Expand International of America, Inc.    Stratford, CT 06615
Feb 02, 2009 Designed for multimedia and displays industry, Expand MonitorStand can be used as freestanding monitor holder, or can be completely or partially integrated with Expand 2000. Pole is available in heights of 48 1/16, 68 7/8 and 76 3/4 in., and weighs 6.2-9.25 lb. Foot, including adaptors and fastening device, weighs 28.2 lbs. Pole is made of aluminium while foot is constructed of cast iron with chrome accents.

ERICO    Solon, OH 44139-2631
Feb 02, 2009 Made from high-copper content alloy, Fence and Gate Post Clamps connect to ground conductor, and allow it to dissipate energy into low-impedance grounding system. Tinned clamps provide theft-deterrent appearance, and feature stainless steel bolts, nuts, and washers, and each clamp is marked with corresponding part number and conductor range. Applications include lightning protection, fault current ground, signal reference grid, and static ground.

Opw Engineered Systems    Lebanon, OH 45036
Feb 02, 2009 Used at major oil terminals, Model 1004D3 API Bottom-Loading Coupler features 5-cam design that ensures alignment, tight adapter connections, and resistance to side forces while loading. Dual interlocks ensure that coupler cannot be opened unless it is properly connected to API adapter. Other features include dual O-rings, Viton(TM) seal compound that is compatible with most petroleum products, and nose seal that can be replaced without removing coupler from rack.

Poclain Hydraulics, Inc.    Sturtevant, WI 53177
Feb 02, 2009 Incorporated into chassis of industrial vehicles, compact MG02 motor offers pivot function, steering attachments, and bevel stops on casing, which simplify assembly of motorized steering wheels on chassis. At 38.3 kg with maximum length of 303 mm/width of 270 mm, device offers torque from 273-633 Nm and displacement from 86-398 cm³/tr. It includes attachments for connection to steering cylinders and is available with or without friction brakes.

Ammeraal Beltech Modular (Uni-Chains)    Reading, PA 19611
Feb 02, 2009 Able to replace stainless steel wire mesh belts used in blanching, cooking, and steaming applications, uni BLB design combines plastic with stainless steel (SS). This ensures conveyed products, such as fragile fruits, vegetables, rice, and pasta, are only in contact with plastic while also ensuring belt has strength and high-temperature resistance of steel.

American Crane & Equipment Corp.    Douglassville, PA 19518
Jan 30, 2009 Designed per CMAA Specification No.70 Revised 2004, Low Headroom Built Up Hoist is available in capacities up to 300 tons and is targeted for high speed and heavy duty service. Features include Magnetek Electromotive AFD controls, hardened steel wheels, and helical travel drive gearing, along with forged steel hook, hardened steel sheaves, and double grooved drum for true vertical lift. Optional features, such as hardened drum grooves and redundant brakes, are also offered.

Nordson Corp., Packaging Systems    Duluth, GA 30097
Jan 30, 2009 Featuring FP-900 swirl gun, Rhino® pump, hose, and suspension package, FP-900 Handguns facilitate manual application of ambient-temperature, moisture-cure adhesives in horizontal or vertical flat panel processes. Guns offer 360° rotation and allow both left- or right-handed operation. Selection of nozzles provides pattern flexibility, while external mix design maintains positive separation of adhesive and process spray air.

Van der Graaf Inc.    Lithia Springs, GA 30122
Jan 29, 2009 Available in 6.5 and 8.5 in. dia, internally driven Cross Drive(TM) has no external moving parts and thereby eliminates possibility of employee injury and/or product contamination. Transfer of power from motor's drive shaft to drive roller's outer shell is 96% mechanically efficient, made possible via hardened-steel, precision-cut gear assembly. Latter is housed in sealed conveyor drive roller and connected directly to external motor, eliminating need for chain/sprocket or belt/pulley.

Hannay Reels, Inc.    Westerlo, NY 12193 0159
Jan 29, 2009 Featuring slotted divider disc with 2 in. space for storage of short cable, mid-size AVD-3 reel is designed for use with cable in audio/visual settings including radio and television stations. It also features rugged steel and aluminum construction, side-mounted connector panel, ergonomic carrying handles, frame clips for stacking, and adjustable Cam-lock drag brake for locking cables in place. Caster wheel option allows user to maneuver around objects.

Crossing Automation, Inc.    Mountain View, CA 94043
Jan 28, 2009 Enabling throughput rates to 250 wafers/hr, ExpressConnect(TM) components are offered as system of 5 modular building blocks that are combined to generate unlimited configurations for wafer automation. Products include Shuttle-Lock(TM), used to perform all wafer transfer functions; SEC-1000 Equipment Controller; Trans-Center(TM) 6-9 wafer load-lock module; Multi-Wafer Buffer, 4-wafer transfer module; and Dual Wafer Load-Lock entrance/exit point.

Chatsworth Products, Inc. (CPI)    Westlake Village, CA 91361
Jan 27, 2009 Scaling to various equipment depths, F-Series TeraFrame(TM) Cabinet System includes adjustable mounting rails that slide front-to rear, allowing utilization of entire depth of frame. Depth support markings allow positioning of rails vertically and horizontally. Units also include drop-in stud/nut hardware, sliding front-to-rear, that let accessories be mounted and repositioned; detachable side panels and doors; and top-mount slide for attaching CPI Cable Runway and Tray products.

Rittal GmbH & Co. KG      Germany
Jan 26, 2009 Featuring welded framework, Model TS 8 is equipped with stable transport casters, which allow mobility, even when rack has been configured. Both front door and vertically divided rear door are perforated over large area, permitting airflow. Doors' comfort handles are fitted with security locking system, and leveling feet can be adjusted from inside. Equipped with pullout stabilizers, bayable unit is available in classic gray and jet black.

ID Technology Corp.    Fort Worth, TX 76106
Jan 22, 2009 Featuring anodized aluminum construction for protection from corrosive environments, Model ST1000 applies various sizes and shapes of pressure sensitive labels. Top, bottom, and side applications are accomplished with angled U-arm for positioning of applicator head to product. With tamp module, Model ST1000 can be used for recessed areas, indexing lines, and variable speed lines. Additional features include left-hand and right-hand design and touch-screen display.

Rush Machinery, Inc.    Rushville, NY 14544
Jan 22, 2009 Designed for processing flats, angles, and radii on diamond/CBN single wheels and multiple wheel packs, Models FC-250EX and FC-700EX Automatic Diamond and CBN Wheel Truing and Dressing Machines feature PLC-controlled, automatic dressing cycles with servo-driven dressing wheel infeed, power swing, and oscillation. With wheel diameters up to 28 in., other features include ExVision, a computer-driven vision system with software program; an automatic power zoom; and a 2-axis DRO for measurement.

Gorbel Inc.    Fishers, NY 14453 0593
Jan 22, 2009 Suited for localized lifting and precision placement applications, Easy Arm® integrates G-Force® Q and iQ lifting technology as well as processor-controlled servo-drive system into articulating jib design. It acts as extension of operator's arm and can lift any weight within 165 or 330 lb capacity range. Since actuator is mounted on pivot, arm is lightweight and easy to move. Self-contained unit comes pre-assembled with spans up to 14 ft.

Diamond Phoenix Corp.    Lewiston, ME 04241
Jan 21, 2009 Acting as storage/retrieval unit for moving items, rail guided stacker crane system helps companies improve productivity, inventory control, and floor space usage while also reducing worker fatigue. Density and rate of operation can replace conventional static rack or carousels to optimize vertical storage space. Effective in forward pick operations, crane also suits applications that include buffering and storage of raw materials, work-in-process, and finished goods.

Kurt Manufacturing    Minneapolis, MN 55421
Jan 21, 2009 Available in manual and hydraulic models, 4 in. Model HDLM4 is suited for machining small parts such as medical and electronic devices, while 6 in. Model HDLM6 is suited for machining larger parts such as aerospace components. Both units provide repeatable clamping in 2 clamping stations to 0.0002 in. Designed on 80,000 psi ductile iron body with precision machined steel components, vises deliver up to 6,316 lb of clamping force at 70 lb of torque.

Clampco Products, Inc    Wadsworth, OH 44281
Jan 21, 2009 Featuring max torque rating is 20 lb-in., Micro Series worm gear clamps are manufactured with 300 series stainless steel housings and bands that are 5/16 in. wide. This promotes optimal performance in tight areas as well as small diameter hoses and air/fuel lines. Conforming to SAE J 1508 standards, products may be specified as Series 90037 for zinc-plated worms or Series 90038 for stainless steel worms.

Martin Engineering    Neponset, IL 61345 9766
Jan 21, 2009 MARTIN® Removable Air Cannon Discharge Nozzle eliminates need to dismount air cannon from outside of vessel to change nozzle from inside, minimizing downtime. Device consists of outer collar, permanently mounted on outside of vessel, to which replaceable inner fan nozzle mates. Interlocking system allows nozzle to be positively positioned so air cannon discharge is properly directed.

Bee Valve Inc.    Elyria, OH 44035
Jan 21, 2009 Guide-rib system features guide locks manufactured of glass-reinforced nylon for maximum strength/chemical resistance and to eliminate cross-threading. Locks consist of male adapter with spray nozzle threaded opening, available in 4 sizes, while cam lever, female guide lock coupler is offered in 2 sizes. EPDM gaskets, coupler handles, and handle locking pins are also incorporated. System is available in self-aligning single- and double-rib designs.