J. W. Winco, Inc.    New Berlin, WI 53151
Nov 06, 2007 Nylon Plastic Adjustable Levers feature glass fiber-reinforced thermoplastic lever handle, with molded-in metal inlay on tapped or blind bore type and same thermoplastic with metal insert on threaded stud type. Insert, screw, and spring on steel version levers are made of steel with black oxide finish. Stainless steel versions are also offered. Pulling lever upward disengages internal serrations, allowing it to be swiveled to optimal clamping position.

Anver Corp. - Anver.Com    Hudson, MA 01749
Nov 06, 2007 Designed for handling large vessels in plant with cranes or outdoors using fork lift and boom, BA1-RV Custom Vacuum Lifter features 3 articulated rubber suction pads that adapt to different diameters from 85-110 in. and lift up to 4,500 lb. Battery-powered solution eliminates need to weld on lifting eyes and incorporates 2.2 cfm piston pump driven by 1/3 hp motor. Features include vacuum station with front-mounted controls, ergonomic handlebar, and remote pendant control.

Sonolite Plastics Corp.    Gloucester, MA 01930
Nov 06, 2007 Suited to fit any medical/surgical device, Medical Specialty Trays include symbols and engraved lettering/part numbers, undercuts and locating detents for nesting and stacking, compatible inserts, and various types of snap-lids. Thermoformed from standard and ecofriendly materials such as styrene, polyethylene, polycarbonate, ABS, ABS anti-stat, PET, and PETG, they can be made in 1 in. sq. up to 48 x 72 in. sizes in gauges from 0.010-0.375 in.

KUKA Robotics Corp.    Clinton Township, MI 48036
Nov 06, 2007 Utilizing 4-axis KUKA KR 40 PA robot with 40 kg capacity and up to 2,091 mm reach, robotic layer forming palletizing solution mechanically turns packages to form interlocking pallet patterns necessary to create stable pallet without reduction in palletizing speed. Solution positively orients and positions each case or package to form layer, resulting in repeatable and flexible palletizing solution that does not sacrifice product or case integrity.

Wildeck, Inc.    Waukesha, WI 53187
Nov 06, 2007 Suited for multi-level applications, custom mechanical VRCs are offered with automatic VRC overload/jam sensing technology that determines overload setpoint each time VRC motor starts. With graphical display interface, AutoSenz(TM) system continuously monitors and protects VRCs from jams or material overload conditions. Integral digital controller communicates wide range of functional data, VRC status, and complete VRC event history.

Aehr Test Systems    Fremont, CA 94539
Nov 05, 2007 Contacting every die on each wafer simultaneously, FOX-15 provides parallel testing and burning-in of up to 15 wafers at a time. System includes general-purpose memory and logic pattern generator as well as individual die power channels to isolate shorted die. Providing up to 1,000 W power dissipation per wafer, FOX-15 features liquid temperature control that maintains chuck temperature ±3°C.

Numerex Corp.    Atlanta, GA 30339
Nov 05, 2007 Measuring 7.25 x 3.25 x 1 in. and weighing 13 oz, OrbitOne SX1 delivers uninterrupted service for up to 7 yr on field-replaceable battery. It is certified and manufactured to exceed IP68, NEMA 6P, and MILSTD 810 environmental specifications. Open data architecture is compatible with virtually any legacy supply chain, logistics, or tracking application, making it suitable choice for security, management, and tracking of military, government, or commercial assets.

GizMac Accessories LLC    Torrance, CA 90503
Nov 05, 2007 Including 12 and 25U models, XRackPro2 features air filtration system that provides clean air into enclosure, computer, and other electronic equipment located inside. Custom air filters are reinforced with metal grid to prevent collapsing due to high airflow volume created by fans. Server rack suits post-production facilities for film, video, and audio editing, television, cable, and radio broadcasting stations, or business and medical offices.

Physik Instrumente (PI)    Auburn, MA 01501
Nov 02, 2007 With 15 mm profile height, Models M-663, M-664, and M-682 ultrasonic piezomotor-driven stages have high acceleration to 20 g for start/stop and high-speed scanning. They feature 16 ips for time sensitive applications, no heat generation/power consumption in steady state, direct metrology linear encoder with 0.1 µm resolution, and crossed roller bearings for guiding accuracy. Available in vacuum compatible and nonmagnetic versions, units offer self-locking when powered down.

Stanley Vidmar    Allentown, PA 18105 1151
Nov 02, 2007 Ball bearing drawer slides for automotive storage cabinets feature linear motion suitable for storing parts and equipment found in automotive service centers. Each drawer slide offers smooth-rolling action that limits lateral motion. Customized to fit all existing cabinet heights, drawer slides are available in four widths and two depths. Options include drawer slide removal and relocation offering flexibility and security.

Sky-Trax, Inc.    New Castle, DE 19720
Nov 02, 2007 Model PD-1C Pallet Detector(TM) utilizes optoelectronic devices for sensing of LOAD and NO LOAD conditions on-board forklift trucks. With low power consumption and heavy-duty SS construction, it offers adjustable sensitivity and ON/OFF trigger points for repeatable placement of loads on forklifts. System assures drivers correct pallet placement on forks where pallet and fork visibility is restricted.

Hytrol Conveyor Co., Inc.    Jonesboro, AR 72401
Nov 01, 2007 Suitable for operations with frequent layout changes or for manufacturers that need to quickly change process lines, Model E24 resolves issues such as heat dissipation, limited motor life span, lack of sufficient torque, and inability to use 1 3/8 in. rollers. Maintenance is minimal and drive motors run only when needed. Conveyor is also available with EZ-Logic technology, featuring dynamic zone accumulation.

Green Valley Inc.    Mount Zion, IL 62549
Nov 01, 2007 Designed specifically for smaller manufacturers with tools weighing 2,000 lb or less, Titan Mold/Die Carts are dc powered with hydraulic mast lift, caster mobility, gravity roller deck, and die safety stop bar. Options include power transport, roller brake, powered tool push/pull, press and rack interlock, strobe light, key switch, and horn.

IAM-Systems    Minneapolis, MN 55413
Nov 01, 2007 Designed to track businesses' assets, tools, and inventory, IAM-Systems let employees retrieve items 24/7 and store them in secure location when not in use. Tool/asset use is monitored by computer, and system can run reports that display item usage as well as other pertinent information. While employees can use reports to keep track of who is using tools/assets and when they are being used, administrators can restrict access of items to authorized users only.

Zaber Technologies Inc.    Richmond, BC V7E2J1
Oct 31, 2007 Offering 0.16 µm resolution at speeds up to 6 mm/s, T-LLS Series can be daisy chained with other products such as stepper motor controllers. All products in daisy chain can be controlled manually via control knob, as well as from single USB or RS232 serial port on any computer. Computer is not required for manual operation, however, if connected to computer, motor position can be tracked and displayed during manual move.

Dorner Mfg. Corp.    Hartland, WI 53029 0020
Oct 31, 2007 Offered in straights from 8-60 in. wide, curves 8-36 in. wide, and cleats 8-24 in. wide, 5200 Series QWIK Conveyor lets end users modify length and add or remove curves. Unlimited attachment possibilities are enabled via light-duty self-tapping screw slot, and designed-in accessory feature promotes integration of controls and accessories. Able to be shortened/extended by one person in as little as 10 min, conveyor supports load capacities to 1,000 lb (straights) and 500 lb (curves).

Bluff Manufacturing, Inc.    Fort Worth, TX 76140
Oct 31, 2007 Available in capacities from 20,000-25,000 lb, Edge of Dock Leveler (EP) automatically returns to stored position when truck leaves, and features self-storing handle and bumper and bumper blocks. Optimum dock height for conventional trailers is 51 in., and proper dock height for refrigerated equipment is 55 in. Widths of 72 and 78 in. are available, while refrigerated lip is optional. With Lo-Dock Leveler (LD), users can raise height of their present dock as much as 11 in.

Crown Equipment Corp.    New Bremen, OH 45869
Oct 31, 2007 GPC 3000 Series starts with entry-level model with load capacity of 2,000 kg and extends to full-featured model with load capacity of 2,700 kg. Series also offers various fork lengths and battery compartment sizes. If picking locations are close by, Pick Position Control(TM) system lets operator move truck to next location without getting onboard. To speed picking process, truck can be guided with X10® control, which is operated from side of truck via thumb switch.

Dueco, Inc.    Waukesha, WI 53187
Oct 30, 2007 In addition to 255 hp, 660 lb torque IHC MaxxxForceDT, and Automatic Allison 3500_RDS_P transmission, 2008 4300 SBA 4x2 features PHEV propulsion system that minimizes fuel use and emissions. Unit can recharge at off-hours using electricity from nation's electric grid or at any point with conventional diesel engine. Battery management systems, in conjunction with control technology, also powers Terex material handling aerial device (TLM50M) for up to 8 hr of aerial lift operation time.

Atlas Copco Compressors, Inc.    Westfield, MA 01085
Oct 30, 2007 KT Series of 5-20 hp, 2-stage reciprocating piston compressors are suited for intermittent use in workshops and in light industrial applications. They are available in variety of configurations including horizontal or vertical tank mounted, duplex horizontal tank mounted, and gas driven tank mounted. For OEM applications, block unit is available by itself and can be combined with choice of driver.