Ironwood Electronics, Inc.    St. Paul, MN 55121
Oct 03, 2011 Mounted using supplied hardware on target PCB without any soldering, SG-MLF-7059 is designed for 3.5 x 2.1 x 0.65 mm package and operates at bandwidths up to 10 GHz with less than 1 dB insertion loss. Socket connects all pins with 10 GHz bandwidth on all connections, and contact resistance is 20 milliohms/pin. Additional specifications include 0.15 nH pin self inductance, 0.025 nH mutual inductance, 0.01 pF capacitance to ground, 2 A/pin current capacity.

Snap-on Industrial    Kenosha, WI 53143
Sep 30, 2011 Regardless of weather, location, or working conditions, All Weather Mobile Tool Chest provides secure, weather-tight storage for tools that must be readily moved. Telescoping, trolley-style handle and 22 in. wheel base facilitate mobility, while solid rubber wheels absorb shock of rough surfaces. Available configurations offer two 2 in. drawers plus six 1 in. drawers or three 2 in. drawers plus four 1 in. drawers. Able to be fully extended, sliding drawers accommodate foam cutouts.

Buckhorn, Inc.    Shelbyville, KY 40065
Sep 29, 2011 Measuring 48 x 45 in. with 25 or 34 in. height, Model BN4845 has structural foam panels and 31.7 in. wide drop down doors that are either 10.24 or 14.5 in. deep, based on height of box. Container includes ergonomic handles and 4 drain holes for outside storage. Featuring 100% recyclable design, box nests with competitive bins when upright or collapsed, and provides 4-way forklift entry. Multiple recessed areas and flat surfaces for labels facilitate RFID tracking.

Automated Packaging Systems Inc.    Streetsboro, OH 44241
Sep 28, 2011 Engineered using advanced polymer technologies, XD Blend provides thin, 0.95 mil material for use with AirPouch® Express(TM) 3 void-fill packaging system. Material comes pre-formed and fan-folded in box that contains nearly 5,000 ft of uninflated pillows, minimizing changeover times and storage space requirements. Part of EarthAware(TM) family of films, fully recyclable XD Blend contains additive that causes biodegradation in 9 months to 5 years, depending on exposure conditions.

F.R. Drake Company    Waynesboro, VA 22980
Sep 27, 2011 Capable of loading up to 600 pieces/min, Model LS-600 is designed for packaging lines operating at 1-1.5 tons/hour. Machine can handle variety of products up to 8 in. in length for bulk and retail packages. Four totally enclosed AC stainless steel motors drive equipment and withstand severe sanitation procedures used in RTE environments. Available with optional Drake BL-600 bag loading device, machine has completely guarded moving parts that can be disassembled and cleaned without tools.

ITW Muller    Arlington Heights, IL 60004
Sep 27, 2011 As secondary carriage, SideKick(TM) can be added to new/existing Octopus stretch wrapping machines. It operates as independent film carriage, automatically rotating into primary wrapping position upon film depletion/breakage. This eliminates downtime associated with waiting for operator response to film issues. Regarding maintenance, SideKick does not require additional cut, clamp, or heat seal system. It also allows removal of one carriage for maintenance so second can continue to wrap.

Guyson Corporation of U.S.A.    Saratoga Springs, NY 12866
Sep 26, 2011 To reduce number of nozzles required for uniform coverage and lower compressed air requirements, TR-900 is offered with oscillator to provide reciprocating motion of blast guns. Components are conveyed in/out of blast chamber via rubber or steel mesh belt that may be fitted with guide rails, cleats, or part-holding fixtures. Accommodating single- or multiple-lane media-blast treatment, system supports up to 14 blast guns and offers adjustable (0 to ~20 fpm) conveyor belt speed.

Airfloat Systems    Decatur, IL 62526
Sep 26, 2011 Using air bearing (air caster) technology, Airfloat adjustable paper roll transporter floats heavy paper rolls on cushion of compressed air. This lets one worker pick up and move rolls of varying sizes weighing up to 5,000 lb. After attaching transporter to compressed air system, operator slides forked platform around paper roll and closes adjustable forks. Lifting flaps gently raise paper roll directly off ground, and dimensions foster maneuverability in any direction.

Paratus Spray Foam Supply    Canton, OH 44706
Sep 21, 2011 Measuring 12 ft long with 4 ft V-nose, XTR1s hydraulic spray foam rig features frame construction that allows towing behind trucks starting from F150 and up in size. Complete solution includes PMC GH-25 hydraulic foam machine, 5 hp 15 cfm vertical air compressor, 160 ft of PMC heated hose, 220 V full shore power, and support for 2 sets of material, all contained in 12 ft, 7,000 lb GVWR V-nose shell.

Schunk    Morrisville, NC 27560
Sep 20, 2011 Equipped with servo motor, LEG 400 weighs 6.5 kg, offers variable stroke from 0-103 mm, and delivers gripping force of up to 1,050 N. Unit can be equipped with pneumatic and electric drive and is suited for use in metal cutting and automotive industries along with assembly and handling tasks. Both drive spindles are coupled if LEG is operated with single servo motor, and fingers move synchronously. With 2 motors, fingers can move to any position in gripping range independently.

OFS FITEL LLC.    Norcross, GA 30071
Sep 20, 2011 Serving up to 432 homes, Model 432 FDC combines fiber routing management with DirectConnect splitter, which allows incremental usage of splitters to minimize congestion while accommodating grow-as-you-go buildout. Unit can be fitted with SC or LC/APC connectors on splitter leads, and uses bend-optimized AllWave® FLEX Zero Water Peak fiber to minimize bending loss. Constructed of aluminum with powder coat paint, cabinet has front/rear access doors, rear cable storage vault, and pad mounting skirt.

Novatec, Inc.    Baltimore, MD 21225
Sep 16, 2011 Featuring color touchscreen, Siemens-based Novatec FXS PLCs handle polymer conveying systems with up to 20 pumps and 120 stations. Base panel controls up to 5 vacuum pumps, 32 material receivers with proportioning capability, and 25 purge valves. Three-port Ethernet interface permits access from any remote PC as well as connection of additional FXS or HMI modules. Expansion is accomplished via FlexXpand FXMS modules that connect to main control via ProfiNet communications network.

Aerotech, Inc.    Pittsburgh, PA 15238
Sep 16, 2011 With low profile of 85 mm, Series ANT130-XY offers travels up to 160 x 160 mm with 1 nm resolution, 75 nm repeatability, and 250 nm accuracy/axis. Stages utilize crossed roller bearings and direct-drive technology, which has no hysteresis or backlash, enabling accurate motion in both X and Y dimensions. Applications include data storage, semiconductors, laser micromachining, sensor testing, material deposition, and MEMS/nanotechnology device fabrication.

Terex Aerial Work Platforms    Redmond, VA 98052
Sep 16, 2011 Suitable for driving on almost any surface, Genie® S(TM)-40 has lift height of 40 ft and vertical reach of 31 ft, while S(TM)-45 Trax offers 46 ft lift height and vertical reach of 36 ft. Both have independent triangular track at each corner that can swivel 22° up and down. Active oscillating axles enable tracks to maintain contact with ground on uneven and undulating surfaces. Because tracks are encased in rubber, they minimize damage to sensitive ground surfaces such as turf.

Herkules Equipment Corp.    Walled Lake, MI 48390 1662
Sep 15, 2011 With 10,000 lb capacity, Electric-Hydraulic Scissor Lift Table has 16 in. lowered height with 30 in. of travel, 48 x 96 in. platform, and tubular steel scissors. Pushbutton up/down control pedestal also contains external power unit, and check valve included within high-pressure gear pump head lets operator stop and hold lift system at any position during normal operation. Heavy-duty lift system also includes 230 Vac, 3 HP, 60 Hz, 3-phase, NEMA-4 motor and unidirectional flow control.

Essemtec Ag      Switzerland
Sep 15, 2011 Accommodating 2 dispensing heads simultaneously, Model CDS6200 utilizes micro-dispensing valves that can be modularly adjusted for numerous applications. Valves are suitable for small dosing dot sizes and non-contact dispensing applications such as dosing LED lenses. Designed to dispense small drops from 2 nl, valves can be exchanged, and fluidic part can be separated from drive part for cleaning and maintenance. Machine supports 3D-MID, which allows LEDs to be placed in any angle and direction.

EV Group Inc.    Tempe, AZ 85284
Sep 14, 2011 Designed for integrated and automated loading, alignment, bonding, and unloading of wafers up to 300 mm in diameter, GEMINI FB supports CMOS image sensors and 3D integration applications. Local material buffer enables 10 front opening unified pods on system for continuous mode operation. To accelerate wafer handling, system utilizes double-end effectors. Low temperature plasma activation enables wafer bonding and stress/damage-free annealing at less than 400°C.

Newport Corp.    Irvine, CA 92606
Sep 13, 2011 Based on stiff-body design, stand-alone IMS-LM-SA Series suits applications that carry up to 10 kg loads. Self-supporting stages are available in 800, 1,000, and 1,200 mm travel capacities, and all feature industrial-grade, direct drive linear motors; direct read linear encoders; recirculating ball bearings; and stiff, FEA-optimized aluminum base. Also standard, 4-point mounting method ensures stability even when mounted on less than ideal, flat surfaces.

Anver Corp. - Anver.Com    Hudson, MA 01749
Sep 13, 2011 Featuring articulating handle with fully integrated controls and vacuum gauge, Anver VB-Series Vacuum Lifter-Tilter lets one person pick-up and load coiled products into assembly and packaging equipment. System combines electric hoist and pneumatic-powered, 90° tilter to eliminate manual bending, lifting, and twisting. Offered in 250 and 500 lb capacities, product comes with remote power station and employs 10 in. dia foam suction pad.

Pro-Link, Inc    Canton, MA 02021
Sep 13, 2011 With permanent divider separating cleaning solution from rinse water, Advanced Microfiber System (AMS) Split Bucket II helps reduce cross contamination. Dual bucket system, designed for use with Pro-Link folding mop holder and Mega-Loop(TM) microfiber folding mops when used with optional roller wringer, also has integral bottom drains. Height of handles and bucket further reduce worker strain, and optional Extra Capacity Down Press Wringer lets facilities use traditional wet mops.