Yale Materials Handling Corp.    Greenville, NC 27834
Mar 31, 2006 Available in 3,000 and 3,500 lb capacities, NTA-SB man-up turret truck is powered by service-free ac motors and offers 55 ft max lift height. Features include Smart Guide continuous height sensing, auto deceleration braking system, and soft touch electronic steering. In addition to barrier-free open compartment and direct gear steering, unit features seat-side joystick controls and adjustable operator console for operator ergonomics.

Belden CDT    Fort Mill, SC 29715
Mar 30, 2006 Available for commercial network installation, Belden IBDN Cable Management Solutions help house, store, and protect data hardware and equipment and supply discrete components designed to simplify cable handling and routing. Products include floor- and wall-mount enclosures and racks of standard and custom design; standard or weather-resistant, nylon and Velcro cable ties; and Belden IBDN Surface Raceway System for wire enclosure applications.

OTEC Precision Finish, Inc.    Acton, MA 01720
Mar 30, 2006 Using low abrasive media such as sintered ceramic chips, CF-oil system meets demands for smooth surfaces of workpieces subject to mechanical stress in miniaturized assemblies. It is aggressive enough to remove micro-burrs on work pieces without compromising dimensional integrity achieved through final grinding/honing and requires no water connection. Centrifugal disc finishing machine utilizes PLC automated process and eliminates possibility of corrosion.

Creform Corp.    Greer, SC 29652-0830
Mar 30, 2006 Developed using Creform® System of pipes and joints, compound angle flow rack is suitable for workstations, assembly points, loading posts, kitting locations, and other point-of-use part offloading locales. Flow rack's conveyor surface is sloped lengthwise from load to work area end for gravity fed container flow and second angle leans it toward user for tote presenting. Design can incorporate empty container return lane.

Bimba Manufacturing Co.    Monee, IL 60449 0068
Mar 30, 2006 Designed for maximum air pressure input of 125 psi, High Flow Booster 2:1 is available in 4 in. bore size that results in maximum cylinder output pressure of 250 psi. Compact design, with body and center section made of aluminum hard coat with PTFE, suits applications with limited space. Product handles operating temperatures from 15 to 160°F and is designed for intermittent use, such as maintaining pressure in reservoir.

JLG Industries, Inc.    McConnellsburg, PA 17233 9533
Mar 30, 2006 JLG® Model 20MVL mobile vertical lift includes clutch-free gearbox, drive motor, controls, and battery charger designed for construction, maintenance, and retail applications. Able to be driven at 19 ft 6 in. platform height, lift features 26 x 28 in. platform with 350 lb capacity and provides drive speed up to 3.5 mph. With interlocked controls, automatic pothole protection system, and 1.5° tilt alarm, Model 20MVL ensures safety.

JLG Industries, Inc.    McConnellsburg, PA 17233 9533
Mar 30, 2006 Model E26MJ, E18MJ, and E33MS mast-style boom lifts include jib boom that extends platform away from mast. Model E26MJ is electric powered, has non-marking, lugged tires for both inside and outside operation, and features 26 ft 2 in. platform height, 7 ft 2 in. jib boom, and outreach with 440 lb platform capacity. Featuring 360° pivoting capability, self-propelled products provide access to reach overhead sites, and can be driven at speeds up to 2.5 mph.

JLG Industries, Inc.    McConnellsburg, PA 17233 9533
Mar 30, 2006 MSP Series self-propelled vertical mast stock pickers are available in 10, 15, and 20 ft platform height, and feature zero degree turning radius and max 33 in. width. Incorporating heavy-duty planetary gear drive motors, products allow lifts to deliver product and material to specified location at speeds up to 3.5 mph. They feature Point and Go® drive and steer system with one-hand operation, 10 MSP side and front bumpers, platform gate operation interlock, and programmable motion alarm.

Valtra, Inc./Good Hand, Inc.    Pico Rivera, CA 90660
Mar 30, 2006 Designed to solve problem of inadequate grounding of weld arc, Ground Hog prevents current restriction by combining large copper contact point with clamping pressure, facilitating transfer of electrical current in full circuit. To further ensure complete arc, Ground Hog controls electrical current by isolating contact surface and transfer to cable connection. Clamping force is 465 lb using Strong Hand® Plier or 1,000 lb using Strong Hand® Sliding Arm Clamp.

Material Transfer & Storage, Inc.    Allegan, MI 49010 0218
Mar 30, 2006 Material Master PowerFill(TM) features horizontal pivoting and rotating bag fill cartridge. Bag support carriage and fill head lower to programmed operator height, extend toward operator, then rotate for reach-free bag strap and bag spout connection. Unit includes touch screen controls for efficient operation.

Leybold Vacuum USA, Inc.    Export, PA 15632-8900
Mar 30, 2006 UNIVEX line of universal experimentation vacuum coating systems is suited for use in research and development and pilot production applications. It is adaptable for use in all vacuum coating processes. With configurations of varying chamber capacities, UNIVEX features high vacuum pump systems, power supplies, PLC, substrate holders, film thickness and vacuum measurement, cooling and heating systems, feedthroughs, view windows, and gas admission.

Cat Lift Trucks    Houston, TX 77081
Mar 30, 2006 Featuring MicroCommand(TM) AC control system, ET3000-ET4000 series includes 3 models with capacities from 3,000-4,000 lb. These 100% ac drive motor powered, 3-wheel lift trucks have operator presence detection system and can handle uneven surfaces and trailer loading in demanding environments. Products allow for separate control of torque and speed, and individual thermal protection systems guard against overheating of pump motor, drive motor, and control panel.

Ridg-U-Rak, Inc.    North East, PA 16428
Mar 30, 2006 Tested up to full 200% of AC156 seismic qualification with little or no merchandise shedding or rack damage, Seismic Storage System reduces effects of violent ground forces created during earthquake. Base isolated pallet rack storage system is positioned between columns of upright frames and anchored to floor, allowing rack's upright frames to travel during seismic event. It will not obstruct or impede daily operations and can be moved during warehouse reconfiguration.

Sealant Equipment & Engineering, Inc.    Plymouth, MI 48170-0965
Mar 29, 2006 Servo-Flo® 404 System combines shot meter and dispense valve for robotic and automated dispensing applications. Quick-change Tip-Seal® dispense valve delivers accurate start-stop of material flow, while closed-loop processor provides precise shot volumes, consistent bead diameters, and variable bead diameters. Positive rod displacement and servo motor design will dispense abrasive and filled adhesives and sealants such as epoxies, silicones, and urethanes.

Hitachi Power Tools    Norcross, GA 30093
Mar 29, 2006 Oil-free EC79 features contractor-grade induction motor, integrated control panel, and ball valve tank drain. Based on Inspire Design, maintenance-free, portable unit has 90 psi pressure rating that enables it to accomplish short burst applications with tools such as finish nailers and staplers. This 2 peak hp/1 Run hp compressor operates on standard household current, drawing 13 A, and features 6 gal tank and factory-installed ¼ in. coupler.

Anver Corp. - Anver.Com    Hudson, MA 01749
Mar 29, 2006 Made from elastomer that can handle up to 400°F, ESD vacuum suction cups have static dissipating value of 97 Kohm/cm at 500 V. Capable of bleeding off static charges through ground, whether on machine or built into system, cups are available in flat, single-, and multi-bellow shapes in sizes from 1/8-2 in. OD. Cups are designed for use where there is an explosionproof requirement as well as in food, electronics, automation, packaging, and printing industries.

Bosch Rexroth Corp., Linear Motion & Assembly Technologies Div.    Buchanan, MI 49107-1801
Mar 29, 2006 Model VE2/MP multipole conveyor stop gate with SmartStop(TM) technology offers functionality of VE2 stopgate, pneumatic solenoid valve, embedded microprocessor, 3 proximity sensors, and array of LED indicators to provide operations control and feedback in self-contained package. It includes two 3-pin connector plugs that provide 6 I/O connections, and 8 LED displays that provide visual indication to operational status of stop gate. Unit bolts into T-slot on extruded aluminum conveyor profile.

Hot Melt Technologies, Inc.    Rochester, MI 48308
Mar 29, 2006 Suited for low- and medium-volume product assembly and packaging applications, Benchmark® 205-LV2 System may be used with 1 or 2 hoses and handguns with bead or spray nozzles. It features 1.25 gal melt tank for 8 lb of hot melt adhesive or sealant and operates from 120 V outlet. Constructed with sealed fractional horsepower drive motor and cast iron pump with steel gears, system is ready to operate 30 min after it is switched on and adhesive is loaded.

Boston Rack    Raynham, MA 02767
Mar 28, 2006 Designed after analysis of records management requirements, Archival Storage Systems incorporate variety of rack and shelving storage alternatives. Units meet customer needs for space utilization, storage density, retrieval efficiency, and short- and long-term storage requirements. Products include racks, shelving, mezzanines, catwalk systems, lifts, conveyors, and turnkey systems for storage of paper, magnetic media, tapes, films, and medical records.

Wire Belt Company Of America    Londonderry, NH 03053-7449
Mar 28, 2006 Flat-Flex® Shuttle Conveyor is designed to gap product and turn its direction of travel through 90°. It is suitable for transferring of product from narrow size belt to wider belt or vice versa, depending on specified stroke of shuttle. Conveyor is offered with Flat-Flex stainless steel belting and variable speed electric motor drive, with other drive options available.