ACE Production Technologies    Spokane Valley, WA 99216
May 03, 2011 Operating without any mechanical adjustments, KFS-VAF Volumetric Atomized Flux Applicator controls and dispenses atomized flux material on demand via programmable control system. Spray volume and width is determined and set by user-programmed parameters; varying amounts of coverage can be accomplished as needed on same PCB in process. Suited for use with all fluxes, even up to 33% solids, system can be integrated with KFSDJ Drop Jet Fluxer for dual technology capability.

Eriez Magnetics    Erie, PA 16514
Apr 29, 2011 Eriez® Aftermarket Model PM Rare Earth Drawer Magnets capture and hold fine and weakly magnetic particles, preventing plugged valve gates, machine damage and equipment downtime. Available in 4 sizes, products install in less than 5 minutes and feature guide-rod design that enables use with mild steel housings. Magnets can handle resin temperatures up to 250°F, and close tube spacing lends to effective ferrous removal.

J. W. Winco, Inc.    New Berlin, WI 53151
Apr 28, 2011 Suited for elastic mounting of machine units such as motors, compressors, and pumps, RoHS-compliant series GN 351 features natural rubber body, vulcanized, with 55 durometer (±5° shore hardness). Variations include those with 2 tapped holes, 1 tapped hole and 1 threaded stud, or 2 threaded studs. Steel cover plate is zinc plated, blue passivated, and molded in, as are tapped inserts or threaded studs. Sizes and dimensions allow use in diverse applications requiring vibration isolation.

Thomas Products Division    Sheboygan, WI 53081
Apr 28, 2011 At 8.32 x 6.75 x 4.08 in. and 6.8 lb, 2450Z Series employs variable-output, brushless, 140 V DC motor that conserves power and energy by matching compressor output to application requirements. Unit produces 50 dB(A) @ 20 psi and features balanced stroke design and center-line of gravity mounting for minimal vibration. Oil-less, RoHS-compliant compressor, with permanently lubricated bearings and WOB-L® piston technology, is rated for 3.3 cfm max flow @ 2,200 rpm and 35 psig max pressure.

Slideways, Inc.    Worcester, MA 01605
Apr 26, 2011 Heavy-duty SlideRails provide low-friction service in accumulators and combiners. Made from acetal, white beads have operating temperature of 180° suited for serving range of applications. Channels, made from 10-gauge stainless or galvanized steel, utilize 304 stainless steel pins with glass-filled nylon pin rails. Products are designed with 2 in. fastening key slots for 3/8 in. carriage bolts and are on 12 in. centers. Heights of 2 and 3 in. and lengths from 2-10 ft are available.

O.BERK Co.    Union, NJ 07083
Apr 26, 2011 Available in 8 sizes from 1-16 oz, Beveled Square Collection is suited for moisturizers, body lotions, suntan, and other skin care products. Any size may be paired with choice of closure: screw caps, flip tops, or spray pumps. Decorating options, from frosting to hot stamping and labeling to silk-screening, enhance retail presence and are performed to exact customer specifications.

IntelLiDrives Inc.    Philadelphia, PA 19152
Apr 26, 2011 Constructed of anodized aluminum, RTLA-130 features micro-step drive that enables angular speed up to 20°/sec and double row of preloaded bearings that allow for off-center loads. Device offers load capacity of 50 kg and travel range of 360° with 0.001° resolution and 0.005° repeatability. Measuring 240 x 240 x 62 mm, stage is equipped with precision ground and hardened worm gear, 2-phase stepper motor, and Omron optical home sensor.

Semi-Gas Systems, Inc.    San Jose, CA 95112
Apr 26, 2011 SEMI-GAS® Cabinet controls supply of several process gases to multiple points of use, or tool chambers, from internal and external source supplies. Gas source and distribution system automatically performs purging and continuously monitors system conditions. It features 12 in. color touchscreen for system control, self-closing and self-latching door, UL-approved sprinkler, and viewing window with ¼ in. thick glass. Constructed of welded 11 ga steel, unit measures 40 x 23 x 86 in.

CUI, Inc.    Beaverton, OR 97005
Apr 25, 2011 Suited for use in consumer electronics and electrical equipment, PJ-06xA and PJ-06xB series have center pin diameter of 2.1 or 2.5 mm and OD of 5.5 mm. Contact resistance is 30 mW max, and insulation resistance is 100 MW min @ 500 Vdc. Able to withstand 500 Vac RMS for 1 min, products have voltage rating of 20 Vdc at 5 A. Options include long bushings, locking nuts with washer, and pins designed to solder directly to wire leads or PCBs in vertical and right-angle orientations.

Kurt Manufacturing Co., Industrial Products Div.    Minneapolis, MN 55413 1540
Apr 25, 2011 Equipped with Anglock® feature that minimizes part lift, MaxLock(TM) 350 holds parts with up to 10,000 lb clamping force at 60 lb-ft input torque for max rigidity and close tolerance repeatability in all axes. It enables obstruction-free, high-speed machining in all 5 axes and is constructed with steel components. Featuring 0.625 in. stroke, vise is adjustable to handle any desired clamping length. Available screw lengths are 8, 12, 18, and 24 in., and jaw opening ranges from 0.5-15.5 in.

Creform Corp.    Greer, SC 29652-0830
Apr 25, 2011 Flow rack has ergonomic design and drop-in low-friction roller tracks suited for use with carboard boxes or totes with soft bottoms or open cell designs. Featuring 750 lb capacity and 42 x 78 in. footprint, product includes six 4 in. dia urethane casters, and aluminum roller tracks available in 6, 9, 12, and 15 in. widths, with roller spacing at 1, 2, or 3 in. centers and lengths up to 12 ft. Boxes and totes are angled in supply lanes to optimize viewing and picking.

Double R Industries Inc.    Boyden, IA 51234
Apr 25, 2011 Consisting of 3 self-contained models, Powerjack System(TM) is capable of lifting loaded trailers with hitch weight of 3,500 lb or 7,500 lb per leg. Units are available with 10,000 psi hand pumps for manual use or 10,000 psi air-powered hydraulic pumps. Mechanical locking stand allows parking with no settling and no pressure on any hydraulic components. Suited for construction and utility industries, jacks support trailers with capacities from 10,000-60,000 lb.

Genevieve Swiss Industries, Inc.    Westfield, MA 01085
Apr 25, 2011 EZR Swiss clamp system is available with EZR Swiss clamp nuts, EZR wrench adaptor, EZR torque nut adaptor, and spanner wrench. System eliminates wrench slippage and losing clamping nuts in machine sump/chip bin. Standard box wrenches or 3/8 in. drive ratchet wrench with either EZR wrench adaptor or EZR torque adaptor help in tightening clamp nuts.

Columbia Machine Inc.    Vancouver, WA 98661
Apr 25, 2011 With Model LTS-C, fork truck driver can place go-to pallet onto pallet cart allowing process to complete automatically. Unit can transfer products that are packaged in cases, barrels, drums, bags, and pails from one pallet type to another, including Plastic, Chep, and GMA pallets that are commonly used in receiving and shipping applications. Transfer station helps eliminate worker injury, streamline warehouse operations, and optimize cleanliness.

Essemtec Ag      Switzerland
Apr 25, 2011 Requiring 20 mm of space on feeder rack, double 8 mm Cobra Feeder handles paper and blister tapes and allows tape splicing. High-precision indexing wheel moves component tape forward, enabling 4 mm indexing in 60 ms. Position of wheel and tape is measured directly on indexing finger, and tolerances of indexing wheel are registered and electronically compensated. To ensure continuous, jam-free operation, Cobra Feeder features active retracting of tape and cover tape.

Round, David, & Son, Inc.    Streetsboro, OH 44241
Apr 22, 2011 Designed for use within controlled environments found in pharmaceutical manufacturing, Ruger Industries all-stainless steel lift tables feature protected hydraulics and polished finish to facilitate wash-downs. External surfaces are entirely paint-free, meeting mandates of many drug makers for clean room equipment. While providing ergonomic benefits, tables come in capacities up to 2,000 lb and have respective raised and lowered heights of 42 and 18 in.

Coxreels    Tempe, AZ 85283-4323
Apr 22, 2011 Equipped with stainless steel external full-flow swivel and chemical-resistant Viton® seals, DEF Hose Reels come in SH Series heavy-duty single pedestal models or T Series supreme-duty dual pedestal versions that handle up to 75 ft of ¾ in. hose and up to 50 ft of 1 in. hose ID. Both are outfitted with Super Hub(TM) dual axle support systems to optimize stability and minimize vibration during operation. Standard spring retraction and EZ-Coil® controlled retraction systems are available.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Apr 22, 2011 Offered in single, double and 3 pole versions, with or without LED blown fuse indication, UL approved DIN rail mount ASI fuse holders accept Class CC and midget fuse up to 30 A at 600 V. Lever in unit helps user to insert and remove fuse from circuit, whereas screw clamp box connections make ASI fuse holders easy to install. Holders are IEC standard compliant.

VEROTEC Inc    Londonderry, NH 03053
Apr 19, 2011 Designed to accommodate electronic, electric, and electro-mechanical equipment, Veroshield Rack Case comes in 3 sizes: 1U high x 10.4 in. deep, 2U high x 14.4 in. deep, and 3U high x 14.4 in. deep. Typical attenuation figures are in excess of 110 dB up to 10 MHz, falling linearly to 40 dB at 1 GHz. Constructed from 0.9 mm zinc-plated steel, case maintains electrical conductivity throughout. Additional 19" aluminum front panel, external to screened enclosure, is provided to optimize appearance.

WinWare, Inc.    Marietta, GA 30067
Apr 19, 2011 Suitable for managing tools, spare parts, or any indirect material at point of use, CribMaster AccuCab2D consists of heavy-duty, double-walled cabinet with 4 internal RFID antennas and electronic door locks. Touchscreen monitor enables user to identify themselves, or they can scan employee badge. Suitable for offices or laboratories, it features lightweight doors and shelving that adjusts automatically when inventory is removed. System is managed using CribMaster software.