Clean Air Products Clean Air Systems Div.    Minneapolis, MN 55445 1828
Nov 23, 2004 Cleanroom Series 91HF uses aluminum framed, motorized HEPA filter for ~100% interior cabinet ceiling coverage. Filter provides ~650 cfm laminar flow to remove airborne contamination from cabinet and garments as they are taken and returned to rack. Constructed with 16-gauge, cold-rolled steel, cabinets are available with adjustable wire or perforated shelves and measure 25 x 49 x 95 in. Garment pole accommodates 24 garments with 2 in. spacing.

Genie, a Terex Company    Redmond, WA 98052
Nov 23, 2004 With max working height of 141 ft, horizontal outreach of 69 ft 9 in., and up-and-over clearance of 75 ft 6 in., Z-135/70 provides access to up, over, and in applications. It features X-Chassis(TM) axle configuration, where each axle pivots from vertical mounting pins, and Jib-eXtend(TM) jib that extends platform from 12-20 ft. Other components include 4WD, foam-filled tires, 8 ft self-leveling steel platform, and 360° continuous turntable rotation.

Bel-Art Products    Wayne, NJ 07470
Nov 18, 2004 Scienceware® Molded 100 mm Petri Dish Rack holds up to 42 Petri dishes with lids when carrying, incubating, or processing samples on bench top. Up to 4 loaded racks can be stacked together and interlocked to prevent accidental knock-over. Base area has access slots beneath Petri dishes to facilitate removal of dish stacks, and center divider incorporates carrying handle with space for labeling. All parts are molded of white polypropylene.

PIAB Vacuum Products    Hingham, MA 02043
Nov 17, 2004 Featuring modular, expandable design, Adjustable Vacuum Palletizing System accommodates dissimilarities in product size without need for additional end effectors. It includes VGSâ„¢ 3010 Vacuum Gripper System in which COAXâ„¢ vacuum cartridge is integrated with DURAFLEXâ„¢ suction cup in single unit. Palletizing system is suited for handling products in food, beverage, chemical, pharmaceutical, personal care, and industrial applications.

Calgon Carbon Corp.    Pittsburgh, PA 15230 0717
Nov 17, 2004 Protectâ„¢ Containment Systems include single-pass activated carbon adsorbers for filtration of weapon-grade toxicological agents. Systems isolate and remove potentially hazardous gases such as acid gas, organic vapor, mercury, ammonia, radioactive iodine, formaldehyde, and chemical warfare agents. They are manufactured to specification and assembled with other components such as building air handling systems, HEPA filters, precipitators, and control panels.

Mass-Vac, Inc.    North Billerica, MA 01862 0359
Nov 16, 2004 Featuring 304 stainless steel vessel, Model MV has 1½ in. thick clear acrylic top, which accepts optional rotary motion feed-thru for stirring or manipulating batch contents from outside. Suitable for epoxies, urethanes, resins, and other viscous fluids, feed-thru has ¼ in. dia shaft supported by 2 ball bearings for friction-free operation, and is sealed with preloaded Viton O-ring. It can be operated manually or automatically at up to 500 rpm.

EGS Electrical Group    Skokie, IL 60077
Nov 16, 2004 Clamps, straps, and hangers assist contractors in running and anchoring electrical conduit. Clamps are formed from malleable iron with galvanized finish, and accommodate conduit in trade sizes from ½â€“6 in. They secure rigid or flexible metal conduits, and IMC or EMT running across, parallel, or perpendicular to beams, channels, cable tray, and angle supports. Steel hangers and snap-type straps are zinc-plated and handle trade sizes from ½â€“4 in.

Skyjack Inc. / Boom Division    Guelph Ontario N1H 1B9, CD   Canada
Nov 12, 2004 Reaching work heights up to 25 ft, SJIII Compact 3215 and 3219 feature 23% gradeability and 26 x 64 in. platform. Narrow design allows them to fit through standard doorway. Units offer variable-speed front wheel hydraulic drive, 90° steering, proportional drive-lift joystick control system, and positive traction. Safety features include lift relief valve that limits capacities, manual lowering system, and tilt alarm with drive-lift cutout.

SAS Automation, Ltd.    Xenia, OH 45385
Nov 12, 2004 DX Robotic Gripper Platform has D-shaped frame profile that provides 6 mounting sides for mating robotic components, with 2 sides at opposite 45° angles. Profile also allows back-to-back mounting to create round or tree trunk boom style end effectors with 8 mounting sides. From main boom mounted to robotic arm, flats of profile can be rotated 90° to allow for tree branch or cross frame mounting configurations. All sides have X nut channels to accept gripper components.

Kinetic Systems, Inc.    Boston, MA 02131
Nov 12, 2004 Available with or without mounting holes, BenchMate Series 2200 offers 4 table sizes up to 24 x 36 in. with capacities to 450 lb. Model 2210 features vertical vibration control and uses passive-air design that can be operated with optional hand pump. Model 2212 offers vertical vibration control, but uses self-leveling, active-air unit. Model 2214 offers multistage horizontal isolation feature in addition to vertical vibration control and uses self-leveling, active-air unit.

Service Network Inc.    Worcester, MA 01603
Nov 12, 2004 Available as replacement for ejector/locator loaders on HEALD CF grinders, Shuttle Loader System automatically loads and unloads bearing-type components and facilitates changeover between workpieces. Arrangement allows for continued use of HEALD style shoe mounting brackets. Featuring approximate load time from 1–1.5 sec, system has 3 knurled locking knobs for securing/releasing loader's front wall and making adjustments for workpiece width.

Sensoray    Tigard, OR 97223
Nov 12, 2004 Programmed with FTP server, 2411 Still Image Video Server consists of PC/104+ board stack programmed to capture single frames from composite sources such as radar, ultrasonic sources, and video cameras. Frame capture can be triggered from software command or external switch, and images are downloaded via Ethernet port. JPEG compression function allows use of internal storage via Compact Flash or internal hard drive. Typical compression factor is 20:1.

Curtis-Toledo, Inc.    St. Louis, MO 63133
Nov 11, 2004 Variable speed drive air compressors in AF Series employ TEFC motors and run at exact speed and operating pressure necessary to meet system air requirements. Any decrease in air demand corresponds to direct, linear percentage decrease in power consumption. Features include soft start motor control and color touch screen control, which is capable of calculating cumulative energy savings for each application or system served.

Quadro Engineering Corp.    Waterloo N2V1A1  Canada
Nov 11, 2004 Ytron(TM) XC incorporates and disperses powders into liquid stream with minimal air entrainment. Processing at ambient temperatures, dual-stage reactor generates vacuum that ensures wetting of powders while delivering discharge capacity of up to 40% by weight in one pass. Product characteristics are reproducible from batch-to-batch, and unit requires no plugging of screens. Sanitary-designed models have 3A, USDA approval and rated liquid throughput to 200 gpm.

Linde Lift Truck Corp.    Summerville, SC 29483-9621
Nov 10, 2004 Series EW, EWR, and ECR are 24 V walkie, walkie/rider, and center-ride pallet trucks, respectively. They are powered by GE SEM drive motors with class-H insulation and open ventilation. Control features include 2 or 3 speed limits, anti-rollback, regenerative braking, high-speed lock-in, and high-speed anti-tape down. Controls are programmable and feature diagnostic capability with stored fault codes. Soft-touch accelerator twist grips govern travel direction and speed.

M-Rock    Centennial, CO 80016
Nov 10, 2004 Featuring U-shaped lens cradles and thick, closed-cell foam, Everglade and Sierra bags protect SLR digital cameras with attached lenses up to 6 in. long while keeping weight off lens. They include triple protection rain flaps, zippers, and buckle closures, as well as water-resistant material and weather jacket for complete rain protection. Suited for long trips, bags offer non-pinching shoulder straps, neoprene handles, belt loops, and detachable compartments.

FKI Logistex North America    St. Louis, MO 63132
Nov 10, 2004 Accutronic(TM) provides positive transportation and true zero-pressure accumulation. Powered live-roller conveyor features 24 V electric stepper motor lift mechanism and automatic sleep mode. Detectors, built into photo-eye sensors, shut system down 5 seconds after sensing product jam. Operating at max speeds of 240 and 400 fpm, conveyor has weight capacities of 35 and 100 lb/ft. Operational modes include singulation, dual-zone, auto-slug, or slug.

Posi Lock Puller, Inc.    Cooperstown, ND 58425 0246
Nov 10, 2004 Made of cast steel with replaceable jaw plates, Model PHV859A is rated at 5 tons with 8 in. wide jaws that open to 8 in. It uses hydraulic pressure to close jaws and spring to open them. Foot-controlled pump offers hold and retract features along with air speed control valve to close jaws quickly or slowly for addditional safety. Hands-free operation facilitates repetitive applications.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Nov 09, 2004 Flexibility of AA1500 Spray Gun, combined with adaptable capabilities of Raptor Series Pump, produces finishing system that maximizes efficiency and comfort while minimizing operator fatigue-related problems. Spray gun's component cartridge facilitates changeovers and maintenance. Pump, able to work with lacquers, enamels, stains, sealers, and top coats, sprays light- to heavy-viscosity materials.

NJM/CLI Packaging Systems Int'l.    Lebanon, NH 03766 1403
Nov 09, 2004 Working at speeds to 30 cases/cartons per min, RFID Integrated Model 400 System utilizes Zebra RFID printer and verification scanner. Incorporated proprietary Model 400 Print and Apply Labeler automatically removes bad tags/labels prior to label application, while optional ancillary RFID antenna and reader lets system write to tags outside primary RFID printer. Downstream reader/verifier confirms applied tags are correct.