Revvo Caster Co., Inc., The    West Seneca, NY 14224
Oct 09, 2008 Featuring either roller, taper roller, or precision ball bearing, H Series casters are available in diameters of 4, 5, 6, 6¼, 8, 10, and 12 in., with load capacities ranging from 330-3,300 lb. They use bolt-on style directional locks, which are bolted on underneath top plate, using top plate mounting bolts. Swivel models are fitted with oblong top plates, with wheel options including rubber tire, cast iron, phenolic, green rubber, steel, nylon, and standard polyurethane.

DecaWave    Dublin   Ireland
Oct 09, 2008 Accurate to 10 cm, ScenSor (Seek, Communicate, Execute, Network, Sense, Obey, Respond) can locate up to 11,000 assets within 20 m radius. This Ultra Wide Band (UWB) Real Time Location Service (RTLS) solution can locate assets throughout building, even if they are moving, when deployed in mesh network. Product is fully compliant with IEEE802.15.4a standard.

Material Transfer & Storage, Inc.    Allegan, MI 49010 0218
Oct 08, 2008 Designed for Class I, Division II, Group D, explosionproof service, PowerFill(TM) features 316L stainless steel product contact surfaces, Power-Lift(TM) fill head height adjustment system, stainless steel loading deck, bag present sensor, and fully integrated bag inflation package. Housed in pressurized NEMA enclosure, it also features dust-tight inflatable spout seal, wash down duty weigh modules, and digital weight indicator to ensure precise, dust-free material filling.

Thomas Equipment, Ltd.    Centreville, NB E7K3G4  Canada
Oct 08, 2008 Featuring high-lift bucket height over 11 ft, operating weight of 7,200 lb, lift capacity of 1,850 lb, and over 2 tons of breakout force, Thomas 185 Skid Steer Loader upgrades and replaces Thomas 175. It is powered by 4-cyclinder 59 hp Tier-3 engine that meets environmental standards and moves at nearly 8 mph. Loader also features 2 in-line hydrostatic pumps to lift, pull, and hoist, dump height over 9 ft, sure grip 8- or 10-ply tires, and range of attachments and options.

C & H Distributors, Inc.    Milwaukee, WI 53214
Oct 08, 2008 Used to move parts and supplies to jobsite, Mobile Wire Bin Shelving features red, yellow, or blue polypropylene Quantum shelf bins with reinforced side ribs, wide hopper fronts, and slotted label holders for product identification. Units are 80 in. high and roll on four 5 in. polyurethane casters (2 swivel, 2 swivel with brakes), all of which feature non-marking donut bumpers to protect walls and equipment. There are 8 adjustable chrome shelves that support up to 800 lb.

Jergens, Inc.    Cleveland, OH 44110
Oct 08, 2008 Eliminating need to disconnect and reconnect 2 hydraulic hoses as column rotates, Hydraulic Vise Column delivers hydraulic power that ensures consistent clamping force, and up to 4,700 lb of clamping capacity. Each vise can be independently operated, while compact rotary coupling does not interfere with tooling. With stand-alone design that can be retrofitted in field, product is available in 4 and 6 in. jaw sizes and in 3- or 4-sided configurations.

Sullair Corporation    Michigan City, IN 46360
Oct 07, 2008 Sullair 7500 S-energy® Series Compressors with Energy Efficiency System (EES) heat recovery feature low-restriction inlet valve, low pressure drop air-fluid separation system, and high-efficiency fan. Lubricated rotary screw air compressors are available in 100 hp constant-speed and variable-speed drive models with capacities of 369-493 acfm and pressures from 100-175 psig. They include WS Microprocessor Control System and can be monitored and set-up using Windows-based PC.

Norgren    Littleton, CO 80120
Oct 07, 2008 Model VS45 features plug-in subbase manifold that is fully modular and is offered in 3/8, ½, and ¾ in. port sizes. Unit offers pressure capabilities of vacuum up to 232 psi and flow up to 4.20 Cv. Suited for heavy industry applications, valves include both softseal and glandless spool technologies.

Eriez Magnetics    Erie, PA 16506
Oct 07, 2008 Available in 2 magnet diameters, 1- or 5/8 in., Sight Glass Magnets are designed for removal of fine and weakly magnetic ferrous contamination from material flows traveling to molding machines. Offered in 4 sizes, they are equipped with super strength rare earth magnet material to remove fine iron contaminants and reduce product wash-off. Magnets help prevent product defects, plugged valve gates, machine damage, and downtime.

Jungheinrich Lift Truck Corp.    Houston, TX 77043
Oct 06, 2008 Utilizing 3-phase AC technology in drive, hydraulic, and steering systems, EFG 213-220 and EFG 316-320 series offer capacities from 2,500-4,000 lb. Operator can charge and change battery via access from side of truck, and several battery extraction methods are available. On EFG 213-220 Series, there are six 3-wheel chassis variations suited for maneuvering in restricted spaces. Five 4-wheel chassis variations of EFG 316-320 Series are suited for applications involving longer runs.

Universal Package Systems, LLC    Dale, IN 47523
Oct 06, 2008 At 34 in. tall, plastic bulk container features 32 x 30 in. footprint and hopper style bottom designed to store and dispense fasteners, screws, and other small, uniformly shaped items. It has pallet-style base, accessible on all 4 sides, for movement with forklift or pallet jack when full or empty. Slide gate allows product dispensing via gravity at controllable flow rate. Unit has smooth, angled interior and is designed to handle up to 1,200 lb.

Numatics    Mt. Pleasant, TN 38474
Oct 06, 2008 Available in ½, ¾, 1 1/16, 1½, 2, 2½, 3, and 4 in. bore sizes, NB Series interchangeable compact air cylinders have cylinder tube constructed of impact resistant and self-lubricating high strength composite material. They include composite bearing material Duralon®, which is resistant to corrosion, moisture, and temperatures up to 325°F. Options include non-rotating piston rod, multi-stage, and multi-position, as well as standard double-rod and single-acting configurations.

Safe Rack, LLC    Sumter, SC 29150
Oct 06, 2008 Featuring 4 wheeled towable trailer, Mobile Transloading Unit is designed for safe custody transfer of wide variety of liquids. Unit is suited for truck as well as railcar transloading, with common transfer equipment located on trailer beneath transloading racks. Truck side of unit features grounding protection, overfill monitoring, and metering of custody transfer, while railcar side allows options for unloading, as well as safe access to hatch area of railcar.

LMC Workholding    Logansport, IN 46947-7006
Oct 03, 2008 Designed to turn long shaft-type workpieces, Richter manual steady rests are available in standard, special, and large ring styles, with diameters from .788-59.1 in. and load capacities ranging from 2-30 tons. Various models include gas springs, rotating, traveling, C-form, grinding, roller, and ring steady rests. Some feature electronic measuring device that allows steady rests to identify center of machine and sleeves.

Witt Industries, Inc.    Mason, OH 45040
Oct 03, 2008 Keeping discarded documents locked away, Secure Document Containers prevent confidential information from ending up in wrong hands. All units are fireproof and designed to comply with HIPAA and FACTA standards. Containers are suited for technology centers, financial institutions, health care organizations, executive areas, government facilities, or wherever security is imperative.

New England Machinery, Inc.    Bradenton, FL 34203 5304
Oct 03, 2008 Designed to accept and convey rectangular, square, and round bottles with centered necks and/or handles, in-line Model SO-4 distinguishes bottle's incoming orientation based on container symmetry using variety of inspection methods, and orients bottles accordingly. Self-contained, free-standing unit can orient 90, 180, and 270°, depending upon inspection results. Hand crank or electric height adjustment allows unit to be raised when not in use and lowered for next changeover.

Triple Diamond Plastics    Liberty Center, OH 43532
Oct 02, 2008 Featuring replaceable rail system and snap in replaceable handles for assembly and collapse, 30 x 32 collapsible bin is available in varoious heights and comes with 2 drop down doors for access, 2 ID tags, and 2 placards. It has passed all AIAG testing and is compatible with all bins for stacking purposes.

Durham Manufacturing Company, The    Durham, CT 06422-2108
Oct 02, 2008 With overall height of 54 in., A-Frame truck is offered with louvered panel on one side and steel pegboard on other, steel pegboard or louvers on both sides, and louvered panels and steel pegboard on both sides. Each configuration is fitted to 1½ in. angle iron A-frame mounted on 12 ga steel deck measuring 48 x 30 in. with 1½ in. lip up. Unit's deck has reinforced channels and rides on 6 x 2 in. phenolic casters, 2 rigid, 2 swivel, with side brakes.

Mitee-Bite Products Inc.    Center Ossipee, NH 03814
Oct 01, 2008 Comprised of cam screw and hardened washer, Knife Edge Clamp is made of hardened steel and features sharp edges to optimize grip on castings and rough cut material. Low-profile product is suited for clamping castings because it follows contour of workpiece for optimal holding, and tightening workpiece is accomplished with ¼-turn of screw. Available with 3/8-16, ½-13, and 5/8-11 size screws, clamp helps increase production and conserve space.

Techno Sommer Automatic    New Hyde Park, NY 11040
Oct 01, 2008 Designed for food-handling applications, GGL3060 features corrosion-resistant, stainless steel design that is sealed to IP69K standards and withstands high-pressure and high-temperature washdown cleanings. Angular design provides up to 24 lb-ft of gripping torque, and ability to swing open to 180° enables jaws to clear material below gripper. Solution meets DIN 1672-2 guidelines for hygienic food production machinery, and also features jaw position sensors.