Aehr Test Systems    Fremont, CA 94539
Oct 17, 2006 Designed to help manufacturers increase throughput, FOX-1 full wafer contact test and burn-in system can test entire wafer of devices with single touchdown or be utilized for short-duration burn-in and test. Solution combines full wafer contact, massively parallel test, and Design For Test (DFT) technologies.

Magstar Technologies    Hopkins, MN 55343
Oct 16, 2006 Operating only when product transfer is underway, Quickdraw® Q² (Q-squared) Series Conveyor offers SMEMA 1.2 communication-based transfer of pallets and product between work-cells. It is suited for cleanroom laboratory and factory automation and has built-in plug and play control system that eliminates need for supervisory PLCs and complex pneumatic distribution. Product can also drive auxiliary devices such as elevators, corner rotates, shuttles, and diverters.

Hoffman    Anoka, MN 55303 1778
Oct 16, 2006 Constructed of heavy gauge steel, Net Series communication and server cabinets are designed to house 19 or 23 in. LAN, WAN, phone and voice mail rack equipment, and servers. With open base for easy cable entry, RoHS compliant units feature perforated front doors that can be removed for installation and handles equipped with secure lock. Communication cabinets come with louvered rear door, while server cabinets have split rear perforated door facilitating air movement.

PARKER / PAGE International Hose    Fort Worth, TX 76106
Oct 16, 2006 Offered in sizes from ½-4 in., FTHB (Butyl) and FTHN (Nitrile) hoses offer sanitary solutions for pharmaceutical, cosmetic, food, and beverage industries. Both hoses meet FDA, 3A, and USDA product standards and feature white, seamless tube that resists bacteria accumulation. Designed to use several types of crimp fittings, hoses also feature synthetic reinforcement that withstands internal pressures, helical wire for full vacuum capabilities, and weather- and abrasion-resistant cover.

Lee Controls, Inc.    Piscataway, NJ 08854
Oct 13, 2006 Pre-engineered to carry heavy loads under severe, continuous-duty operations, Precision Slide Table Systems are available with Roller Bearing Pillow Blocks or Precision Plus Linear Ball Bearings. Free rolling, self-aligning pillow blocks ride on case hardened and ground 60 Plus® linear shafting. They feature aluminum pillow block body with black oxide finish on exposed surfaces to resist corrosion. Slides are available with supported and unsupported shafting and are completely pre-aligned.

Ross Controls    Troy, MI 48083
Oct 13, 2006 SELECT 4400 series provide pre-blow air pressure, controlled flow of pre-blow air, select capability between low-pressure pre-blow air, and high-pressure final-blow air. Featuring maximum operating pressure of 600 psig, valves are available for common functions such as 3/2 normally closed (Primary valves), Pressure Selectors, 2/2 normally closed, and 2/2 normally open. Units are available in port sizes of ¾ and 1 in.

Ross Controls    Troy, MI 48083
Oct 13, 2006 HOSE-FUZE(TM) senses high flow in line that occurs when hose or tubing suddenly fails and automatically reduces flow to minimize hose whip. Unit is available in port sizes from ¼-1 in. with either NPT or BSP threads. Maximum operating pressure is 260 psig and temperature range is -4 to 275°F. HOZE-FUZE(TM) should be installed upstream of flexible hose or plastic tubing.

Ross Controls    Troy, MI 48083
Oct 13, 2006 Designed to meet or exceed ISO standards, MD4(TM) Series FRL's feature modular clamps with integral mounting brackets. Units have tamper-resistant, removable knobs for sight-feed lubricators and removable regulator adjustment key. General-purpose plastic bowl with metal shatterguard offers coalescing and adsorbing filter options. Cap color options besides standard gold include red, blue, yellow, and gray. Extra ports and L-O-X® valve options are included.

RNR Plastics, Inc.    Raynham, MA 02767
Oct 12, 2006 Fabricated to requirements, RNR Self-Adhesive Vinyl Pockets are made from clear or colored PVC in sizes from ½ x 1 in. to 24 x 36 in. They are available in various thicknesses with permanent, repositionable, and specialty adhesives. Supplied individually cut or on sheets, pockets can include die-cut thumb notches, windows, punched holes, and printing. All products feature 6-gauge PVC back with 90 lb release liner.

Unidex    Warsaw, NY 14569
Oct 12, 2006 Suspended from bridge-crane style system, Rigid Column Manipulator offers vertical adjustment along linear rail system with XYZ axis positioning. System has reach up to 96 in. and standard load capacities up to 750 lb, and allows placement and retrieval of parts in ovens, washers, machining centers, and storage racks. Vertical movement is electrically- or pneumatically-powered, with controls placed on column-mounted handles or push button pendant.

Dorner Mfg. Corp.    Hartland, WI 53029 0020
Oct 12, 2006 Targeting food, pharmaceutical, and personal care industries, Series 7600 allow for additional clearance around end of conveyor, making end accessible and creating room for other machinery. Providing tightest transfers, ½ in. nose bar is suited for daily wipe down cleanings. One inch nose bar performs in low-pressure wash downs and handles small product transfers. With largest diameter, 1 7/8 in. unit withstands 1,500 psi wash downs and is suited for meat and poultry applications.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 12, 2006 Comprised of 6 light-duty vibration isolators, A10Z4 Finger-Flex Series cushions shock and isolates low-frequency vibration. Base-mounted units feature natural rubber bushing and ring permanently mounted within zinc-plated steel housing. Offered in 30 and 60 hardness durometers, products exhibit natural frequencies from 6-30 Hz. Load is supported by top surface of 2 3/8 in. square mount, which has 17/64 in. clearance hole to accommodate screw fastener from load member.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 12, 2006 Providing protection for loads ranging from 4-350 lb, A10R 4- Finger-Flex Series exhibits various natural frequencies depending on size and durometer hardness of isolator, which ranges from 30-60. Sizes include 13/16, 1 11/64, 1 3/8, 1 29/32 and 3 in. diameters with ¼, 3/8, 3/8, 9/16, and 5/8 in. bores, respectively. Units provide noise suppression in typewriters, printers, copiers, and other precision office or lab equipment.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 12, 2006 Stocked in 4 cable lengths ranging from 42-84 in., base-mounted A 3Z53-ML45 Series consists of Celcon base and drum, type 301 SS Spir'ator® prestressed spiral spring, plus .025 in. diameter Nylon-coated, stainless steel cable. Cable extension/retraction force for largest unit ranges from 2.6 lb extending to 1.3 lb retracting at length of 35 in. Reels are designed for counterbalancing, retrieving, retracting, and product security applications.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 12, 2006 Constant-force, arbor-mounted A 3Z53-ML and 3Z54-PML Series feature Nylon-coated, galvanized steel cable, which is 3/32 in. dia and available in lengths from 60-123 in. Reels are designed for any application requiring smooth and steady force for retracting or returning, such as door and drawer closers, clamps, counterbalances, cabinet and furniture components. They can also be used as magazine feed drives in vending machines and assembly line machinery.

Toyota Motor Mfg. North America    Erlanger, KY 41018
Oct 12, 2006 Available in Regular and Double Cab models, 2007 Tundra Full-Size Pickup Truck comes with choice of 3 engines, including 5 liter V8 with max towing capacity of over 10,000 lb. Bed measures 8 ft, 1 in. and is equipped with 6 standard size stake pockets and 4 corner tie-down hooks. Cab functions as mobile office with center console capable of holding laptop or hanging file folders. Oversized door handles and controls enable workers to enter/exit truck while wearing work gloves.

RIDGID    Elyria, OH 44035
Oct 11, 2006 Conforming to ASTM F 1807 black copper crimp ring specifications, RIDGID® Compact Series Pressing Jaws are available for crimping PEX and multi-layer tubing for radiant heat and potable water applications. Jaw ID clips, constructed of glass-filled nylon and marked with system and size information, facilitate identification of correct pressing jaw. Available in 6 sizes from 3/8-1¼ in., products are designed for use with RIDGID Compact 100-B battery press tool.

Lyon Workspace Products    Aurora, IL 60507
Oct 11, 2006 Designed to facilitate response to spills or injuries that occur on shop floor, Safety Center Cabinet keeps critical safety supplies nearby and ready. Cabinet features 14-gauge, all-welded construction with bright, safety yellow finish. While forklift base facilitates movement anywhere in facility, Lexan® door inserts permit supervision to accelerate evaluation of safety supply inventory without opening doors. Padlock attachment prevents pilferage.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 11, 2006 Molded from Nylatron GS, Model A 6M 7-MT is non-conductive, self-lubricating, and available with .1475 in. or 3.7465 mm pitch. Unit link design eliminates need for master link or special tools for assembly. Each link snaps into next one to form any desired length. Measuring .191 in. wide and .108 in. high, non-corrosive, solvent-resistant drive is suited for stylus or pen assemblies in recorders and X-Y plotters, as well as chart roll drives and counter drives.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 11, 2006 Featuring ½ in. corner radius, Series A 9A45 and A9B45 are 5/8 in. wide with lengths from 3-9 in. and heights from 1 9/32 to 1¾ in. Aluminum handles are black anodized and mounted with No. 10-24 threaded fastener, while brass handles are nickel-plated and mounted with No. 10-32 threaded fastener.