Jetline Engineering, Inc.    Irvine, CA 92618
May 05, 2005 CSC MIG welding controller utilizes controlled short circuit gas metal arc welding process to clear short circuits by retracting wire from short. Controller syncronizes wire feeder actions with power supply current to continuously feed wire alternatly between forward and reverse directions. Process helps to increase travel speed and eliminate spatter on wide range of materials including steel, stainless steel, galvanized steel, and aluminum.

Everhard Products, Inc.    Canton, OH 44707
May 05, 2005 Available in right- and left-handed models, seam roller reduces hand and wrist stress with cushion-grip handle. Offset extended fork increases space between roller handle and roller and promotes visibility of work area. Unit offers greater point-of-contact clearance due to distance between end of roller handle and work surface. Offset fork also lets users reach into tight spots.

Unisto Electronic Seals    South Wales   United Kingdom
May 05, 2005 Crypta® GateTrak® continuously monitors trailers from the time they are loaded until they are unloaded. Re-usable seals are fitted to vehicles or trailers and generate random seal number each time seal is closed. Seal number remains unchanged until seal is opened, enabling secured status of load to be remotely verified via RF transponder. Vehicle is automatically interrogated by system to determine load, veracity of seal, tractor ID, and driver ID.

PSI Peripheral Solutions Inc.    Mississauga, ON L5L 5Z4  Canada
May 04, 2005 Micro Rapid IN-Feeder intelligently inserts material into carton or tote or directly on product as it passes on conveyor. With feed rate up to 12,000 inserts/hr, unit offers variable speed capability, adjustable height mounting, and precision placement of product. Tip-On feeder handles material sizes to 7 x 9 in. and supports materials such as catalogs, paper, coupons, phone cards, credit cards, and others with load capacity up to 24 in. high.

Kinetic Systems, Inc.    Boston, MA 02131
May 04, 2005 Available in custom sizes or shapes with extra leg supports and cutouts or notches, 9300 Series provides omni-directional, ultra-low-frequency vibration damping as well as automatic leveling. It is composed of 2 in. composite layer between ½ in. top and bottom plates of corrosion-resistant steel. At up to 25,000 lb load, vibration isolation efficiencies can be as high as 98% for vertical natural frequency and 96% for horizontal natural frequency.

DTIC Dispensing Technologies    South Lancaster, MA 01561
May 04, 2005 Bench-top EZ-mix®FR2 utilizes positive displacement drive mechanism and fully integrated controller for dispensing from disposable cartridges with 0.1 ml accuracy. Equipped with 40-character LCD display and self-prompting commands, foot pedal actuated unit provides repeatable shots with smooth, pulse-free operation and no dripping. Run-on and lead-lag is eliminated. System dispenses 2-part materials ranging from water-thin to over 1 million cps.

Advance Lifts, Inc.    St. Charles, IL 60174
May 04, 2005 Offered in various capacities, sizes, and travels, combination lift and tilt table line of work positioners tilt bins of parts for order picking or position loads for assembly operations. Lift tables raise loads up and down for ergonomic positioning, while tilt tables position load up to 60°. Lift and tilt operations are individually controlled via joystick. Products use lifetime-lubricated bearings on all pivot points and have chrome plated axles and shafts.

CDF Corporation    Plymouth, MA 02360
May 04, 2005 Suited for mixing, pumping, and storing liquids, powders, or pastes, DrumSaverâ„¢ inserts protect steel drums from product while ensuring product purity. Straight-sided liners are available for use with follower-plates; accordion inserts feature flexible, pleated side walls; and combination inserts have straight-sided design with band of accordion pleats. Seamless, vacuum-formed products are secured with contoured lip snapped over open-head drum's top bead.

Mills Industries    Laconia, NH 03246 3351
May 04, 2005 Milplast™ stackable, interlocking tote is custom-designed to fit and protect parts while maximizing space utilization in manufacturing areas, shelves, and truck cubes. Measuring 90 x 16 x 20 in., products weigh 14 lb. and are offered with walls from 2.5–10 mm thick. Totes can include options such as part dividers, foam cushioning, custom imprinting, and color coding. Handholds are available to facilitate manual lifting.

Advance Lifts, Inc.    St. Charles, IL 60174
May 03, 2005 Comprised of 40 models, multi-stage lift tables are used to transfer loads between elevations and for machine feeding applications. Manufactured with lifetime lubricated bearings at all pivot points, products feature chrome-plated axles and shafts that inhibit rusting. Electric hydraulic power units are internal 2 hp or external 5 hp. Tables are offered with travels from 36–144 in., capacities from 2,000–12,000 lb, and platform sizes to 66 x 98 in.

Eriez Magnetics    Erie, PA 16506
May 03, 2005 Model HVF 2-mass vibrating feeder delivers flow rates to 100 fpm. With single-mass design, SM Conveyor moves loads of free-flowing materials up to 50 lb/ft³ at rates to 25 ft³/min. Tuned 2-Mass Model(TM) mechanical conveyor has 75 lb/ft³ and 35 ft³/min capacities, while Model HVC moves bulk materials up to 100 lb/ft³ at rates to 60 ft³/min. VMC Series Electromagnetic Conveyor has no sliding or rotating parts, no belts or bearings, and offers 60 fpm flow rate.

Warsaw Machinery, Inc.    Warsaw, IN 46580
May 03, 2005 Tyler® Endless Belt Hopper Feeder Model 4011 is 12 ft long and has fabricated steel frame with adjustable legs that allow for off-bearing height range of 32-37 in. Standard feeder capacity is ½-2 in. thick, ½-12 in. wide, and minimum of 8 in. long stock. Feeder has adjustable speeds from 50-200 fpm. Adjustable, pillow block mounted pulley maintains belt tension and tracking. Applications include feeding molders, sanders, and finishing equipment.

ChevronTexaco    San Ramon, CA 94583
May 03, 2005 ISOCLEANâ„¢ lubricates bearings, fans, electric motors, chains, slides, and guide-ways. It consists of reusable drive motor and replaceable canister. Unit can be set for discharge periods from 1–12 months, or dipswitch adjustable for every 100 hr of machine use. Volumes offered are 60, 120, and 250 cc; and operating temperatures range from 14–122°F. Electrochemical model is gas powered and is available as metal, plastic, and low temperature.

Pflow Industries Inc.    Milwaukee, WI 53209
May 02, 2005 Consisting of guide columns, carriage, and mechanical or hydraulic drive, custom Vertical Reciprocating Conveyors offer access to and from mezzanines, balconies, basements, and in-between levels in multiple story buildings. They can be utilized in exterior applications and in through-floor, interior applications, as well as conveyorized applications, high-speed production lines, and in place of inclined belt conveyors.

Superior Industries Of Morris    Morris, MN 56267
May 02, 2005 Available as portable or stationary units, Tunnel Reclaim Conveyors are manufactured in steel and come in rounded or rectangular box designs. Units can be accompanied by 8 or 10 ft domes, engineered with stress/shedding design. Applications include primary plant feed, wash plant feed, truck loadout, and live storage.

Henkel Loctite Corporation    Rocky Hill, CT 06067
May 02, 2005 Pneumatic Loctite® Low Viscosity Fluid Pumps deliver various output volumes determined by pump ratio and input pressure. Carbon-steel system with Viton seals suits lubricants, epoxies, and urethanes, while inert metal system with EPR seals suits anaerobics, acrylics, epoxy hardeners, and water-based products. Loctite® High Viscosity Paste Pump Systems consist of air motor, pump tube, and pressure ram, and offer chemical compatibility with adhesives, sealants, and lubricants.

FKI Logistex North America    St. Louis, MO 63132
Apr 29, 2005 Horizontal Carousels utilize ac drives and standardized track design, which enables use of different sized product shelves on same carousel track. Units are configured for single operator to pick from pod configuration of 2, 3, or 4 carousels. SpectrumPlus(TM) warehouse control system provides reporting and inventory management functions for control of carousel induction process, inventories, and product replenishment.

ControlAir Inc.    Amherst, NH 03031 2315
Apr 29, 2005 Miniature Electropneumatic Type-550X converts variable signal to proportional pneumatic output. Built-in volume booster provides up to 20 scfm air flow capacity. Standard and zero-based units utilize input signal of 4–20 mA. Output pressure for standard range includes 3–15, 3–27, 6–30, 2–60, and 3–120 psig, while zero-based range outputs include 0-30, 0-60, and 0-120 psig. Regulator features NEMA 4X housing and is approved for intrinsically safe applications.

JLG Industries, Inc.    McConnellsburg, PA 17233 9533
Apr 28, 2005 Tow-Proâ„¢ Model T350 has 35 ft platform height with 20 ft horizontal reach, while Model T500J has 50 ft platform height that includes a 4 ft jib boom with 130° vertical motion and 30 ft horizontal reach. Both machines feature 370° turntable rotation and have 500 lb capacity in 30 x 48 in. aluminum platform. Power is provided by 24 V, 220 Ah batteries or from optional 9 hp engine. Other features include surge brakes, parking brakes, hour meter, and tilt alarm.

Seatek Co., Inc.    Stamford, CT 06902 5852
Apr 27, 2005 MM-175 Mighty-Miterâ„¢ consists of vee-shaped vise that secures product to be cut and clamping system that can adjusted to accept material from 3/16–2 in. Attached to Milwaukee® or DeWalt reciprocating saws, vise and clamping assembly swings up towards reciprocating blade to facilitate cutting of any material at right angle. Clamping bar has chamfer at tip to permit clamping of small rods and grooved portion to prevent round material from slipping.