Slater Tools, Inc.    Clinton Township, MI 48038 1554
Jan 19, 2009 Available with 5/8 and ¾ in. as well as 16 and 22 mm shanks, 0700 series Swiss Type Adjustment Free Rotary Broaching Tool Holders are used for producing hexagon and square holes in metal parts while eliminating secondary operations. While .500 in. tool bore in spindle accepts Slater standard-length hex, square, and 6-lobe rotary broaches, special form broaches with serration, spline, involute spline, and polygon shapes can also be made for 0700 series.

FKI Logistex North America    St. Louis, MO 63132
Jan 19, 2009 Featuring modular design that promotes system flexibility, LS-4000E tilt-tray and LS-4000CB cross-belt sorters respectively consume 2.4 and 2.7 kW/hr (typ). This can be accomplished because integrated linear synchronous motor (LSM) drive generates propulsive force via electromagnetic energy, minimizing energy consumption and noise levels while increasing speed and positioning accuracy.

Weatherchem Corp.    Twinsburg, OH 44087
Jan 19, 2009 With tear-drop shaped orifice and sharp cut-off lip, LiquiFlapper® Closure provides controlled directional flow of liquids, eliminating mess and run-off. One-piece design has durable hinge and closes with audible snap. In addition to liquid condiments such as marinades, sauces, salad dressings, syrups, and creamers, closure is suitable for controlled dispensing of non-food products, such as liquid detergent and chemical refill applications.

United Conveyor Corp.    Waukegan, IL 60085
Jan 19, 2009 Suited for pulverized bituminous and sub-bituminous coal boilers, VAX(TM) vibratory ash extractor features vibrating bed to cool ash from 1,800 °F to 500 °F and optimize combustion. Vibratory conveyor in unit can resist large slag falls and absorb clinker impact, reducing stress to bin capturing bottom ash. Conveyor vibration velocity automatically compensates for load fluctuations and cooling airflow capacity. Extractor can handle material temperatures up to 800°F.

Ruger Industries, Inc.    Cleveland, OH 44139
Jan 16, 2009 Featuring totally welded fabrication, manual and full power floor cranes have structural tubing with ¼-½ in. wall thickness and may also be custom-engineered. Standard lifting capacities range from 2,000-6,000 lb, and construction accommodates continuous industrial use in pharmaceutical manufacturing, cleanroom, electronics manufacturing, and food processing applications. Lubricated casters make cranes capable of navigating standard door openings, narrow aisles, and elevators.

Siemens    New York, NY 10022
Jan 16, 2009 Utilizing image processing and matrix of several belt conveyors, Visicon Singulator is designed to singulate items with appropriate gap between them and to align them for further sortation downstream. System can singulate up to 9,000 items/hr continuously without recirculation, minimizing required floor space. Software-based control system makes it possible to stipulate important singulation parameters such as gapping, orientation, and left or right take-away direction.

Fixtureworks    Fraser, MI 48026
Jan 16, 2009 Offered in 11 styles, Kipp NOVO-GRIP® carrying, lifting, and open/close pull handles are available in cast iron, duro- and thermoplastic, stainless steel, and aluminum to accommodate varying tasks and environmental conditions. Ergonomic design elements, lending to efficient operation and comfort, include full round, oval, or contoured rectangular profiles. Available lengths extend from 55-600 mm, and load bearing capacities range from 500-1,500 N.

Siemens AG    Munich D-80333  Germany
Jan 16, 2009 Equipped with linear induction drive system, Variosort EXB120 is capable of sorting goods ranging from 0.1 x 0.1 x 0.1 m to 1 x 0.6 x 0.6 m. It can be configured with inclines and declines as well as curves with diameters of 3.5 m and more. Sorter makes it possible to individually control each belt conveyor on carrier, and with Industrial Wireless LAN product, communication between stationary control system and carriers requires no contact and takes place in real-time.

Newson Gale, Inc.    Lakewood, NJ 08701
Jan 16, 2009 Bond-Rite EZ comes equipped with heavy-duty stainless steel clamp fitted with jaw grip able to clamp onto virtually any surface. It is available with with 10, 16, or 32 ft retractable Cen-Stat® cables, or with portable cable reels with up to 100 ft capacity. Flashing green LED indicator signals existence of safe connection to ground. Product is approved as Intrinsically Safe by FM and CSA for Class I, II & III, Div 1 & 2, hazardous locations.

KUKA Robotics Corp.    Clinton Township, MI 48036
Jan 15, 2009 Suited for Material Handling and Logistics industry, automated KR 500 570-2 PA employs heavy-duty robot with 570 kg max payload capacity and 3 algorithms for mixed and unmixed palletizing. It is tooled with servo-controlled layer gripper, which can remove entire layers from pallet of any material in one cycle. Servo layer gripper motors, synchronized with KR 500 570-2 PA, streamline operation when mixing different product layers on same pallet.

Whipple Enterprises, Inc.    Volcano, CA 95689
Jan 15, 2009 LP (Low-Profile) Series of Mini-Mover conveyors is available with Razor-Link(TM) option, which accelerates and facilitates modular setup for close-proximity applications such as multi-station transition, small-parts transfer, and 90° turns. Razor-Link assembly ha narrowed nose profile that tapers to depth of 0.8 in. and allows conveyor end to touch or link to adjoining station without belt interference, unit-to-unit gap, or need for bulky mounting hardware.

Bluco Corp.    Naperville, IL 60563
Jan 14, 2009 Specifically designed to fit Bluco's Modular Fixturing Tables, Wolverine Clamps are rated for over 100,000 cycles and are available in horizontal and vertical styles for D16 and D28 fixturing systems. Corrosion-resistant units lock quickly, positively release instantly, and allow maximum clearance in open position. Drop-forged body components, machine-reamed bearing surfaces, and hardened steel pins and bushings assure positive clamping when facing high pressure and vibration.

Caldwell Group, Inc., The    Rockford, IL 61109
Jan 14, 2009 Available with adjustable lifting points for balanced lift, Model AMCS, non-marring adjustable lifting clamps have capacities of 551 or 1,100 lb. Two models of series come with multiple load ranges, and feature pivoting pads to align with load surface for proper contact.

Techno, Inc. - CNC Router Systems    New Hyde Park, NY 11040
Jan 14, 2009 Model ZR20 is operated by 2-phase stepper motor with 20:1 ratio; at 200 steps per revolution, half step, resolution of motor is 2.7 arc/min and it can handle 10 kg maximum load. Internal limit switch performs homing functions and NEMA17 frame stepper motor is prewired into DB9 connector, facilitating setup. Able to be mounted to any assembly via 6 through holes on mount flanges, ZR20 is suitable for pick and place, assembly, testing, inspection, dispensing, and part transferring applications.

HK Systems    New Berlin, WI 53151
Jan 14, 2009 Able to readily transport 8-24 in. cases and totes, HK75/x series features scalable design with dual and independent lift carriages as well as dynamic shelving that maximizes space utilization. Automated storage and retrieval (AS/RS) machine, suited for applications requiring dense storage and high throughput for diverse set of SKUs, cases, and/or totes, supports various extractor mechanisms to promote efficient and responsive supply chain.

Almco, Inc.    Albert Lea, MN 56007 2751
Jan 13, 2009 With small opening between spinning and stationery components at base of machine, Model ACDF-75 keeps tiny parts from disappearing during finishing process. Urethane-lined bowl does not require frequent relining, which saves equipment downtime. PLC-equipped for precision deburring, machine offers variable speed and is available in 4 sizes to accommodate varying part dimensions and batch quantities. Part/media separation screens are included to minimize operator involvement.

Triangle Technologies, Inc.    Bartlett, IL 60103
Jan 13, 2009 Suited for operations where steel strapping is preferred for package protection and reliability, Model 455 High Capacity Strap Dispensing System utilizes jumbo size coils to minimize change-out frequency. Dispensers may be right- or left-handed and come in versions that accommodate coil weights up to 1,000 lb (455-1K) and 2,000 lb (455-2K). Featuring back feeding accumulator, both accept coil face widths from 6-12 in. and strap widths from 3/8-2 in. using available optional features.

Caldwell Group, Inc., The    Rockford, IL 61109
Jan 13, 2009 With capacities ranging from 551-2,200 lb, Model CGCS concrete grabs adjust load size automatically within given range. They are available with serrated steel cams to securely grip load or polyurethane pads to grip load without damaging surface. All models come with manual latch. Grabs are designed to handle cured concrete products.

Eagle Group    Clayton, DE 19938
Jan 13, 2009 Incorporating heavy-duty QuadTruss® wire shelving with a bracket design, wall mounted shelving kits allows for freedom to position shelving anywhere on brackets - left or right - without the need for fasteners or tools. Measuring 18 in. wide and in variety of lengths ranging from 24-60 in., kit shelves allow for maximum air circulation with open-wire construction. Shelving kits are available in 3 or 5 tier configurations.

United Conveyor Corp.    Waukegan, IL 60085
Jan 13, 2009 Designed to meet stringent emission requirements of utility and industrial facilities, UCC Reagent Handling Systems are suited for use with limestone, pebble lime, hydrated lime, trona, and magnesium oxide reagents. Splitter design resists clogging and results in even distribution of reagent at each injection port. For coarse limestone applications, optional abrasion-resistant ceramic components provide optimal wear life.