GOAD COMPANY    Ellisville, MO 63021
Jun 29, 2011 Constructed using N-FUZE® Lining Technology, GOAD Tank Linings feature molded corner inserts and infused machine welds that eliminate gaps from hand welds. Products utilize Koroseal® flexible PVC sheets, RF-welded panels, and TANKeye® leak detection system, which locates leaks electronically without draining tank. Linings can be used on virtually any type of containment, tank, or pit with coatings such as Belzona®, Ceilcote®, Epoxies, Fiberglass, Flakeline®, Heresite®, Plasite®, and rubber.

Fowler Products Co.    Athens, GA 30601
Jun 29, 2011 Intended for high-speed bottling lines with throughput of 600 or more bottles/min, sanitary closed transition tote dumper improves cleanliness when handling caps in bulk totes. Basic functionality involves tilting and pouring of large, heavy totes of caps into cap feeding systems, but funnel and close-coupled mating mechanisms prevent dust and debris present on outside of corrugated tote and its pallet from also being dumped into cap feeder.

PVRacking LLC    Churchville, PA 18966-1117
Jun 29, 2011 Constructed using aluminum, galvanized steel, and stainless steel hardware, PV Racking System allows solar modules to slide in place, making solar installation virtually clamp-free for both ground and roof systems. Modules are secured by continuous edge with capping that creates clean and finished look.

ILSCO    Cincinnati, OH 45227 1426
Jun 28, 2011 Featuring silicon bronze hardware, Type GPL3 series fits IPS pipe sizes from ½-12 in. and accepts ground conductor sizes from 4-4/0. UL-Listed and CSA-Certified products, resistant to corrosion, rotate 90° for installation flexibility. Suitable for direct bury in earth or concrete, series supports use within industrial construction, maintenance, power plants, sub-stations, and anywhere perimeter fencing is required to be grounded.

Allpax Products, Inc.    Covington, LA 70433
Jun 28, 2011 Capable of providing in excess of 10 sweeps/min and basket changeover in less than 20 sec, 400X Hyper-Loader supports 3,000/min throughput of 212 X 107 sized cans. Servo carriage control lend to positioning precision and speed, while container pattern pre-stage area allows for continuous sweeping. Additional features include slip sheet squaring area, VFD control on all conveyor motors, hydraulic product elevator, and proportional hydraulic valve control.

Hamilton Caster & Mfg. Co., The    Hamilton, OH 45011 4087
Jun 28, 2011 Available in 6 wheel sizes from 10-21 in. dia with load capacities from 1,000-4,200 lb per caster, 7500 Series has forged steel design and heavy-duty, semi-pneumatic tires that deliver smooth ride even over rough or broken concrete. Tires are engineered with 3 tread sections: base compound for rim adhesion; middle section to dampen shock; and low-rolling resistance tread to reduce energy consumption. Dual-wheel version, also available, doubles total load capacity.

Millstone Medical Outsourcing    Fall River, MA 02720
Jun 28, 2011 With online, password-protected Inventory Management System, medical device manufacturers can track inventory, place orders, and manage distribution. System is built upon DotNet 4.0 platform, which enables download of large data files to Excel and/or Adobe PDF in seconds. Equipped to scale as customers grow, system provides variety of email notifications, flexibility to request complete or incomplete loaner kits, and ability to track expiration dates.

Nippon Pulse America, Inc.    Radford, VA 24141
Jun 27, 2011 Integrating slide guide, encoder, and coreless direct drive linear shaft motor, single-axis Model SCR100 provides 100 lb load capacity, 50-300 mm stroke, and bi-directional repeatability of ±1 count. Moving magnet design locates all cables and connectors in stationary base, eliminating motion errors due to cable forces. Precision ground cross roller way provides stiffness and smooth motion, while non-contact optical linear encoder offers resolutions from 1 micron to 10 nm with digital output.

EV Group Inc.    Tempe, AZ 85284
Jun 27, 2011 Available as option on EVG850TB and EVG850DB automated temporary bonding and debonding systems, In-Line Metrology Module can detect variety of thin-wafer process irregularities and defects, including total thickness variation of carrier wafer, adhesive layer, bonded stack, and thinned wafer; bow/warp of bonded stack; and voids in bond interface. Adding in-line metrology to thin wafer processing enables ramp-up of 3D-IC and TSV manufacturing from pilot-line to volume production.

Continental Disc Corporation    Liberty, MO 64068
Jun 24, 2011 HPX(TM)-PT holder allows HPX rupture disc to be correctly fitted in workshop using precise and recommended torque levels prior to installation of complete assembly between flanges in process system relief stream. Featuring steel socket head cap screws that ensure accurate loading and sealing of HPX rupture disc, product also maintains precise loading of rupture disc where poor flange alignment and gasket cold flow may be of concern.

J. W. Winco, Inc.    New Berlin, WI 53151
Jun 22, 2011 Series GN 473 Aluminum Two-Way Base Connector Clamps are RoHS compliant and available with ground matte or black anodized finish. In standard version, clamping force onto tube is achieved via socket cap screws. Cap screws are DIN 912, stainless steel, European Standard No. 1.4301 (American Standard Series 304), and kits are available that replace cap screws with adjustable levers. Those include lever, spacer bushing, and hex nut.

My Ladder Hand, LLC    Owensboro, KY 42303
Jun 22, 2011 Installed by hooking onto ladder rungs, My Ladder Hand provides 11 x 14 in. shelf on which to hold tools, materials, and supplies. Safety is increased by permitting OSHA-recommended 3-point-of-contact climbing and eliminating need to hold and balance working tools. Shelf also helps prevent dropped tools and eliminates need for multiple trips up/down ladder to retrieve tools. Ladder compatibility includes commercial extension ladders, multi-purpose ladders, small step ladders, and more.

DJ Products, Inc.    Little Falls, MN 56345
Jun 22, 2011 Capable of handling up to 50,000 lb, TrailerCaddyHeavyDuty Chain Drive Extreme eliminates need for diesel semi-tractor or yard truck to move 48 and 53 ft empty OTR and lowboy/drop deck trailers in and out of docks and yards both indoors and outdoors. Dolly features 36 V motor as well as hydraulic actuator powered lift kit that lifts tongue weights from 5,000-15,000 lb. Kingpin, ball hitch, and pintle attachment options are available.

Wittenstein, Inc. (formerly Alpha Gear Drives, Inc.)    Bartlett, IL 60103
Jun 22, 2011 Part of High Performance Linear System, Performance Class Racks partner with gearbox/actuator and pinion for optimal efficiency. Performance version features standard hole pattern, while High Performance model has hole pattern optimized for high feeding forces. Providing strength at tooth root of racks, hardening process enables racks to resist high stresses.

Reed Manufacturing Co.    Erie, PA 16512
Jun 21, 2011 Supporting nominal diameters of 3-6 in. and 3-8 in., respectively, Models PES6 and PES8 compress polyethylene plastic tube/pipe to stop flow of water or gas. When used properly, pipe will return to its original shape and normal flow rates. Manual version develops clamping force by operator physically turning handle on long screw, while hydraulic version uses pump and cylinder for clamping. Positive stops prevent damage to tube from over clamping.

Creform Corp.    Greer, SC 29652-0830
Jun 20, 2011 Custom built using 28 mm pipe and metal joints, Creform Cart enables one person to move heavy grinding wheels without aid of powered vehicle. Storage sections are adjustable to accommodate varying wheel widths, and angle of retaining supports allows wheels to be lifted in or out by hand or with lift assist device. Additional features include 4 in. urethane casters, 2 fixed and 2 with locking brakes, and abrasive-resistant UHMW polyethylene tubing on bottom support pipes.

Bud Industries, Inc.    Willoughby, OH 44094
Jun 20, 2011 Available with 4 casters, portable BudRack Professional Series features ventilated tempered glass front door, solid steel locking rear door, and removable locking sides for security and quick access. It handles 19 in. rack-mount component equipment such as computer servers, monitors, KVMs, networking, and test instruments. Rack has 2 pairs of fully-adjustable 14 ga panel mounting rails, and comes complete with either two 23 in. or four 31 in. depth fans to expel air from cabinet.

Teal Electronics Corporation    San Diego, CA 92121
Jun 17, 2011 TEALsolar(TM) Configurable Combiner Box features DC Disconnect and transient voltage surge suppression device. Fuses are available up to 30 A/string in 8- and 12-string box, 25 A in 16-string unit, 20 A in 20-string type, 15 A in 28-string model, and 10 A/string in 36-string version. Offering maximized internal working space for installation and wiring in field, UL-1741 listed product is available with NEMA 3R, 4, or 4X enclosures in painted steel, fiberglass, or stainless steel.

Western Digital Corp.    Lake Forest, CA 92630
Jun 17, 2011 Featuring polycarbonate exterior and shock-absorbing elastomer cushion inside, WD Nomad(TM) Case protects My Passport® portable hard drives from drops as high as 7 ft. Heavy-duty latch and silicon liner seal out dirt, dust, and moisture, while molded exterior ring allows user to attach carabiner, cable, or nylon strap. With opening for USB connector, user can access drive while it remains in case.

Schunk    Morrisville, NC 27560
Jun 16, 2011 With run-out accuracy of less than 3 microns and balance grade of G2.5 at 25,000 rpm, TRIBOS-Mini polygon form in clamping bore to directly clamp tool shanks as small as 0.3 mm consistently along entire axis. Design delivers direct clamping through elasticity of tool holder material and eliminates collets, collet nuts, and inconsistent tool clamping. Holder is inserted into TRIBOS press, and cutting tool is released in less than 30 sec.