EnerSys, Inc.    Reading, PA 19612-4145
Dec 02, 2005 Designed for DataSafe(TM) HX valve-regulated lead-acid (VRLA) batteries, DataSafe HX Cabinet System optimizes installation of UPS systems for various data support applications. Cabinets are UL 1778-listed and approved for UBC seismic zone 4 installations. Pre-wired at factory, products feature hinged front doors, removable rear panels, several knockout locations, and dual dc rated fuses. Options include circuit breakers and castors.

O.BERK Co.    Union, NJ 07083
Dec 02, 2005 High-density polyethylene Oblong and Oval Bottles are offered as HD Narrow Mouth Oblongs from 1.0-16 oz as well as HD/LD Narrow Mouth Ovals from 0.5-12 oz. Made of polyethylene, polypropylene, PET, or PVC, additional bottles are available in round and square shapes in sizes from 1/8-128 oz for pharmaceutical, nutraceutical, and medical industries. Child-resistant and standard continuous threaded closures are available with all commercial liner materials.

Kolinahr Systems, Inc.    Cincinnati, OH 45242
Dec 01, 2005 Utilizing heavy-duty, 4-post steel frame, Model PS600 is designed to stack unit loads without pallets. It mounts on one side of unit load conveyor and holds stretch wrapped loads in position with positive stop gate. Linear rails and bearings move multiple support bars between rollers under unit load, which is raised and lowered with variable speed electric drive system. Stacker is controlled by PLC, which can communicate with conveyor, stretch wrapper, and unitizer.

Elscint Automation    Pune 411026  India
Nov 30, 2005 Attached ahead of grinding machine where magnets are ground, Magnet Stacking and Loading Machine can stack 30 magnets/min on trays. Controlled by Siemens PLC, system includes 3 conveyors and is housed on table with all electrical and pneumatic circuitry inside or below table, leaving top portion free for placing empty and full trays. All faults and problems are highlighted on MMI, and separate indicative LEDs are given for each one.

Cogiscan, Inc.    Bromont, QC J2L 2N8  Canada
Nov 30, 2005 Compatible with SIPLACE® feeders and placement machines, RFID Smart Feeder retrofit kit installs on any machine in field for models S, F, HS, HF, and C-series. Kit converts feeders to smart feeders by adding RFID tag to each feeder. RF antenna and reader is mounted on each machine feeder bank (changeover table) and/or feeder storage cart to automatically detect RFID and precise location of each feeder in each feeder slot.

Key Technology, Inc.    Walla Walla, WA 99362
Nov 29, 2005 Suited for updating electronics and optics in Key legacy sorters up to 20 years old, G6 Upgrade Package includes advanced vision engine, color and VIS/IR cameras, as well as CameraLink, FireWire, and Ethernet broadband connectivity standards. Image Processing Module features FPGA chipset, which puts power of entire electronic rack in single chip. GUI resides locally on system's controller but can also be accessed remotely via network or Internet.

Multifeeder Technology, Inc.    St. Paul, MN 55110
Nov 29, 2005 Dual-stage MFT friction feeders utilize AccuTipping software, which enables placement of items into or onto other items at feed rates to 70,000/hr. Standard 30 in. tall vertical infeed magazine facilitates loading of products, and optional 6 ft long horizontal magazine is also available. Offered with 5 discharge lengths, feeder can be added to existing production lines and can also be integrated with labelers and laser coding equipment.

Distech Systems, Inc.    Rochester, NY 14606
Nov 29, 2005 Compatible with most machine tools, Model DS1200-MTL uses robotic technology to load and unload parts. It accepts stacks of trays from carts, eliminating operator lifting. From position next to machine tool, robotic arm feeds parts directly into chuck, spindle, fixture, or machine tool's internal loader. Model DS1200-MTL is also capable of performing secondary operations such as part washing, packout, and stacking.

Micro Air Clean Air Systems    Wichita, KS 67205
Nov 29, 2005 Micro Air® downdraft table and backdraft hood system provides quiet, adjustable dust collection. Available with equipment that removes up to 99.999% of dust created during metal grinding operations, downdraft table/backdraft hood system can be custom-engineered according to end-user needs in terms of size, power, and aesthetics. Roto-Pulse(TM) cartridge cleaning system reduces maintenance time through cleaning 100% of filter cartridge area.

Physik Instrumente (PI)    Auburn, MA 01501
Nov 29, 2005 Featuring direct metrology capacitive sensors, monolithic Nanopositioning Stages deliver resolutions of less than 0.1 nanometer and up to 3 kHz resonant frequency in package smaller than matchbox. Zero-friction flexure guiding system provides nanometer level straightness. For interchangeability of nanomechanisms and controller, stages are equipped with ID chips, which hold all calibration data and send it to digital controller when powered up.

Pass & Seymour/Legrand    Syracuse, NY 13221
Nov 28, 2005 Designed for use with ½ or 5/8 in. wallboard, 22.5 in.³ Steel and Wood Stud Boxes accept eleven No. 14, ten No. 12, and nine No. 10 wires. Bracket countersink allows for No. 8 wafer head or dry wall screws with minimal wallboard bow. Classified for 2 hr wall and ceiling fire resistance, products have Height Site alignment guide and box levelers. Wood Stud Box offers hands-free positioning with EZ Grip(TM), and box dimensions are 3.75 x 2.25 x 4 or 4.25 in.

Rexnord Industries, LLC    Milwaukee, WI 53214
Nov 25, 2005 LPC® 1050 and LPC® 1055 TableTop® chains have low pin centerline design (LPC) that eliminates product tippage on multi-strand conveyors, without need for magnetic corner tracks. Pitch length and top plate thickness resist chipping and breaking via LPC corner retention technology, and chains can be lifted up anywhere in carry track for cleaning and maintenance. Offered in 0.34 and 0.50 in. flight thicknesses, chains come in PS(TM) wear-resistant material as well as HP(TM).

PIAB Vacuum Products    Hingham, MA 02043
Nov 25, 2005 Silicone- and textile-free, hygienic Vacuum Conveying Systems prevent dust and fine particles from escaping into air and can also be used to collect residual powder that falls from part surface. Modular, flexible units are powered by pneumatically driven vacuum pumps and can transport up to 15 tons of material per hour. Made of AISI 316L SS, conveyors are available in diameters of 21, 33, and 56 cm and include filters capable of trapping particles down to 0.3 microns.

Pentalift Equipment Corp.    Buffalo, NY 14240 1510
Nov 23, 2005 Designed to position parts within reach of worker during unloading/loading of containers, Drive-On Ergonomic Bin Tilter offers platform sizes from 38 x 40 in. to 50 x 48 in. and tilt capability up to 85°. Beveled front edge on platform enables smooth entry and exit of manual pallet truck during positioning. Tilter is equipped with electro-hydraulic power unit, pre-wired NEMA 12 TENV motor, push-button controls, and lubricated-for-life bearings.

Colder Products Co.    St. Paul, MN 55114
Nov 22, 2005 Suited for use in food and liquid dispensing systems, Disposable Universal Dispensing Coupler (DUDC) bag-in-box fitment incorporates foil seal that protects product contents and provides evidence of possible tampering. IdentiQuik(TM) DUDC model, also available, incorporates RFID tag in closure. All models have thumb latch and audible click that indicates secure connection. This 38 mm DUDC fitment features silicone seals and 316 stainless steel springs.

Juki Automation Systems    Morrisville, NC 27560
Nov 22, 2005 Suited for SMT manufacturers, IFS-X system uses RFID technology as primary communication method between feeder and assembly machine to track components from initial receipt through placement. Traceability is conducted by intelligent feeders, which store component data such as part number, quantity, and lot number. Date and time board was assembled are also traced. Through automated part recognition, closed-loop system minimizes setup time and prevents human errors.

Powell Systems, Inc.    Fowler, IN 47944
Nov 22, 2005 Designed to eliminate potential injury from manual lifting and stacking of boxes onto shipping pallets, NO-LIFT comes with scissor-lift, transfer tables, and all necessary controls. Boxes from infeed conveyor are positioned on ball transfer table to form layer. Once layer is full, operator pushes button, and NO-LIFT neatly stacks boxes and lowers pallet for next layer. When full, pallet is removed via lift truck, and machine is ready to raise another pallet for loading.

Diamond Phoenix Corp.    Lewiston, ME 04241
Nov 22, 2005 Vectura Storage and Retrieval Machine (SRM), configurable to meet application requirements, can employs single- or double-masted cranes with ability to handle single, double, triple, or multi-deep storage, one or multiple loads at a time. Aisle-based system offers aisle transfer, tailored load handling, and cold storage capabilities as well as various I/O alternatives. Pallet conveyor systems, also available, are based on modular design.

Lista International Corp.    Holliston, MA 01746
Nov 21, 2005 Nexus(TM) Flow Rack uses gravity to deliver parts, components, and cartons for picking, kitting, or assembly in material handling applications. It accept any Nexus System accessory, including shelves, lights, power, and articulating arms. By adding worksurface and casters, Flow Rack becomes mobile workstation. Product measures 86¼ in. high x 48 in. deep and is available in 30, 36, 42, 48, and 60 in. widths.

Pass & Seymour/Legrand    Syracuse, NY 13221
Nov 21, 2005 Measuring 4.25 x 4.25 x 1.25, Shallow 4-Inch Square Box is classified for 2 hr wall fire resistance and suited for masonry-furring strip style walls. Dual No. 8 screws facilitate RC1, RC2, or 4SBC mud ring installation, while 4 Auto/Clamps® eliminate need for separate cable clamps. Height Site alignment guide helps center device on reference mark. With 18 in.³ volume, product accepts 9 No. 14, 8 No. 12, or 7 No. 10 wires and can be used with ½ or 3/8 in. wallboard.