Shuttle(TM) Vertical Lift Module and Horizontal Carousel System facilitate manufacture of medical devices. Shuttle VLM is comprised of vertically arranged trays in front and rear, inserter/extractor platform, and computerized controls. It utilizes otherwise wasted overhead space by scanning stored item's height to store in least amount of space. Horizontal carousels feature bins that rotate on oval track, delivering stored items to operator on command.

ATR-Strothmann    Cambridge, ON N1R 7H7
Apr 05, 2004 Whiplashâ„¢ telescopic press feeders handle small to large-sized parts with payload capacity ranging from 88–330 lb and Y-axis accelerations from 10–12.5 m/s². Each 2-axis unit functions as press loader, press unloader, destacker feeder, and pick and place device. Whiplash feeders use servo-driven, belt lifter that is integrated with rack-and-pinion drive telescopic shuttle arm. They can be mounted to fixed press bridge, free-standing frame, or traversing bridge.

Automated Control Systems, Inc. (ACS)    New Haven, IN 46774 1362
Apr 05, 2004 Wyndmaster 348 consists of fully automatic, 8-reel take-up that can be used with any product strip up to 3 in. wide and any reel diameter up to 30 in. It uses 4-position horizontal indexer with 2 reels at each position and receives product at speeds to 600 ipm. Features include paper interleaf operation, tangential feeder, and automatic sample strips with programmable length. Changeover is timed at 1 min between overwind and underwind mode.

United Grinding Technologies, Inc.    Miamisburg, OH 45342
Apr 02, 2004 Loading Systems are suited for low-volume production runs or prototype work. Standardized mechanical modules feed and correctly position parts at clamping point. Centrally controlled and programmed, units permit loading and storing of parts before and after machining. Systems for external and universal machines are based on portal loading principle with V-grips. Swiveling loading systems are integrated inside internal grinding machines.

Moyno Inc.    Springfield, OH 45501 0960
Apr 02, 2004 Moyno® Pipelinerâ„¢ Grinder utilizes spring-loaded, tungsten carbide cutter assembly that minimizes chance of jamming and eliminates need for reversing controls. Quick-Change Cartridge Assembly facilitates maintenance processes, and cartridge assembly can be removed and replaced in minutes with standard tools and no piping disconnections. Solids reduction unit employs single mechanical seal with silicon carbide faces and comes with 15 mm standard shearplate hole.

Fisnar Inc.    Wayne, NJ 07470
Apr 01, 2004 Model I&J123-D50 can dispense precise deposits of mixed material repeatedly without mess or concern for change in viscosity during working life. It mechanically displaces each side of cartridge via pair of stepping motor-driven rams, which can dispense mixed material in micro liter range. Integral Palm computer allows up to 100 programs, and stepping motor drive is transmitted via flexible Hydraulic-Link. System is supplied with bench stand or gun handle.