Geerpres, Inc.    Muskegon, MI 49443
Sep 06, 2006 Geerpres Industrial Mopping System features heavy-duty, industrial chassis and two 8-gal galvanized metal buckets with brass drain valves. Welded construction and 6 in. industrial casters enable long-term use with low maintenance, and ergonomic wringer reduces risk of repetitive strain injuries. Optional upper pre-drain screen for preliminary liquid removal and bottom dirt screen for separating solid soil from mop water are available.

Label-Aire Inc.    Fullerton, CA 92833
Sep 06, 2006 Utilizing Wipe-On applicator and selection of available options, Inline Series 6000 Wrap Labeling System makes quick change from round to oblong containers and vice-versa. Wrap belt spins moving containers several times against padded pressure plate after point of application, to ensure accurate and wrinkle-free labels.

IPL Inc.    St. Damien G0R2Y0  Canada
Sep 05, 2006 Polypropylene (PP) industrial pails and commercial containers are suited for holding products such as detergent, joint compound, adhesives, and fertilizers. Also suited for hot filling applications, environmentally sound products are offered in 8 different polypropylene containers in sizes from 2-5 gal. Each incorporates Tamper Evidency tamperproof system, which provides protection from all challenges of distribution and retail environments.

DEK    Rolling Meadows, IL 60006
Sep 05, 2006 Equipment and tooling package enables coating of wafers with die attach materials down to 25 microns thick. It eliminates limitations on chip footprint due to chip fillet formation and resin bleed while allowing uniform deposition of materials with tolerances of ±7 microns using flexible screen printing platform. Solution utilizes Micron-class Galaxy mass imaging system, ultra-flat pallet, die attach stencil or screen, and squeegee.

PIAB Vacuum Products    Hingham, MA 02043
Sep 05, 2006 Combining Models P6010 vacuum pump and BL40-3P polyurethane, dual durometer suction cup, COAX® vacuum solution is suited for packaging applications in food, pharmaceutical, and personal care industries. Vacuum pump equipped with cruise control option automatically maintains pre-set level of vacuum at suction point. With large inner neck diameter and high flow fitting, suction cup provides stability for high initial flow applications and seals uneven surfaces.

Igus, Inc.    East Providence, RI 02914 0349
Sep 04, 2006 LeviChain system integrates iron content into Energy Chain®, which is placed between 2 attracting magnetic rails. Magnets pull on iron in cable carrier, causing it to float within field of attraction. Split crossbar design allows installation or removal of cables without any tools, and magnetic field will not produce any inductive influence on power or bus cables. Virtually silent with 41.7 dB(A) at distance of 1 yd, system can be installed in horizontal, standing, or hanging applications.

ABOX Automation Corp.    Wharton, NJ 07885
Sep 01, 2006 Featuring hand-held touch screen remote controller with Spanish and English directory, PD-2 is used for inserting pouches of desiccant, silica gel, and oxygen absorbers into any size pharmaceutical bottles or various food products. High-speed version, utilizing dual servo motors, is capable of processing up to 350 bottles/min. Along with mobile stand, features include auto-feed function and registration sensor that finds and cuts at sealed area of pouch.

Igus, Inc.    East Providence, RI 02914 0349
Sep 01, 2006 High-temperature, chip-repellent version of Systems E2 and E4 Energy Tubes is constructed with igumid HT polymer material, making it suitable for applications where scalding chips or metal fragments are prevalent. Snap-open hinges are located on inner or outer radius of lid according to preference, enabling repair or replacement of cables housed within. Available options include horizontal or vertical cable separators and integrated strain relief.

Assmann Corp. of America    Garrett, IN 46738 1844
Aug 31, 2006 Available in 175, 200, and 250 gal capacities, Chemical Feed Stations feature overflow basins and are constructed from high-density crosslink or corrosion-resistant, FDA-compliant, linear polyethylene. Volume markers are designed for optimal visibility, and shelf supports most pumps and metering devices. Along with stackable polyethylene stands, options include fiberglass shelves for pump and metering devices totaling 25 lb or more.

Anver Corp. - Anver.Com    Hudson, MA 01749
Aug 31, 2006 Available in compressed air and electric powered models, VT-Series vacuum tube lifter features custom contoured pad attachment to handle odd-shaped loads, such as mufflers and tailpipes. It swivels 360º under vacuum, letting one person handle loads up to several feet long. Lifter features up/down controls built into ergonomic handle, vacuum gauges, and rugged wire-reinforced tube with protective cover.

Micro Plastics, Inc.    Flippin, AR 72634
Aug 30, 2006 EZ Twist lock circuit board supports feature locking base that snaps into chassis by hand to enable loading and unloading of cables and wires with twist of fingers. Additional arm inside twist lock holds smaller wires or bundles. Molded in natural nylon 6/6, parts fit 4.75 mm dia hole and panel thickness of .76-1.98 mm.

Igus, Inc.    East Providence, RI 02914 0349
Aug 30, 2006 Featuring side link and stop dog design, System E4/100 Energy Chain® Cable Carriers are maintenance-free, dirt-repellant, and available in 7 styles and up to 42 widths. Units are suited for long travel applications ranging from 656-1,312 ft and deliver optimal performance at up to 26 ft, unsupported. Equipped with snap-open crossbars for cable installation, carriers are available with wide array of mounting bracket, cable separation, and strain relief options.

Dymax Corp.    Torrington, CT 06790
Aug 29, 2006 Available with 18 or 25 in. wide UV curing lamps, WIDECURE(TM) conveyors can be outfitted with longwave or shortwave bulb. Lamp height can be adjusted to accept parts from 5-12 in. high, and tightly controlled line speeds are adjustable in 0.1 fpm increments from 1-50 fpm; faster conveyors are also available. Integral shielding eliminates stray UV light that might otherwise reach operator. Uses include UV sealing, curing, and bonding applications.

Dorner Mfg. Corp.    Hartland, WI 53029 0020
Aug 29, 2006 Featuring extruded aluminum frame with T-slot construction, 2200 Series is offered in lengths from 2-24 ft, widths from 1.75 in. to 2 ft, and frame heights as low as 1.87 in. V-guided and non-V-guided belt compatible construction also includes sealed ball bearings as well as rack and pinion belt tensioning. All models are end and center drive-compatible. Operating at speeds to 264 fpm, conveyors hold parts moving on inclines/declines and can also be used for upside-down applications.

Intelligent Motion Systems, Inc.    Marlborough, CT 06447-1334
Aug 29, 2006 Featuring integrated motor and electronics for current control and smooth performance, MDrivePlus(TM) has compact profile and screw-driven linear slide that promotes torsional stiffness and stability. Slide includes aluminum guide and wear-compensating, anti-backlash driven carriage with precision rolled stainless steel lead screw. Speeds over 60 ips are attainable with standard linear slide leads of 0.10, 0.20, 0.50, and 1.00 in. travel per revolution.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Aug 29, 2006 Providing even coating build on product, 114-Series premium air assisted airless tips are used for spraying stain, toner, lacquer, and top coats using low, medium, and high viscosity materials. Tips provide consistent fluid flow, streakless coverage, and coating atomization. Used with AA1500, AA4000, and MAG AA automatic spray guns, tips suit cabinet fascia, wood furniture, metal office products, commercial equipment, and aircraft applications.

Asymtek    Carlsbad, CA 92008
Aug 28, 2006 Enabling underfill flow-out in one lane while jetting underfill in opposite lane, Axiom X-1022 Dual-Lane dispensing system optimizes throughput in multi-pass underfill applications. SMEMA compliant, programmable, flat-belt conveyors are independently controlled, allowing different sized parts to be processed in each lane. System is configured with 6 stations of contact or impingement heating to ensure consistent substrate heating at specified ramp rates.

Eriez Magnetics    Erie, PA 16506
Aug 25, 2006 Rare Earth Permanent Sight Glass Magnets remove tramp metal contamination from plastic resin and pellets as it passes through site glass loader on its way to molding machine. Featuring continuously welded construction, magnets are available in 4 sizes to fit most site glass loaders. Users can choose between 1 in. or 5/8 in. dia.

Cortec Corp.    St. Paul, MN 55110
Aug 25, 2006 Suited for highly sensitive electronic components, VpCI(TM)-125 Film and Bags contain blend of Vapor Phase Corrosion Inhibitors and ultra-high ESD chemistries, providing dual-purpose protection. Products protect metal surfaces and contacts of electronic components, as well as actively passivate all enclosed void spaces within package. Self-healing, non-toxic packaging qualifies to MIL-PRF-81705D and is difficult to damage during transit or inspection.

Tente Casters, Inc.    Hebron, KY 41048
Aug 25, 2006 Featuring interchangeable colors and parts, SMILE Casters are suited for children's furniture, swivel chairs, beds, cribs, cradles, toy containers, high chairs, walkers, and wagons. Multi-colored casters are assembled with customer's choice of components, including housing, wheel bodies, treads, and faces. Units have 2 in. dia wheel and are available with or without brakes.