Pelican Products, Inc.    Torrance, CA 90505
Jul 14, 2008 Designed to fit in most soft bags, watertight and crush-resistant 1090 HardBack(TM) protects all brands of up to 15 in. laptops from conditions experienced during travel. Composite shell is resistant to impact, heat, and chemicals, while plush foam liner protects against shock, and anodized aluminum latch ensures computer stays secure. Case also features tongue-and-groove lid construction, polymer o-ring, and automatic pressure equalization valve.

Montech, LLC    Huntersville, NC 28078
Jul 11, 2008 Consisting of self-moving shuttles that run along monorail track at speeds to 30 m/min, Montrac supports various components for operational efficiency. FlexTrac component, made of polyoxymethylene, makes it is possible to build sections with inclination up to 8% so Montrac can overcome height differences between machines/working stations. Touch-Panel component acts as independent direct addressing station that allows implementation of manual work stations.

Curtis Industries, LLC    Worcester, MA 01606
Jul 11, 2008 Sno-Pro Fast-Cast 2000 Series tailgate spreader features 5.0 cu ft/350 lb capacity, spreading width of 4-40 ft, and variable speed control. It includes 12 Vdc direct drive motor mounted in weather tight enclosure, and can be mounted on Class III receiver hitch. Made with heavy-duty powder coated steel frame and UV protected high-density polymer hopper, unit is suited for personal and light commercial applications.

ID Technology Corp.    Fort Worth, TX 76106
Jul 10, 2008 Suited for use in slow- to moderate-speed inline applications and table-top configurations, Model 250C can be built to meet demanding space-saving requirements. This compact printer applicator, while custom-built, uses same standard electronics and pneumatics as other versions. All models are configured for tamp application, with max stroke length of 8 in., and use label rolls no larger than 8 in. OD and 3 in. ID.

Anver Corp. - Anver.Com    Hudson, MA 01749
Jul 10, 2008 Able to handle large containers and products from side, Model VFP-57 features handle that extends from 36-60 in., and pivots for stacking. Adaptable to various loads, it has arm extensions which can adjust along beam and can come with wide range of vacuum suction pads. Available in capacities of up to 2,500 lb, unit can be equipped with air/electric vacuum pumps. Other features include handlebar controls, vacuum gauges, and audio-visual alarms.

Label-Aire Inc.    Fullerton, CA 92833
Jul 10, 2008 Compatible with most OEM printers, RFID configurable Label-Aire® 3138-NV Printer Applicator features split cover, tamp assembly field kit installation, electronics tray for top access, pneumatic panel for component replacement, and 1-10 in. adjustable tamp assembly with SS rods and locking collars. Label-Aire® 3015-ND Wipe-On Label Applicator can be converted to left/right hand use, and can apply labels to top, side, or bottom of products at dispense speed of up to 1,000 in. of web/min.

Medicus Health    Grand Rapids, MI 49508
Jul 10, 2008 Wire Shelving Kits with Preconfigured Storage Bins are designed to help healthcare facilities increase organization, reduce wasted storage space, and consolidate purchase orders. Kits are suited for organizing supplies in operating room, at nurse stations, or in supply storage rooms. Each heavy duty shelf has 800 lb weight capacity, and snap on caster sets are also available to make storage solution mobile.

Material Transfer & Storage, Inc.    Allegan, MI 49010 0218
Jul 09, 2008 Custom designed based on application requirements, FIBC Filling System includes horizontal pivoting and rotating bag fill carriage. Bag support carriage and fill head lower to programmed operator height, extend towards operator, then rotate for reach-free bag strap and bag spout connection. PLC controls and discharge conveyor optimize efficiency.

Ross Controls    Troy, MI 48083
Jul 09, 2008 Available with ¼ and 3/8 in. ports, manual L-O-X® Valves control airflow and are designed to meet OSHA regulations, ANSI standards, European regulation EN 1037, and Canadian Standard CSA Z460. When handle is pulled outward, air moves freely. Short inward push of handle shuts off airflow and opens exhaust port to release downstream air. Equipped with Teflon® seals, valves offer indicator port option for test point verification of absence of energy downstream.

Appleton Mfg. Div., Productive Solutions, Inc.    Neenah, WI 54957
Jul 09, 2008 Roll Mover(TM) allows single operator to safely move heavy rollable loads without tangled air hoses snaking across shop floor during or after manufacturing. Portable, tether-free, and battery-powered unit features toggle handle with variable-speed throttle that facilitates operating efficiency, rugged gearbox turns industrial-grade drive rollers that can push/maneuver any large product on wheels, and rugged construction facilitates extended use in demanding work environments.

Steel King Industries, Inc.    Stevens Point, WI 54481
Jul 09, 2008 Able to hold bundle loads up to 6,000 lb, and loads up to 20,000 lb on one side of column, I-Beam Cantilever Rack has no front column, making any load or storage slot immediately accessible. Featuring freestanding heights up to 20 ft and arm lengths up to 8 ft, it stores long, heavy, odd-shaped items without need to palletize. Columns, arms, and base are made of I-Beam structural steel with 50,000 psi minimum yield, and arms are secured to columns with grade 5 bolted connections.

C & H Distributors, Inc.    Milwaukee, WI 53214
Jul 09, 2008 Available in 72 and 84 in. heights, E-Z-RECT® Trim-Line Boltless Shelving features 5/8 in. particleboard shelves that attach to posts via boltless locking tab connection. Each 400 lb capacity shelf adjusts up and down on 1 in. centers to accommodate different sized items, and total capacity is 7,000 lb. Starters are complete stand-alone units with 4 shelves, 4 posts, and 8 beams, while add-ons include 4 shelves, 2 posts, and 8 beams and can attach to starters or other add-ons.

Eaton Corp.    Cleveland, OH 44114
Jul 09, 2008 Integrating electrical isolation, voltage transformation, power distribution, and maintenance bypass, Powerware® BladeUPS(TM) Maintenance Bypass Cabinet allows transfer of power to full system bypass to perform service, testing, and maintenance on Powerware BladeUPS without interrupting power to critical load. This 3-in-1 cabinet complements rack-based, 60 kVA Powerware BladeUPS parallel system, optimized for high-powered blade servers and high-density computing environments.

Novellus Systems, Inc.    San Jose, CA 95134
Jul 09, 2008 Designed for high-volume tungsten contact fill and interconnect applications, ALTUS® Max(TM) has processing capability to provide tungsten films that meet or exceed 20 nm memory requirements for fill, resistivity, roughness, and defects. It features PNLxT(TM) pulsed nucleation layer process technology, multi-station sequential deposition architecture, and SwiftTrak(TM) wafer handling. Chamber clean technology achieves single-digit defects at 65 nm particle size.

Sealant Equipment & Engineering, Inc.    Plymouth, MI 48170-0965
Jul 08, 2008 Based on No-Drip® design that integrates carbide ball-end needles with carbide seats for fluid control, 2200-545 Series Adjustable Stroke Mix-Dispense Valve can control flow of 2-component adhesives and sealants such as silicones, epoxies, urethanes, and acrylics. Measuring 2.25 in. dia and 5.5 in. long, double air actuated valves have two 1/8 NPT ports for 4-way pneumatic connections. Rated for 3,500 psi, valve is also available with eyelet stem for attaching to tool balance.

Gorbel Inc.    Fishers, NY 14453 0593
Jul 08, 2008 With capacities up to 150 lb, Pivot Pro(TM) light duty articulating jib crane features sealed tube design that eliminates need for festooning, reducing festoon pile-up and potential for reduced vacuum suction caused by kinked hoses. Articulating knuckle design offers safe operation by limiting whip of boom that can occur in high cycle applications. It can be used with all major OEM tube lifters, and is suited for high repetition applications like palletizing.

Keytroller Inc.    Tampa, FL 33614
Jul 08, 2008 Utilizing hydraulic bypass manifold module which is mounted behind the mast on forklift's firewall, VANGUARD can log weighing events in up to 99 different channels with up to 99 different weighing events per channel. Device is standard with RS232 serial port for exporting event log data and printing adhesive or receipt labels. All events are time and date stamped with accurate weight in chronological or channel sequence, and can be recorded in lbs or kgs.

LM-76 Linear Bearings    East Longmeadow, MA 01028
Jul 08, 2008 Suited for medical, pharmaceutical, semiconductor, and other applications where magnetism is an issue, DEFENDER features 1-piece rolled 304 SS construction, and can take radial and axial load of 170 and 89 lb, respectively. Sliding Carriage Block body features 3 hardened, 440C rollers with 2RS seals, and eccentric center roller allows for pre-load adjustment and smooth movement without clearance. Unit has operating temperature range of -30 to 100°C.

VEE GEE Scientific, Inc.    Kirkland, WA 98034
Jul 08, 2008 Suited for incubating diluted samples of clean water, wastewater, effluent water, and polluted water during 5-day biochemical oxygen demand (BOD) test, VEE GEE BOD bottles are available in packs of 6 and cases of 24. Meeting ASTM E-438 Type 1, Class A borosilicate glass specifications, bottles feature flared mouth to form water seal to prevent ingress of air during incubation, interchangeable pennyhead stoppers with tapered bottom, and permanent marking squares for flexible numbering.

Automated Packaging Systems Inc.    Streetsboro, OH 44241
Jul 08, 2008 Derived from ethylene vinyl acetate co-polymer resins, Low Melt Batch Inclusion (LMLT) film allows LMLT bags to melt and disperse into product being mixed and become minor component of finished compound. Film is suited for customers using batch inclusion bags for plastics products, soft rubber products, and adhesive manufacturing applications. It also suits applications with short mixing cycles, low shear rates, and for low temperature mixing.