Jungheinrich Lift Truck Corp.    Houston, TX 77043
Mar 14, 2008 Featuring 24 V, 3-phase AC-drive technology, Model EKS 110 enables operators to pick stocked items from 1st, 2nd, or 3rd level of racking. Truck offers lifting capacity of 2,200 lb, and can pick up pallets or crates both longitudinally and crosswise. With L version, platform and load section can be raised up to 118 in. allowing items to be picked from heights up to 15 ft. Auxiliary lift, or Z version, allows forks to be positioned at ergonomically correct height for operator.

Meese Orbitron Dunne Co.    Ashtabula, OH 44004
Mar 12, 2008 Rotationally molded of 100% polyethylene, reusable Ship Shape(TM) Bulk Container features 48 x 40 in. footprint, enabling professionals to eliminate pallets and unitize loads. Container also eliminates potential for phytosanitation contamination and supports environmental efforts to safeguard forest resources and minimize landfilling of failed pallets. Providing lift truck access from 2 sides, container is weatherproof and impervious to chemical attack, rust, and corrosion.

North Safety Products, Inc.    Cranston, RI 02920
Mar 12, 2008 Featuring mechanism that provides one ear plug at-a-time, single plug dispenser works with DeciDamp2 and Deci4200 Earplugs. Machine is available with bucket containing 500 pairs of ear plugs as well as wall mount. Table stand is optional.

Hardigg Industries, Inc.    South Deerfield, MA 01373
Mar 12, 2008 Measuring less than 24 in. wide, SuperMAC(TM) enables 2 cases to fit side-by-side in most military vehicles. Unit includes Comfort Grip Handles(TM), molded-in lid hangers, and molded-in rib design for secure stacking and interlock. Available with removable rack that allows full access to equipment, SuperMAC is suited for field-deployed equipment and sheltered applications that require medium-duty shock and vibration protection. Lock N Load(TM) latch system locks racks securely into place for transit.

Hardigg Industries, Inc.    South Deerfield, MA 01373
Mar 12, 2008 Offering light to medium duty protection, BlackBox(TM) is suited for field-deployed and sheltered applications up to 100 lb. Case uses recycled materials in shell and steel frame for equipment mounting. Measuring 24 in. deep, unit features one 2 in. front lid, one 5 in. rear lid with edge casters, molded-in rib design for secure stacking, and automatic pressure relief valve. BlackBox meets ANSI/EIA 310-C standards for universal rack mounting and exceeds ATA's Spec 300, Cat 1 requirements.

RNR Plastics, Inc.    Raynham, MA 02767
Mar 12, 2008 RNR EnviroVinyl(TM) Pockets are manufactured from materials that are low in heavy metal content, phthalate-free, and recyclable. They can be manufactured from 6-30 ga clear or colored PVC in 2 in. squares in sizes up to 24 x 36 in. Able to be die-cut, punched, and include windows and printing or embossing, products can incorporate specialty adhesives, grommets, and encapsulated rare-earth magnets.

Meese Orbitron Dunne Co.    Ashtabula, OH 44004
Mar 11, 2008 Available in capacities from 750-2,000 lb, Poly-Trux® truck line features molded, hinged split lid that permits cover of trucks to be opened and closed with one hand. Lid fits over outer rim when in its covered position to control odors; guard against personal contact with germs, sharps, and other hazards; and hide cargo from view. Trucks, suited for collecting refuse, scrap, laundry bags, and other cargo, and lid are rotationally molded of 100% weatherproof polyethylene.

Thomas Industries, Inc.    Sheboygan, WI 53082-0029
Mar 11, 2008 Measuring 4.25 x 4.63 x 3.02 in. and weighing 2.5 lb, 260 Series brushless DC WOB-L® air compressor and vacuum pump is designed for medical and other applications requiring lightweight pump with variable output. It utilizes efficient brushless DC motor, enclosed crankcase, and WOB-L® piston technology. With maximum flow of 1.5 cfm at high speed, pump also offers maximum pressure of 30 psig and maximum vacuum of 22 in. Hg.9

Capital Safety    Red Wing, MN 55066-5005
Mar 11, 2008 Including 11 and 15 pocket models, DBI-SALA's line of tool bags attach to full body harnesses by sliding onto belt before buckling, ensuring secure connection. Designed for employees working at heights, they are constructed of 1680D ballistic nylon with PVC reinforced pouch bases for puncture and tear resistance. Nickel-plated iron storm drains keep pouches ventilated, while plated iron rivets reinforce stress points.

Medicus Health    Grand Rapids, MI 49508
Mar 11, 2008 PETG Side Load Triple Glove Dispenser keeps each glove box in its own compartment, which helps replace empty glove boxes and keeps glove sizes separated. Wall mount box saves countertop space and provides infection control compliance. Capable of accommodating all glove box sizes with overall dimensions of 10.25 x 4 x 6 in., dispenser features flexible keyed mounting holes that allow boxes to be mounted with openings facing left, right, or up.

Iscar Tools, Inc.    Oakville, ON L6H5R3
Mar 10, 2008 Promoting systems intergration, MATRIX(TM) Series 4 automated tool dispenser offers flexibility of use, connectivity options, and data management. Scalable solution is installed to house inventory and feed back information regarding consumables use and replenishment requirements. Centrally managed, PC-driven cabinet is configured as sloping-fronted chest of 6-9 drawers 50, 75, or 100 mm deep. Any reconfiguration of bins within drawer is automatically recognized.

ITW Workholding    Traverse City, MI 49686
Mar 10, 2008 With no degradation of chuck performance in establishing 0.02 mm repeatability, V-Change (VC) Quick Change Jaw system permits top jaw changeover in as little as 5-10 sec in manual mode. Base jaw features precision ground diamond shape projection with multiple locating surfaces on which top jaw is positioned and spring-loaded pressure pin engages hole in top jaw for location accuracy. System can be used for both ID and OD chucking applications.

Schunk    Morrisville, NC 27560
Mar 10, 2008 Suited for loading and unloading machines and for handling both small and large workpieces, MAGNOS Magnetic Gripper MAU offers 1,675-6,700 lb max holding force. Light weight unit does not require electricity to maintain magnetic field and needs energy only for activation and deactivation. It can be adapted to any robot arm and top tooling can be contoured to any workpiece surface.

Skyjack Inc. / Boom Division    Guelph Ontario N1H 1B9, CD   Canada
Mar 10, 2008 Featuring direction sensing drive and steer control system, SJ 61T and SJ 66T telescopic boom lifts utilize axle based 4WD system that incorporates Detroit Locker type rear differential and limited slip front differential. Lifts include standard color coded and numbered wiring system along with relay based controls.

Schunk    Morrisville, NC 27560
Mar 07, 2008 Suited for small components, KONTEC KSK is 170 mm long with jaw width of 65 mm, clamping range of 0-152 mm, and clamping force of 20 kN at 65 Nm. Device can be used as clamping unit for raw parts or as precision clamping module with centering accuracy of 0.02 mm. Slide geometry enables KONTEK KSK to be integrated directly into change pallets without any base body.

Molded Fiber Glass Tray Co., A Div. Of Molded Fiber Glass Companies    Linesville, PA 16424
Mar 07, 2008 Designed to handle payloads up to 150 lb, stackable fiber-reinforced polymer (FRP) composite metal parts wash-boxes are engineered to withstand small-parts washing system chemicals. Product is dimensionally stable, cleanable in hot water or steam, withstand temperatures to 350°F, and can be customized to meet unique corrosion specifications. Offered in various sizes, boxes feature ¼ or 3/8 in. dia bottom holes and elongated 2 ½ x 5/16 in. side slots.

Physik Instrumente (PI)    Auburn, MA 01501
Mar 06, 2008 Suited for use in surface metrology and static positioning, PIHera® flexure-guided piezo nanopositioning stages are available in X, XY, Z, and XYZ versions that provide linear motion with up to 99.98% accuracy. These precision, closed-loop stages are equipped with non-contact, capacitive sensors and offer resolutions from sub-nanometer to 3 nm. Acceleration forces are provided by multilayer piezoelectric linear actuators, and vacuum-compatible versions are available.

MIXPAC Equipment Inc.    Salem, NH 03079
Mar 06, 2008 MIXPAC DXBG Dispenser allows A & B components of flowable adhesives to be gravity-fed from separate, refillable, 2 gal containers through integral DX dispenser, and components are then forced by metering rods directly into disposable static mixer. With ability to use bulk packaged materials, bench-top dispenser comes with foot pedal actuator, which allows for hands-free operation. Stand is fully adjustable over 3 axes and can accommodate wide range of product applications.

Caldwell Group, Inc., The    Rockford, IL 61109
Mar 05, 2008 Able to be expanded in 1 ft increments, Modular Spreader Beam helps riggers, crane operators, and contractors save time by using one beam for numerous operations. Spread adjustment is facilitated via faspin with lanyard, and beam can fit in back of pick-up truck when collapsed. Conforming to ASME standards and exceeding those of OSHA, product comes in 6 models that can be configured to spreads from 10-22 ft. Capacities range from 1-2 tons.

Pointer Telocation    Rosh Ha'ayin   Israel
Mar 05, 2008 Powered by lithium polymer battery, Cellocator(TM) CelloTrack offers standalone device for complete fixed/mobile, powerless/powered tracking of assets such as trailers, containers, trains, and cargo. This OTA-configurable and upgradeable solution, built to IP67 standards, offers communication channel redundancy (GPRS+SMS), integrated SIRFIII GPS technology, and 3D accelerometer. Additional functionality covers Geo-fence support and online event reporting.