Wanner Engineering, Inc.    Minneapolis, MN 55403
Oct 11, 2006 Available in 4 sizes, Hydra-Cell Pulsation Dampeners protect pipes, valves, fittings, meters, and in-line instrumentation of Hydra-Cell series positive displacement pumps by producing steady, continuous fluid flow up to 99% free of pulsation and vibration. Bodies are chemical-resistant, and pressure ranges are available up to 4,000 psi. By reducing agitation, foaming, splashing, and degradation, products enable uniform application of material in spraying and coating systems.

2L inc.    Hudson, MA 01749
Oct 11, 2006 Pallet-Vise may be used as stand-alone solution for machining or in multiple-pallet configuration for larger parts or high-volume production. Alternatively, Vac-Vise may be used as vacuum chuck or pallet system simultaneously to hold various workpiece shapes and sizes. Both allow machining and marking of workpieces without custom fixtures and are designed to facilitate creation of repeatable procedures. Adjustable hex workstops and edge clamps are available to promote flexibility.

Hernon Mfg., Inc.    Sanford, FL 32771
Oct 11, 2006 Hernon R125 pressure reservoir dispenses any liquid, including adhesives, solvents, lubricants, and sealants. Material output line is located at center of lid, allowing dip tube to be centrally located so that 1 gal container can be directly placed into reservoir. Disposable polyethylene material feed tube is resistant to most chemicals, and airtight lid seal and durable construction of reservoir body ensure no leak points for air or material.

DeWalt Industrial Tool Co.    Hampstead, MD 21074
Oct 11, 2006 Suited for finish carpenters and woodworkers, Model D55140 produces .75 scfm at 90 psi, 135 psi max and operates at 69 dBA. It is equipped with 1 gal tank, 2.6 A motor, and oil-free pump. Weighing 24 lb and measuring 9 in. wide, portable compressor includes one-hand universal quick connect and ball drain valve for thorough tank draining. Roll cage design shields unit from wear and tear, while wrap-around control panel covers frame and provides further protection to key components.

Gough Econ Inc.    Charlotte, NC 28266
Oct 10, 2006 Used in applications requiring lengths in excess of 5 ft and widths over 18 in., twin rotary vibratory feeders/screens are suited for feeding, conveying, screening, and elevating material. Four coil springs, located on frame assembly, minimize vibration transfer and ensure gentle handling of material. Since product weight is typically in suspension, self-propulsion energy promotes optimal efficiency. Material is processed at speeds from 50-3,500 ft³/hr.

Kurt Manufacturing    Minneapolis, MN 55421
Oct 10, 2006 Intended for smaller machining projects, HDLM4 features 2 clamping stations, provides repeatable clamping to 0.001 in., and delivers up to 6,316 lb of clamping force at 70 lb of torque. It has adjustable pre-load design with rigid 80,000 psi ductile iron body and precision-machined steel components. For flexibility, it is available with quick change machinable aluminum, cast iron, and hard jaws. Holding block allows clamping same- or dissimilar-sized parts.

Caliper Life Sciences, Inc.    Hopkinton, MA 01748
Oct 10, 2006 Powered by Maestro software, Zephyr is designed to eliminate labor-intensive manual processes. Automated, entry-level, bench top liquid handling workstation provides researchers with scaleable system that fits into space-constrained laboratories. Along with preconfigured preclinical, bioanalytical, and genomic applications, system comes with operator interface that guides researchers through set-up process and initial use.

Molecular Devices Corp.    Sunnyvale, CA 94089-1136
Oct 10, 2006 Based on SpectraMax® M5 multi-detection system, FlexStation® 3 uses 8- or 16-channel pipettor head to transfer reagents from 96 or 384 distinct wells of source plate to read plate, simultaneously. It addresses wide variety of assays that require liquid handling, including fast kinetic assays such as calcium mobilization or dual luciferase reporter gene, as well as traditional endpoint or slow kinetic assays requiring automation liquid transfer prior to plate reading.

Lista International Corp.    Holliston, MA 01746
Oct 10, 2006 Tool crib cabinets, available in 8 pre-assembled configurations, are suited for storing various tools for machining centers and metalworking shops. Measuring 39 3/8 in. high, TCC 900 cabinets offer high-density storage and counter-height work surface. At 57 1/8 in. high, TCC 1350 cabinets stand at eye level and have same footprint as above model. Each has fully extending drawers with 440 lb load capacity that can be inserted in any combination or sequence in cabinet housing.

Lista International Corp.    Holliston, MA 01746
Oct 10, 2006 Available in 2 depths as well as various heights and widths, Storage Wall® System provides safe, secure, and completely organized storage with modular drawer, shelf, and roll-out tray design. Fully extending drawers and roll-out trays hold up to 440 lb each and offer complete access to stored items. System can also be designed to include order/issue counter and 12 in. deep, recessed bookcase. Design allows for movement of tooling from storage to machines and back.

Sealed Air Corp.    Saddle Brook, NJ 07663-5291
Oct 09, 2006 Suited for mid-volume users, Simple Drop System automatically delivers inflated cushions from any standard Fill-Air® packaging system to overhead bins where they can be accessed by multiple operators. It monitors bins and replenishes them when supply of cushions runs low. System can be customized to accommodate multiple packaging stations or on-line operations to supply one or more operators with cushions.

Fluid Metrics, LLC    Dunwoody, GA 30338-6202
Oct 06, 2006 Compressor Oil Purifier (COP) is designed to remove corrosive acids and catalytic solids that accelerate oil degradation, wear, corrosion, and fouling in rotary screw compressors. Dual core design of COP cartridges incorporates outer core to remove solids down to 3 microns absolute, followed by inner core of ion exchange media to adsorb and neutralize acids. COP installs in auxiliary loop to compressor's main oil circuit.

Merritt, J. R., Controls, Inc.    Stratford, CT 06615
Oct 06, 2006 Type FG-4 Universal Fighter Grip handle incorporates push-button switches, toggles, rocker switches, and thumbwheels, allowing for increased functionality in one controller. Options include twist function for proportional control of potentiometer or hall sensor, and external hand rest for left or right hand orientation. By matching different size handle halves, multi-function handle can accommodate various devices in different configurations.

PSI Peripheral Solutions Inc.    Mississauga, ON L5L 5Z4  Canada
Oct 06, 2006 Accommodating different sizes and thicknesses of materials, Large Capacity In-Feeder 3000 allows large range of items to be fed into boxes or totes along existing conveyor lines. Dual separation technology helps keep belt wear to minimum, enabling months of operation without changing belt. Able to handle up to 4,000 sheets of paper and feed 60 products/min, feeder handles everything from small reply cards to DVDs to full product catalogs.

Scotchman Industries, Inc.    Philip, SD 57567
Oct 05, 2006 Enabling accurate setting of material length, CPO 350 Scotchman® Advanced Measuring System allows feeding of material in 4-24 ft lengths from left to right or right to left. Loc Stop and Multi-Loc systems are manufactured using stainless steel investment casting, and do not slip.

EFD Inc.    East Providence, RI 02914-1342
Oct 05, 2006 Ultra® PP dispense tips, featuring flexible polypropylene shafts, are suited for working with scratch-prone substrates. Used with air-powered benchtop dispensers or automated dispense valves, products ensure trouble-free application of adhesives, lubricants, and other assembly fluids. Available in ½ or 1½ in. lengths, tip come with IDs from .054-.010 in. Color-coded hubs feature SafetyLok(TM) threads for secure attachment to syringe barrels or dispense valves.

Puritan Magnetics, Inc.    Oxford, MI 48371
Oct 05, 2006 Belt Free Magnetic Conveyors convey stamping scrap, knockouts, or chips and turnings from metal working machinery. Design eliminates possibility of belt jamming, tearing, and premature wear. Products incorporate internal magnetic assemblies, attached to heavy-duty roller chain, that travel around inside of conveyor body to attract parts or scrap to conveyor surface. Ferrous objects are conveyed externally along stainless steel slider bed until discharged.

Jergens, Inc.    Cleveland, OH 44110
Oct 05, 2006 Providing up to 4,700 lb clamping capacity, hydraulic production vises come in 3 base styles. Ball Lock(TM) Mounting System features interlocking jigsaw pattern that permits multiple vises to closely nest together; universal base style mounts directly to machine tables; and narrow base style is designed for stand-alone fixture plate mounting. Vises include machinable, reversible jaws; hardened and ground steel rails; flow-through base; and fully sealed lead screw assembly.

Bunting Magnetics Company    Newton, KS 67114 0468
Oct 05, 2006 Heavy-Duty MagSlide® Conveyors utilize high-energy Ceramic magnets or Rare Earth magnets, hidden beneath stainless steel slider bed, to move ferrous materials along surface. Used to hold and move conveyor magnets, twin-roller drive chains travel in oil-impregnated Bunting SlideTrack(TM) channels made from UHMW polyethylene. Channels provide constant lubrication to minimize friction, chain wear, and noise. Horizontal, inclined, and angled units are available with fixed and mobile bases.

Eriez Magnetics    Erie, PA 16506
Oct 05, 2006 Constructed with Erium(TM) 3000 rare earth magnet material, SafeHold® XPL Magnets feature 2-pole design that enables users to lift flat materials up to 2,400 lb and round materials up to 1,600 lb. Units can lift and transfer steel and iron without slings, hooks, or cables. With internal on/off changeover mechanism, there is no scratching of work surface when loading/unloading. Since no electricity is required, potential of power failure interrupting operation is eliminated.