Material Handling & Storage
(Showing headlines 5881 - 5900) << 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 ...
Custom Polyethylene Bags feature Velcro® brand closures.
Jannel Packaging, Inc.
Holbrook, MA 02343 1338
Jul 07, 2004 Using Velcro® brand closures, Janstripâ„˘ Polybags open and close without exact alignment, attach in wet or frozen conditions, do not trap air or moisture, and lay flat. Bags are made from 2â€“4 mil thick polyethylene in sizes from 4â€“15 in.˛. They can be hole punched, supplied with doorknob hangers or handles, gusseted, and wicketed. Available with up to 6-color custom printing, including PMS color matching, bags can incorporate write-on blocks.
Lift/Tilt Table is suited for tow line installations.
Pentalift Equipment Corp.
Buffalo, NY 14240 1510
Jul 07, 2004 Designed for use in assembly line applications, Tow Line Lift/Tilt Table provides workers with ergonomically-sound lifting and positioning assistance. Features include 4 heavy-duty swivel casters, 35° dual-direction tilt top, on-board 12 V motor, sealed Pentaflow Hydraulic Cylinder, and foot-pedal controls. With 2,000 lb load capacity, table has lifting capability from 24 in. closed height to 36 in. lift height.
Coating Pump automatically controls coating viscosity.
Innovative Machines, Incorporated
Jenison, MI 49428
Jul 07, 2004 Coating pump constantly monitors coating viscosity and adds solvent when necessary, maintaining viscosity of coating from 1â€“10,000 centipoise. It continuously stirs and circulates coating to prevent any change in viscosity. Housed in NEMA 12 electrical enclosure with PLC and touch screen controls, product features double diaphragm transfer pump and aluminum base with locking casters. Air cylinder lowers and raises coating container for removal and cleaning.
Dolly weighs drums while transporting them.
Liftomatic Material Handling, Inc.
Buffalo Grove, IL 60089
Jul 07, 2004 Ergo-1000-OBS allows operator to pick, lift, weigh, and move plastic, fiber, and steel drums. Using load-cell technology, weighing device has zero-out, auto shut-off, and metric and imperial measurement capabilities. Transportable drum handling device is equipped with Parrot-Beak® mechanical clamping system and rubber belt cradle. Also available with optional printing feature, product is accurate within 1 lb or 0.25% up to 1,000 lb.
Modular Rails provide conveying system flexibility.
Poly Hi Solidur, Inc., Power Transmission Div.
Fort Wayne, IN 46809
Jul 07, 2004 TIVAR® Rail® offers modular rails with C-design that clamp TIVAR® tight against stainless steel sheath. Assembly design eliminates pop-outs in multidirectional bends and gaps, while lightweight profile requires minimal brackets. Components meet industry standards for guide rails sizes, resulting in conveying system with flexibility. Product is self-lubricating and chemical-, corrosion-, moisture-, and wear-resistant.
Cable and Hose Carriers feature smooth, quiet operation.
Gortrac Div. Of A & A Mfg. Co.
New Berlin, WI 53151
Jul 06, 2004 QT Series Nylatracâ„˘ cable and hose carriers incorporate molded elastomer torsion bearings at link pivot points. Suited for applications on equipment used in laboratories, medical equipment, and semi-conductor equipment, products are available in standard sizes for Nylatrac SP, KS, NP, TS, and TL Series. They are also fit for other applications where noise levels are of concern.
Dispense Stations suit robotic adhesive applications.
Henkel Loctite Corporation
Rocky Hill, CT 06067
Jul 06, 2004
Featuring slide design, fully integrated Motion Control Dispense Stations control any Loctite® syringe, cartridge, or dispense valve. They offer height, position, and angle of dispense point adjustments, as well as stroke adjustment of 0-2 in. Vacuum suck-back eliminates drips during syringe dispensing. Repeat mode cycles units continuously with foot switch. Stations are suited for applications that require circular dispense patterns or advancing dispense valves.
Wire Rope Hoists withstand demanding applications.
The David Round Co., Inc.
Streetsboro, OH 44241
Jul 02, 2004
Built from modular gearboxes, off-the-shelf motors, and standard brakes, Series EH is custom-designed to meet headroom, clearance, speed, duty-cycle, and environmental requirements. All hoists feature sealed gearing and are available with variety of control options including flux vector drives.
Gravity Flow Line Feeds Carts suit assembly operations.
Clayton, DE 19938
Jun 30, 2004 MHC gravity flow line feed carts maximize product visibility with open-wire construction, while providing flexibility to manufacturing, assembly, and material handling operations. Assembled in minutes without use of tools, each cart features shelving that can be adjusted in 1 in. vertical increments up to 30° angle. Shelf dimensions provide adequate space for double kitting. Measuring 69 in. high, carts are available in 36, 48, and 60 in. lengths.
Screw Jacks are available in standard metric sizes.
Nook Industries, Inc.
Cleveland, OH 44125
Jun 30, 2004 Ranging in capacity from 5â€“200 kN, ActionJac ball screw and trapezoidal screw jacks provide complete range of universally accepted mechanical actuators. Nook accessories, including boots, limit switches, top plates, clevises, trunnion mounts, and IEC motor mounts, are available for metric jacks.
Level Loader can be fed with hand pallet truck.
Southworth Products Corp.
Portland, ME 04104 1380
Jun 29, 2004 Designed for manual loading/unloading of pallets, Roll-Onâ„˘ helps reduce worker fatigue. Platform lowers to floor height for pallet placement/removal via hand truck. Incorporated turntable allows users to rotate loads so they always load/unload from near side. Unit can be accessed from all 4 sides with minimum stretching or reaching. With 2,500 lb capacity, product is equipped with photoelectric toe guard which stops downward travel upon interruption.
Self-Contained Conveyor provides portable solution.
Superior Industries Of Morris
Morris, MN 56267
Jun 29, 2004 Conveyor provides solution for producers requiring operation in remote areas where electrical power is not available. To meet portability requirements for any jobsite, radial stacking conveyor runs on diesel engine mounted on its undercarriage. It offers production capacities to 500 tph and is available in 40, 50, 60, 80, and 90 ft lengths. Working in conjunction with any portable plant, conveyor can be setup and operational within minutes.
Applicator facilitates robotic fluid dispensing.
Sealant Equipment & Engineering, Inc.
Plymouth, MI 48170-0965
Jun 29, 2004 Servo-Ribbon Applicator combines AC servo-motor and fluid-dispense valve to robotically position valve's tip at correct angle to deliver ribbon-shaped material pattern. Valve is suited for fixed, automated, or robotic fluid-dispensing applications with shaped-orifice fluid nozzles such as slotted ribbon tip, fan-spray tip, or side-outlet extruded-bead tip. It dispenses PVC sealers, epoxies, polyurethanes, paints, silicones, mastics, and lubricants.
Road Drag can be pushed or pulled by truck or tractor.
Paul Wever Construction Equipment Co., Inc.
Goodfield, IL 61742-0085
Jun 29, 2004 Hydraulically-controlled from within cab of truck, Seven Blade Road Drag fits several different types of drive units. It can pitch from side to side and front to aft, and can have pressure applied to front hitch, allowing operation on flat lands and in ditches. Attachment is equipped with quick-change 4 x 6 angle blades, which can be found at any steel shop.
Labeling Tape Dispensers can be used with one hand.
Wayne, NJ 07470
Jun 29, 2004
Write-On(TM) Labeling Tape Dispensers hold mixed tape colors and widths to meet labeling needs. As each new label is advanced and cut off by serrated edge, fresh length of label tape is positioned on writing platform. Supplied with one roll of white Scienceware® F13463 series Write-On(TM) Tape, product features plastic-coated, weighted steel base with rubber feet to prevent slipping on benchtop. Molded-in penholder wells hold writing instruments.
Press Line delivers flexibility for varied applications.
AP&T North America, Inc.
Monroe, NC 28110
Jun 29, 2004 Designed for flexibility, ZM Multi-transfer allows several smaller presses to be used with varying press forces at different stations. Without requiring pit in many cases, press line is suited for applications in white goods and automotive industries.
Spindle Lift Tables integrate into linear guide systems.
East Providence, RI 02914 0349
Jun 28, 2004
DryLin SLW is a flat linear table with spindle drive that delivers high torsional strength at just over 1 1/8 in. high. DryLin HTSP is a plastic spindle lift table with DryLin R linear bearings. Equipped with plastic crossbars and slides, unit is corrosion- and lubrication-free. Stroke is adjustable, either manually or by servo motor. Both tables are suited for use in packaging and textile industries.
Material Handling Carts fold and store without tools.
Sumner Mfg. Co.
Houston, TX 77088 4036
Jun 28, 2004 Mac Rackâ„˘ and Mac Rack IIâ„˘ each have 8 storage arms and are suited for transporting conduit, strut, threaded rod, PVC pipe, and copper tubing. With one large cradle, Bundle Macâ„˘ transports larger quantities of same materials. Functioning as platform truck, Flat Macâ„˘ moves large, heavy objects around jobsite, while 'Tainer Macâ„˘ lifts boxed wire, hand tools, and other jobsite materials to elevated location. Each stackable cart has 6 in. casters and powder-coat finish.
Wire Carts have spindle-locking mechanism.
Sumner Mfg. Co.
Houston, TX 77088 4036
Jun 28, 2004 Offered in 4 models, Caddy Mac® wire carts feature wire guides for smooth feeding from spool (Caddy Mac No. 3) and bottom platform that allows cart to be used as dolly (Caddy Mac No. 1 and 3). Spindle-locking system ensures that spindles stay put during transportation. Spindles swing out to set position, facilitating loading of wire spools. Caddy Mac No. 3 can hold one 24 in. dia spool, while Caddy Mac No. 2 holds up to 24 smaller spools.
Indexing Table offers 2 axes of motion.
Niagara Falls, NY 14304
Jun 28, 2004 OSA-LATOR® LP2000 head/tailstock model provides one pair of arms on each side of sloped table with cycloidal bearings that can be attached to variety of drives. Available in 2-position tables, design can be customized to fit other OSA-LATOR table models. Distance between head/tailstock faceplates can be modified. Model LP2000-2X-HT offers 1,000 lb capacity head/tailstock unit with 20 in. swing radius on each of 2 positions.
(Showing headlines 5881 - 5900) << 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406