Steinmeyer Inc.    Bedford, MA 01730
Apr 18, 2011 Built with components and hardware selected for ultra high vacuum use (10E-10 torr), model MT105-LM-HV 2-axis (XZ) stage is available with 30 or 50 mm travel. Positioning accuracy is 3 microns, with repeatability of ±0.2 micron. Product can also be provided as classic XY stage without adapter plate or configured as XYZ system. Driven by piezo motor, each stage includes stainless steel crossed roller linear bearings as well as base and saddle manufactured of high-stiffness aluminum.

Packnet Ltd.    Eagan, MN 55121
Apr 15, 2011 Buckhorn Maximizer(TM), featuring integrated pallet and lid system, enhances efficiency of light-duty dry goods shipping and storage. Able to fold flat and fit within its own footprint, one assembled unit stores up to 8 collapsed boxes. One-person assembly and breakdown takes seconds; 2 drop-down doors promote access and ergonomics; and wall assembly eliminates need for tools. Made of moisture-resistant plastic, stackable packaging system integrates locking system and 4-way forklift entry.

Round, David, & Son, Inc.    Streetsboro, OH 44241
Apr 14, 2011 Roto-Mate(TM) Jib Crane Motorization products are offered in stainless steel for sanitary and cleanroom use. Providing powered rotation to all makes of free-standing jibs, systems accurately position up to 5 ton loads with pushbutton control. Products help avoid movement of boom due to vibration or uneven floors, and include friction drive which locks jib in place, eliminating drift and collision risk. Jib motorization can also eliminate hoist side-loading and machinery damage.

ControlAir Inc.    Amherst, NH 03031 2315
Apr 13, 2011 Accommodating applications requiring pressure control under variable operating conditions, Type-90 provides tight regulation and repeatability to valves and other automatic control equipment. Effect of supply variation is less than 0.5 psig for 100 psig change. Along with 2 gauge ports, reversible bracket, and pressure ranges up to 120 psig, regulator offers 14 scfm flow capacity at 150 psig supply with 120 psig output and 7 scfm exhaust capacity with downstream 5 psig above set point.

Memory Protection Devices    Farmingdale, NY 11735
Apr 13, 2011 Model BH-18650-W battery holders have stainless steel pressure contacts with 24 AWG wires and 6 in. leads, while BH-18650-PC units have PC tail contact for applications requiring pulse or burst of energy to flow through them. Both accept 3.7 V Li-Ion 18650 batteries with protection circuit module, as well as CR2/3A lithium batteries in series connection for 6 V output. Measuring 78 x 21 x 22 mm, they can be mounted via recessed mounting holes and eyelets, or with adhesive or double-sided tape.

Bosch Packaging Technology    New Richmond, WI 54017
Apr 13, 2011 With production rates of up to 120 pieces/min, ARF 1010/1020 offers pharmaceutically safe filling and closing of ampules and injection bottles. Unit includes 2 gassing stations, 2-position filling station, and digital flowmeter for reproduction of flame regulation to close ampules. Pivoting motion of removal grippers is towards back of machine, minimizing disturbance of laminar flow over opened ampule during melting. Optionally, unit can fill ampules and injection bottles in combination.

Thern, Inc.    Winona, MN 55987
Apr 12, 2011 ATLAS II worm gear power winch has 2-ton load capacity for handling small- and medium-sized loads and is suited for industrial lifting applications. Compact, lightweight winch features cast aluminum body, internal load holding mechanical brake, and machine-cut gearing that operates in enclosed oil bath to minimize wear. Lifting handles are built into frame, so lifting straps can be attached to simplify movement around worksite.

Industrial Conveying (Aust) Pty Ltd    Victoria 3552  Australia
Apr 11, 2011 Custom designed and manufactured automated dock handling solutions create safe working environment for bulk loading/unloading of palletized product into shipping containers. Vehicle/container is raised to correct height for loading with powered docks, and skates are constructed to allow minimum sideways movement of load. Powered and gravity-fed dock loading systems can be coupled with options such as RFID, PLC, scanning, sensors, barcode systems, and other technologies.

Southworth Products Corp.    Portland, ME 04104 1380
Apr 11, 2011 For assembly or maintenance operations where large structures, such as aircraft or heavy equipment, must be accessed at elevated or varying heights, Custom-Configured Lifts can be designed into production lines. Scissor lifts are available in stationary or movable configurations with variety of platform sizes and lifting ranges to meet application-specific requirements. Options include soft start/stop, indexed lifting and lowering, fold-down safety gates, and bellows skirting.

Bosch Packaging Technology    New Richmond, WI 54017
Apr 08, 2011 Designed as product infeed unit for horizontal flow wrappers, Intelligent Transport System (ITS) balances out product flow irregularities, creates defined spaces, and synchronizes product and film speeds. This ensures careful product transport of sensitive and non-accumulable food and confectionery products. Able to achieve max output of 1,400 products/min, compact and modular system accommodates new formats via button actuation and without requiring changeover time.

Bobcat Company    West Fargo, ND 58078
Apr 07, 2011 Offering switch-actuated all-wheel (AWS) and skid-steer drive options, A770 suits applications requiring low ground disturbance, reduced tire wear, and fast travel speed as well as maneuverability. Features include vertical lift path, 132 in. lift height, 31.5 in. reach, and 42° dump angle. With 12.6 turning dia in AWS mode and 7.2 ft in skid-steer mode, loader employs 2-speed transmission and has 12.3 mph (high range) and 7.1 mph low range travel speed.

BinMaster    Lincoln, NE 68507
Apr 07, 2011 Offering real-time bin level monitoring for solid materials, BinView is comprised of SmartBob2 or SmartBob-TS1 sensors mounted on bins, wireless or wired data communications network, gateway for connectivity to PC or IP network, and data collection software. Latter can be viewed securely by any authorized individual via Internet or company LAN/VPN. System eliminates manually checking while promoting efficiency of ordering and logistics for all types of operations.

Round, David, & Son, Inc.    Streetsboro, OH 44241
Apr 07, 2011 Suited for cleanroom material handling, Lab-Lift(TM) Strap Hoist features highly polished finish and urethane-coated, lubrication-free lifting strap, which eliminates particulate contamination associated with chain hoists or wire rope hoists. Hoist mechanism is enclosed in smooth-sided polished 304 stainless steel enclosure for washdown. To further reduce potential contamination, welds are smooth-ground, faces are flush-mounted, and fasteners are plugged.

Proco Machinery Inc    Mississauga, ON L5T2V5
Apr 07, 2011 Offering operational flexibility for bottle manufacturers, Multipak Palletizer Packaging System includes automatic pallet feed magazine that stores and feeds pallets onto integrated pallet conveyor. Additional features include automatic slip sheet and top frame magazines. Operating in semi- or fully automatic modes at line speeds up to 150 bottles/min, modular system can handle half or full cube pallet sizes up to 105 in. high or be configured to support trays and boxes.

Air Technical Industries    Mentor, OH 44060
Apr 06, 2011 Designed for indoor/outdoor use, Tele-Mast hydraulically operated crane can carry loads up to 50,000 lb through 12 x 12 ft overhead door and straddle flat bed or semi truck. Four telescopic masts are synchronized for level as well as uniform lifting and positioning, and dual wide-flanged I-beams are equipped with 4 laterally adjustable lifting hooks. Able to lift loads up to 120 in., crane travels on 16 polyurethane wheels to protect floor from damage.

Kurt Manufacturing Co., Industrial Products Div.    Minneapolis, MN 55413 1540
Apr 06, 2011 Consisting of high precision pins, bushings, and liners that provide locating repeatability up to ±.005 in., PinLock(TM) System facilitates attachment and removal of fixtures, subplates, and vises from machining centers. Helical extraction design aids in overcoming binding in side load conditions. Precision machined of heat-treated, alloy steel with black oxide finish, liner bushings are available for fixture plate thicknesses of 0.75, 1.00, 1.50, and 2.00 in.

Tingue Brown & Co.    Saddle Brook, NJ 07663
Apr 06, 2011 Waterproof and washable Elastoliner create sanitary barrier inside laundry carts, trucks, baskets, and hampers to prevent cross-contamination from soiled laundry during transit or storage. Also suited for protecting clean linens from contamination due to contact with interiors, these custom-sized cart liners are manufactured from 100% nylon in choice of 200 or heavy-duty 430 Denier with internal elastic cord for gripping rim and maintain shape.

Bobcat Company    West Fargo, ND 58078
Apr 06, 2011 Model S750 skid-steer loader features 11 ft of vertical lift, 23 gpm standard hydraulic flow, operating weight of 8,730 lb, and rated operating capacity of 3,200 lb. Loader is powered by 85 hp turbo-diesel engine and has cab-forward design that provides visibility in all directions. In addition to keyless start that helps prevent theft, cab features include 5 in. color LCD and instrumentation panel that intelligently monitors key loader functions.

Bobcat Company    West Fargo, ND 58078
Apr 06, 2011 Powered by 85 hp turbo-diesel engine, T750 has rated operating capacity of 3,325 lb, lift height-to-hinge pin measurement of 132 in., 23 gpm standard hydraulic flow, and operating weight of 10,327 lb. Panel intelligently monitors key loader functions, and keyless start helps prevent theft. Mounted directly to front plate of lift arm, auxiliary hydraulic quick couplers provide solid mounting, and cab-forward design promotes visibility in all directions.

Bunting Magnetics Company    Newton, KS 67114 0468
Apr 06, 2011 Eddy Current Separator (ECS) utilizes rotor that maximizes gauss intensity on belt surface and provides optimal separation of non-ferrous materials. Along with urethane belt and carbon fiber epoxy shell, low-profile and streamlined design features eccentric core intended to be rotated to provide effective product throw based on material and application. Rubber-lagged inverter-duty motorized drive pulley at in-feed provides driving force and variable speed (100-300 fpm) operation.