FOX IV Technologies, Inc.    Export, PA 15632
Jul 19, 2006 Based on Printronix T5000 thermal tabletop printer, 7000 series is designed for print and apply applications that could evolve into RFID applications. While model 7000 has 4.1 in. print width, model 7600 has 6.6 in. print width. Each machine offers 203 or 300 dpi resolution with direct thermal or thermal transfer operation. Perfect ZPL emulation makes these products suited for environments utilizing Zebra XiIII series tabletop printers.

ITWRansburg Electrostatic Systems    Toledo, OH 43612
Jul 19, 2006 With quick disconnect feature, robot-mounted RMA-303 Direct Rotary Atomizer speeds atomization exchanges. High-wear cartridge valves feature one-piece needle and stem design with replaceable fluid seat. Change-outs are facilitated through color-coded tubing bundle. Regardless of substrate or application, color match or clear coat cup technology, along with dual shape air passages, provides flexibility from large panels to cut-ins.

Meese Orbitron Dunne Co.    Ashtabula, OH 44004
Jul 19, 2006 H Series tilt trucks are designed with dual reinforcing braces set near upper rim and mid-section to strengthen key load bearing areas. Trucks are set on full perimeter, powder coated steel underframes atop four industrial strength casters and nest when empty. Developed for collection and transfer of laundry, linens, waste, recyclables, and other materials, trucks are molded in polyethylene offering structural strength and immunity to rain, snow, sunlight, and cleaning chemicals.

Cyl-Tec, Inc.    Aurora, IL 60506
Jul 19, 2006 High-pressure gas cylinders are made from 4130X Chrome Moly Steel. All size 300, 250, and 220 cylinders are manufactured by Billet Pierce process, while medical D through 150 size cylinders are manufactured by spinning process. Cylinders 80 cf and larger come with plain or embossed neckring and cylinder cap. Acetylene cylinders, aluminum cylinders, valves, caps, and neckrings are available.

Hickory Hardware    Portland, TN 00000
Jul 19, 2006 Morgan Stacking Dolly system allows up to 35 dollies to be interlocked and stacked in 40 in. column with built-in hand grip. Fitted with hard rubber wheel casters, each dolly weighs 14 lb, handles loads up to 800 lb, and features 1 in. plywood construction with carpeted legs. Dollies can be stack wheels-down for moving and wheels-up for trucking.

Creform Corp.    Greer, SC 29652-0830
Jul 18, 2006 Equipped with white nylon swivel casters or black rubber wheel swivel casters, GN-400 dolly features polypropylene platform for moving part loads up to 445 lb around facilities. Design includes molded tabs and corresponding slots that fit together, allowing individual platform modules to be coupled to form cart with larger base. Standard product measures 26 ¾ x 15 ¾ x 4 ½ in. and does not require any tools for assembly/disassembly.

Coe Press Equipment Corp.    Sterling Heights, MI 48310
Jul 18, 2006 Designed for staggered feeding applications of 12-30 in. coil widths, press-mounted Zig-Zag Servo Roll Feeds offer processing velocities to 576 fpm and acceleration rates to 70 fps. Y-axis shuttle travel of 4-12 in. provides processing capabilities required for one-out or multiple-out applications. Along with ServoMaster 3 Dual Axis Controller, products feature 500-job memory, true pivoting upper feed roll, 4-roll catenary section, and funneled stock path.

Rubbermaid Commercial Products LLC    Winchester, VA 22601
Jul 18, 2006 Facilitating collection, sortation, and transportation of waste and recycling, BRUTE® Trainable Dolly features hitch-and-ball design that enables maintenance professionals to connect and transport up to three 55-gal BRUTE® containers at one time. Tilt Stabilizer provides safe method of removing full liners of heavy waste, while Pull Handle Accessory optimizes overall control and leverage when transporting multiple containers. Quiet Casters minimize workplace disruption.

DE-STA-CO Industries    Madison Heights, MI 48071
Jul 18, 2006 DLM DIRECTCONNECT(TM) mini ball rail slides feature infinite stroke adjustability, multiple air port locations, and multi-position sensing, making them suited for use in various automation applications. Precision hard stop and double bearing options are also available. Saving time, weight, and associated costs, mounting patterns allow DLM slides to be mounted directly to other modular automation products without adapter plates.

Brudi Bolzoni Auramo    Homewood, IL 60430
Jul 17, 2006 Using microprocessor-controlled system to adjust clamping force, ETX-G3S Intelligent Carton Clamp reduces product damage during load handling in industries that experience variations in clamping pressure. Parameters are pre-determined by end-user, and electronics are interlinked with hydraulic technology to ensure accurate control. Providing equalized clamping pressure, load configuration data is collected in real time through 3 sensor sets. Load capacities range up to 3,500 lb.

Air Squared, Inc.    Broomfield, CO 80020
Jul 17, 2006 With completely sealed pumping section, semi-hermetic scroll Vacuum Pump/Compressor allows cooling of both scrolls. As compressor, unit develops up to 60 psig with 2 cfm displacement, while vacuum model develops up to 200 mtorr with displacement of 2 cfm. Seals are PTFE composite, and wetted surfaces are constructed of stainless steel, nickel, and hard anodized aluminum. Unit is suited for fuel cells, natural gas boosters, and pumping corrosive, radioactive, or hazardous gases.

Value Engineering Alliance, The    Cambridge, MA 02139-4772
Jul 17, 2006 DSP-powered PIATI(TM)_SBC incorporates 640 x 480 pixel resolution CCD sensor with progressive scan capability. This ECC200 Data Matrix decoder solution is configured via included PC-based program with GUI that facilitates identification and selection of parameters and options. GUI also supports selection and configuration of supplementary automatic identification tools. Along with image/data and program memory, solution also provides digital I/O and RS232 interface.

Flexicon Corporation    Bethlehem, PA 18020 8006
Jul 17, 2006 Split Frame Unloader allows upper frame to be forklifted onto plant floor, loaded with bulk bag, and forklifted back onto subframe within several inches of ceiling. For discharging from bulk bags, product features Power-Cincher® flow control valve, Side-Flexer(TM) bag activators, and flanged discharge chute. Constructed of stainless steel and finished to sanitary standards, unloader is offered with load cells and programmable controls for automated weigh batching.

Baxa Corp.    Englewood, CO 80112
Jul 17, 2006 Designed for medication and feeding applications, 35 mL Exacta-Med Oral Dispenser bridges gap between 20 and 60 mL dispensers. Preventing errors and wrong-route administration of non-IV fluid drugs, dispenser features tip that cannot connect to luer needle hub or needleless IV system.

Steelcote Manufacturing. Co.    St. Louis, MO 63103 2990
Jul 13, 2006 Applied via brush, roller, or trowel, EPO-LINE 164 protects steel and concrete tanks from effects of acids, alkalis, and solvents. It is engineered to be used with or without fiberglass reinforcement and imparts abrasion resistance as well as chemical resistance. Able to be used in tanks storing chemicals kept at temperatures up to 400°F, this 100% solids, odorless epoxy has 20-30 min pot life and dries to hard, dense, high-gloss finish in 6 hr.

Material Transfer & Storage, Inc.    Allegan, MI 49010 0218
Jul 13, 2006 Designed to meet application requirements, Dual Container Dumper accepts and discharges 1 or 2 containers loaded with pallet jack at floor level. Custom hoppers include manually adjustable slide gate for precise control of product discharge and variable-speed control to adjust feed rates. Along with contact surfaces constructed of 304-2b stainless steel, product features inflatable seals and UHMW debris guards to prevent contaminants from entering product flow.

IBAG North America    North Haven, CT 06473
Jul 13, 2006 Set includes 200 x 100 x 32 mm aluminum alloy slot chuck with 100 x 200 mm clamping area. Furnished rubber adapter mat can be configured as required by punching holes through mat to accommodate clamping of small parts. For workpiece adjustment, there are work locating stops on 2 sides of vacuum chuck. Along with vacuum stopper that allows limitation of area affected by vacuum function, kit includes air supply hose with connector and 2 clamps for holding chuck to machine table.

Ingersoll-Rand Co.    Annandale, NJ 08801
Jul 12, 2006 Featuring Safety-Reel(TM) design to minimize retraction speed, Hose Reels are suited for dispensing air, oil, fluid, and grease. Adjustable guide arms enable versatile mounting positions, while rolled edges prevent abrasion. Featuring 3/8 and ½ in. ID, ultra-duty reels come in 25, 35, and 50 ft lengths with max ratings of 300, 2,500, and 4,000 psi. Offered in ¼, 3/8, and ½ in. ID, supreme-duty reels come in 35, 50, 75, and 100 ft lengths with max ratings of 300, 2,500, and 5,000 psi.

Anver Corp. - Anver.Com    Hudson, MA 01749
Jul 11, 2006 Intended for sorting and collating machines as well as printing, packaging, and other paper handling equipment, Paper Suckers are molded from natural rubber to resist ink and dust and are offered in sizes from ¼ in. OD for push-in or flange mounting. Units feature bottom cleats to eliminate puckering or flat bottoms for gripping cartons or thick-coated sheets. Paper Suckers are also available in high-wear polyurethane, various blends, and neoprene.

Techstar Plastics, Inc.    Port Perry L9L 1L8  Canada
Jul 11, 2006 Suited for jobs requiring single person to handle loads up to 400 lb, Starcart(TM) Indoor/Outdoor Model 20 features level carrying capacity of 10 ft³. Rotomolded linear LDPE construction assures corrosion resistance to salt, chemicals, and oil. Since LDPE is non-toxic, cart is safe for foodstuff and ingredients. Measuring 63 x 31.5 x 27 in., cart includes zinc-plated ¾ in. axle and 20 in. semi-pneumatic wheels fitted with ball bearings.