Western International, Inc.    Norwalk, CT 06851
May 17, 2011 Featuring double-wall design to safely store diesel fuel, Transcube XS Series includes 20 ft Model TCS200 with 7,000 gal capacity and 40 ft Model TCS400 with 16,000 gal capacity. All fill ports, pumps, fittings, and connections are centrally located within one control cabinet, which includes spill containment sump that is completely within tank's secondary containment area. To prevent tampering and theft, access to fuel and pumping equipment is secured by lockable doors.

Anver Corp. - Anver.Com    Hudson, MA 01749
May 17, 2011 Equipped with adjustable X-Y beams and narrow rectangular suction pads, low profile Anver VPFL4 Series below-the-hook modular vacuum lifter suits assembly, stamping, and packaging operations. Unit requires only 8 in. of headroom, is powered by compressed air and controlled by control valve with safety lock. Features include air filter, vacuum check valve, vacuum gauge, and audio-visual alarm which activates in vacuum loss or leakage.

Nu-Star, Inc.    Shakopee, MN 55379
May 16, 2011 Operated by one pedestrian, Power Pusher runs on batteries and does not emit any harmful exhaust or fumes. Unit occupies footprint of less than 2 yd² and does not require operator to be licensed in order to efficiently and safely push, pull, and maneuver wheeled loads up to 150,000 lb. Built in battery charger plugs into standard outlet, and available accessories/attachments include hitches, tow bars, strobe, motion beeper, and push plates.

McElroy Manufacturing, Inc.    Tulsa, OK 74158
May 13, 2011 Comprised of pipe racks and powered pipe stands that hold enough lengths of pipe for day's worth of work, MegaMc® PolyHorse(TM) is suited for jobsites using 20-48 in. dia polyethylene pipe. Because pipe is stored in one location and is ready for use, system allows heavy machinery to work other places on site. Single operator can maneuver pipe onto pipe stands and into pipe fusion machine with use of remote control. Max capacity is 70,000 lb, with max pipe length weight of 10,500 lb.

Northfield Precision Instrument Corp.    Island Park, NY 11558
May 13, 2011 Model 627w (.0001 TIR) 6 in. dia., coolant/air blast thru, 2-jaw air chuck, with 1 in dia. counter bore for tap clearance, provides workholding package to grip hole saw blanks for turning and tapping. Sub-jaws have 2 bullet nosed pins that will grip blanks between 2 holes, and ¾ in. wide jaws fit between 2 hardened and ground full circle segments mounted to chuck face to support workpiece during machining. Accuracies range from 0.001-0.00001 in.

Morey Corp., The    Woodridge, IL 60517
May 13, 2011 Rugged TRAX MT-10 Asset Tracker is battery-powered unit that is suited for track and trace applications where no consistent power source is available. Unit employs wireless connectivity via cellular modem and includes GPS receiver to access location data of assets. It is also capable of over-the-air programming and motion detection. Designed to IP-67/66k standards, enclosure withstands shock, vibration, and temperature stresses of heavy duty truck or equipment environment.

Magnet Paints    Amityville, NY 11701
May 13, 2011 Installed at up to 40 dry mils thick, MONSTALINER(TM) goes down in 2 thick coats. Two-component catalyzed coating has 8-hr pot life, which eliminates risk of spoiled material. As product is rolled, texture is pulled up from coating and cures with orange peel bumpiness without using crumb tire rubber. MONSTALINER(TM) is also 100% UV permanent and carries 5 Year Guarantee against fading, chalking, or discoloration due to sunlight. Once installed, coating requires little or no maintenance.

Qubiqa USA, Inc    Trevose, PA 19053
May 11, 2011 Used to unload 20 and 40 ft freight containers, Empticon is operated by one person via wireless control desk. This eliminates heavy, repeated, and strenuous lifts while moving up to 600 crates/hr. It can be used as stand-alone unit, and unloader also offers flexible integration with other equipment, such as robot palletizers or sorters. It requires minimal maintenance and is available for serving more gates through sideways travelling.

ATI Industrial Automation    Apex, NC 27639
May 10, 2011 Featuring direct-mount 100 mm bolt circle to food-handling robots, Model QC-77 enables robots to automatically change end-effectors or other peripheral tooling in extremely stringent food-processing environments. Stainless steel design resists attack by organic and inorganic compounds while withstanding aggressive washdown. Equipped with Fail-Safe Locking Mechanism, tool changer uses integrated Lock and Unlock sensing for safe coupling and uncoupling.

VEROTEC Inc    Londonderry, NH 03053
May 10, 2011 Veroshield 19 in. EMC-screened rack case is offered in 1U high and 10.4 in. deep version as well as 2U and 3U high, 14.4 in. deep models. Typical attenuation figures are in excess of 110 dB up to 10 MHz, falling linearly to 40 dB at 1 GHz. Product features flat panel construction and is manufactured from 0.9 mm zinc-plated steel to maintain electrical conductivity throughout unit. Removable top and bottom covers enable access to internal components.

Jergens, Inc.    Cleveland, OH 44110
May 09, 2011 Mounted to any machine or rotary table, Fixture Pro® 5-Axis Quick Change System permits multi-sided access to pallet-mounted workpieces on 3+2 multiaxis and 5-axis machines. Modular quick change system, allowing unrestricted access to various part faces, offers various riser sizes and styles to raise part off table, while jaws and other vise components provide rigid clamping forces. All components feature center location and timing pins, promoting accurate and repeatable part orientation.

Asymtek    Carlsbad, CA 92008
May 06, 2011 Available in circulating and non-circulating versions with single valve design, Nordson ASYMTEK Select Coat® SC-280 applies conformal coating material to circuit boards in controlled, uniform film rather than atomized spray, minimizing overspray, masking, and rework. System handles viscosities of less than 100 cps and delivers coating thicknesses from 0.5-8 mils for solvent-based materials. Variety of cross-cut nozzles is available to dispense film pattern widths from ~0.25-0.75 in.

Mitsubishi Forklift Trucks    Houston, TX 77043
May 06, 2011 Used to help handle and dispose of contaminated rubble, 15-ton heavy-duty forklift with 9,000 kg capacity features fully-sealed cabin constructed using 100 mm thick steel plates and 230 mm thick lead glass. All sides are welded to enable operator to maneuver forklift with maximum shielding against radiation, and special filters remove dust and other radiation-contaminated material. Also, air-conditioned cabin is pressurized by air purifier to prevent external air from entering.

Anver Corp. - Anver.Com    Hudson, MA 01749
May 05, 2011 Available in electric or air-powered models, VT Series features stainless steel handlebar that secures at 6 points, has custom formed plastic grips, and is fully adjustable to meet comfort requirements. Updated lifting tube is compressible and has screw-on connectors. Providing 100% duty cycle, vacuum pump features vacuum gauge and 360° swivel top for unlimited rotation. Lifter can be equipped with virtually unlimited selection of interchangeable standard and custom pick-up heads.

Stanley Vidmar    Allentown, PA 18105 1151
May 05, 2011 Available in 48 x 25 x 25 in. and 36 x 25 x 25 in. sizes, Model JBX provides heavy-duty on-site tool storage. Box features 5 or 6 in. casters, lashing rings for securing during transport, and gas-spring lid that stays open and offers smooth motion. Designed for indoor or outdoor use, tool box is available in all standard colors as well as outdoor black with weatherproof paint. It is suited for construction sites, military applications, and power generation industry.

IKey Ltd.    Austin, TX 78754
May 05, 2011 Suited for use in harsh environments, Model PMD-W-SK-97-TP features ergonomic 10° pullout that fits into rackmount computer systems and enclosures. Magnetic, auto-lock feature prevents drawer from falling open, while 6.5 in. depth allows for storage behind drawer. Constructed of CRS steel with scratch-resistant epoxy paint finish, 10 lb drawer has operating temperature of -40 to +70°C. Model PMD-W-SK-97-TP pairs with SK-97-TP keyboard, which meets NEMA 4X specifications.

Parker Hannifin Corp.    Oxford, MI 48371
May 05, 2011 To keep refrigerated air dryers operating at full capacity, Finite series removes up to 99.995% of oil, water, and solids from compressed air and other gases. This protects complex internal components of dryer by removing compressor oil carryover. Element threads into top of housing, facilitating replacement even in space-constrained environments. Design also eliminates need to disconnect drain connections before removing bowl to access spent element.

Industrial Conveying (Aust) Pty Ltd    Victoria 3552  Australia
May 04, 2011 Featuring adjustable supports, modular pallet conveyor sections can be assembled in any configuration to meet application needs. Products include 2- and 3-chain conveyors, powered roller conveyors, and transfers suited for use with Australian Standard pallets for weights up to 1,200 kg. Standard sections are assembled in 1.5, 3.0, 4.5, and 6.0 m lengths, and non-standard lengths, widths, and loads are also available. Drive units can be fitted with shaft-mounted external or internal motor.

Sidel, Inc.    NOrcross, GA 30092
May 04, 2011 GW net-weight filler comes in several configurations to meet needs of vegetable oil, dairy product, and sauce packagers. Weight sensors are made entirely of stainless steel, can be used for volumes up to 5 L, and feature IP69K protection. Offset valve promotes flexibility for processing liquid as well as more viscous products, while dosing precision is optimized via level regulation system. Output speeds reach up to 60,000 bottles/hr. Hygienic design complies with 3A, EHEDG, and FDA standards.

Gorbel Inc.    Fishers, NY 14453 0593
May 04, 2011 Made from lightweight extruded aluminum, Aluminum Gantry Crane supports capacities from 250 lb to 2 tons, has adjustable spans up to 20 ft, and adjustable height under boom ranges from 7-12 ft. Product may be collapsed when not in use to conserve floor space and assembles in as little as 10 min. Portability accommodates areas where lifting equipment is needed on infrequent basis, such as over machines for maintenance and pulling product.