NJM/CLI Packaging Systems Int'l.    Lebanon, NH 03766 1403
Jul 23, 2012 Intended for solid dose pharmaceuticals, 426 AUTOCOLT labels up to 300 square, rectangular, or round bottles per min. System occupies 21 x 11 ft footprint and can apply wraparound or 3 panel labels as well as optional side- and/or top-serts. Accommodating containers from 1-9 in. high and 1-5 in. dia, labeler supports tool-free changeover in less than 25 min. Options include glue side-sert and/or top-sert applicators, continuous thermal transfer printing, and OCV/OCR vision inspection.

CABKA North America, Inc.    Hazelwood, MO 63042
Jul 23, 2012 Weighing 12.5 lb, Model CPP 100 can handle dynamic load capacities up to 2,200 lb. Actual load capacities depend on type of unit load, size of cases, and how it is secured to pallet. Optimized nesting ratio enables 53 ft long trailer to hold 2,340 pallets. For use in racks and/or double stacking, 3 snap-on bottom skids are available. Model CPP 100 will be also available made from 100% recycled plastics.

Forkardt International    Troy, MI 48083
Jul 20, 2012 For secure and accurate workholding, N.A. Woodworth ABL features Quick-Lock jaw mounting system along with non-metallic composite core. Chucks are available as 3-jaw, self-centering, or compensating systems in sizes from 6-18 in. dia. Various machine mounting styles, plates, and adapters are offered to match major machine structures and designs. While quick-change jaw design allows changeovers in less than 60 sec, Quick-Lock, no loose screw, style mount eliminates need for master jaw sets.

Schunk    Morrisville, NC 27560
Jul 20, 2012 Directly integrated into gripping center of PGN-plus Universal Gripper and MPG-plus Gripper for small components, OAS optical sensor continuously supplies control unit with information, such as how far away component is located, or if part is being securely gripped. IP65-rated sensor works with IR light at wavelength of 850 nm and operates from 14-131°F. Multi-functional device can be combined with other grippers and automation modules.

Dymax Corp.    Torrington, CT 06790
Jul 20, 2012 Utilizing pneumatic, NC diaphragm valve, Model 475 dispenses low- to high-viscosity fluids. Design of internal diaphragm and adjacent parts prevents migration of fluid into actuating section within valve, while diaphragm toughness and materials selection for component construction promote extended life between maintenance schedules. Along with 25 micron air filter regulator, features include integrated shutoff valve and pressure exhaust as well as stroke adjustment knob.

Sollega    San Francisco, CA 94110
Jul 20, 2012 Designed for flat commercial rooftops, InstaRack uses embedded bolts, pre-inserted channel nuts, and 5/16 x 7/8 in. standardized bolt size for every fitting to facilitate installation. All connections are made with impact driver. By performing grounding through bonding jumper, strut rail, and Wiley WEEB hardware, InstaRack minimizes grounding hardware, requiring only 2 grounding lugs at end of each row.

Graham Packaging Co.    Bradford, PA 16701
Jul 19, 2012 Used for ambient or cold-filled drinks typically sold in refrigerated section, stock 59 oz polyethylene terephthalate (PET) carafe has 38 mm finish and helps brand owners create differentiated shelf presence. Shape promotes grip and facilitates pouring, while square base lends to filling line stability. While PET construction exhibits shatter resistance and clarity, flat label panels provide display for product branding.

Kaeser Compressors, Inc.    Fredericksburg, VA 22404
Jul 19, 2012 Providing 900 cfm at 125 psig, 288 hp Mobilair(TM) M250 features Mercedes-Benz diesel engine and is designed for facilitated towing and maneuverability. Standard version weighs less than 7,000 lb, anti-frost valve maintains optimum operating temperature while also preventing tool freeze-up, and fuel tank size enables extended operation. Options include pressures to 205 psig and air treatment to meet demands of applications such as concrete repair.

Wilson Electronics Inc.    St. George, UT 84790
Jul 19, 2012 Designed to improve cell reception in vehicles such as cars, trucks, and boats, Sleek® 4G-V promotes better connections and reduces dropped calls. This all-in-one phone cradle and 4G signal booster, in areas with Verizon Wireless(TM) LTE service on 700 MHz band, ensures strong LTE signal as well as 3G and 2G signals. In areas not served by Verizon Wireless LTE, cell phone signal booster will amplify any existing signal on 800 and 1,900 MHz bands (except Nextel/iDEN).

Ekahau, West Coast    Saratoga, CA 95070
Jul 17, 2012 Plugged into ExpressCard slot, L4 Laptop tag works with real-time location systems that track and manage tags anywhere on campus with Wi-Fi coverage. Flat unit has built-in motion sensor, while tamper alert switch detects if tag is removed from laptop. Programmable tag, activated by keystroke, can report on fixed time interval and also detect and report power status of machine. Internal battery recharges from computer, running for several weeks if machine is turned off.

Rokform    Santa Ana, CA 92705
Jul 16, 2012 Made from high-impact polycarbonate, RokLock v3 allows users to mount iPad or iPad 2 just about anywhere, including car, boat, kitchen cabinet, wall, or tool box. Case includes RokGard(TM) screen protector and anti-slip hex grip inserts. In addition to standard mounts, variety of accessory mounts is available. Sold separately, Maglok magnetic mount kit fits behind anti-slip hex grips and uses 6 rare earth magnets to mount iPad to any magnetic surface.

Akro-Mils, A Myers Industries Co.    Akron, OH 44301
Jul 16, 2012 Available in single-sided, double-sided, and mobile options, 18 in. Deep Pick Racks are constructed of 16-gauge steel and offer high-density storage. Racks have weight capacity of more than 100 lb per shelf when secured to wall or floor. Single-sided rack has total capacity of 900 lb, while double-sided rack has 1,800 lb capacity. When used with optional heavy-duty Mobile Kit, double-sided rack also has 1,800 lb weight capacity.

Amacoil Inc.    Aston, PA 19014
Jul 16, 2012 To enhance load carrying efficiency of Uhing traverse drives and prevent them from slipping, linear bearing slide load carrier protects rolling ring bearings from undue wear by ensuring weight and radial forces are not transmitted to shaft-bearing interface. Load carrier, supported by end supports and guide rails, rides on linear bearings and accepts full force of any payload attached to Uhing traverse. There are 3 models available which mount on top or back of Uhing drive.

J. W. Winco, Inc.    New Berlin, WI 53151
Jul 12, 2012 Compliant with RoHS directive, GN 366 Series Handles feature elliptical tube and legs. Tubing is aluminum, available with plastic coated black textured finish or natural anodized finish. Offered in matte black or matte light gray, handle legs and cover caps are fiberglass reinforced technopolymer plastic. Tapped insert is zinc-plated steel.

ID Technology Corp.    Fort Worth, TX 76106
Jul 12, 2012 Suited for production floors with limited space, modified Model 250 Corner Wrap System is comprised of standard off-the-shelf IDT components mounted on custom face plate. Unit is fitted to 6 ft x 18 in. variable speed conveyor with guide rods. Configuration utilizes Model 250 modules and pivoting vacuum grid with attached follow along roller. Even with customized narrow aisle design, operators can access pneumatics, electronics, and other components.

Key Technology, Inc.    Walla Walla, WA 99362
Jul 11, 2012 Tegra 7755E features 30 in. wide platform with 4 cameras, each scanning full width of belt, to view product zone from 4 sides. It has metal-mesh catenary C-Belt® that allows objects to be seen from top and bottom, while close-coupled high-speed ejector system uses air jets to remove defective ones. Able to find 1-2 mm size defects, unit can sort up to 16,500 lb/hr. Sorter also includes KeyWare® Application Software that categorizes defects and foreign material on user interface.

Thiele Technologies, Inc.    Minneapolis, MN 55418
Jul 11, 2012 With footprint and component count that facilitate installation, Econo-Pal includes robot, end of arm tool, infeed, pallet locators, fence, and base plate. Step-by-step manual and menu-driven controls allow in-plant personnel to setup and operate unit, while robot teach pendant contains HMI screens designed to facilitate navigation and use. Standard features include quick change tool and infeed, drop box detection, and category 3 safety.

Reelcraft Industries, Inc.    Columbia City, IN 46725
Jul 11, 2012 Featuring steel enclosure, Series 5000, 7000, and 8000 protect hose from potentially harmful foreign debris. Removing cover on either side will allow access to majority of serviceable parts. Equipped with 4 nylon guide rollers, cast guide assembly guards hose from wear due to angular hose pull. Full flow shaft and swivel assure maximum product delivery.

Fisnar Inc.    Wayne, NJ 07470
Jul 10, 2012 Comprised of silicone-free, integrated dispensing components, QuantX(TM) system is manufactured using precision mold designs inspected to strict tolerance. Dynamically engineered components maximize performance in close tolerance dispensing, and syringe barrel provides gently curved path to dispense tip aperture for reduced resistance and increased material flow. Syringe barrels come in 3, 5, 30, and 55 cc volumes, together with accessories, which are color coded green.

Cyberoptics Semiconductor, Inc.    Beaverton, OR 97075 0276
Jul 10, 2012 Designed to meet future fab requirements, AVS450 Wireless Auto Vibration System travels through entire path of wafer to measure vibrations of wafer transfers in X, Y, and Z dimensions during semiconductor processes and fabrications. System reports real-time acceleration data so engineers can identify vibration anomalies. With Model AVS450, users can observe and optimize wafer, cassette, SMIF, and FOUP motions without exposing process areas to environment.